开云体育

Uploaded to the files section.

i was writing to a Crestron ATP card & still got the too small message

At the Crestron NEXT roadshow events, they showcased a new product line of 'tunable' lighting that you're looking for... It is *supposed* to be delivered 1st Q, but will see... They are making the

It's in the Crestron database, everybody has it, if you have the Crestron suite of software, then you have it.

I might add that it could be that Crestron has run out of high endurance flash cards too.? If that is the case, well than you will have to settle for consumer grade flash cards. Also, I used the FREE

The astronomical clock is a symbol in your Crestron Database.

Hi, I have a similar problem with a CP4N not staying connected to a QSC 510 Core. The QSC Core firmware is 9.1.2 and the CP4N firmware is 2.6000.00026 The errors I get is this: Error: SimplPlus[App01]

yes, i realize the generic cards i ordered are not equivalent to the high endurance ATP cards but, more an experiment to see if i could get them working again

Dear All, Can anyone share Crestron Astronomical Clock Lighting Control Modules.

Please share again Astronomical Lighting Control Module. > >

For a MC3 not using USB-Ethernet devicenum is always 0 Get Outlook for Android<https://aka.ms/ghei36> ________________________________ Sent: Friday, February 4, 2022 2:35:47 PM To: [email protected]

I think your best option is to send it to Crestron and have them replace the memory.? The reason I say that is because: 2GB high endurance SD cards (non-SDHC) are hard to come by.? At least my MC3

I use the heck out of copy/paste special. Ctrl+C, Ctrl+Sft+V.

have MC3 up, but fixed IP on another subnet trying to use DHCP command from text console, but can't figure out what device_num is?? i.e. DHCP device_num ON

i had to move to my laptop and use the SD slot trying to use the SD slot on my monitor via USB3 got me the i/o error every time

Not certain if I am asking this correctly. When writing a Simpl# program, are you suggesting, to keep all code within the ControlSystem.cs? I would think that having code broken out into several cs

I don't think you can do 3d arrays, so you can use a struct instead: STRUCTURE preset { STRING button[24][25]; }; preset presets[12]; Then you can address each individually or loop through them:

Create an array and loop through it?

I want to simplify a SIMPL+ program I have 12 Presets with 24 buttons in each one. The name of each button is a text that the user can change. I declare them as such: STRING button_memory_P1[24]25]

maybe howard and ray are ill. when i got one failed, aka Tony, i wrote a new 2gb sd card with an old image i had from my own mc3, aka Fafi, and it worked. this makes me thing that: Fafi image is good.