开云体育

If you assign signals to all the user attribute feedbacks then you’ll see in debugger the descriptions of each populate when you first load the driver. That’s how you know what goes where. Same

Thanks guys. The other reason I was (and still am) is because I generally pick either the cheapest or the most expensive option.? Home is a middle ground but it seems to me if someone would spend the

Finally some progress.... once I swapped the assignments for MAC address and Pass Code in the User Attributes it started working. So in case s.o. runs into the same problem: * Pass Code => User

I'll throw in one more perspective.? Not all dealers are created equal.? There are dealers that have a really good programming staff and others that may otherwise be really good at A/V but don't do

This is from a Commercial guy with Residential coworkers (including helping with development of an extension…which is just plain painful) so take it for what it is: There are (at least two) two

Sorry for the slight off tipic... I am still trying to understand the purpose of Crestron Home. From Crestron prospective,? to capture more client base with same hardware but handicapped

If you ever make it to Sun Valley I'll be glad to show you around the mountain. Having been here for over 10 years now I can attest that you can continue to improve but it takes time on the mountain

Lol - I can draw metaphors with the best of ‘em! I love skiing, but I’m not that great, and age is starting to out-strip my ability. ?The result being injury!

Hi Rogelio, Please have a look at the example that is part of the zip file. To make the module work, a few things need to be ensured: - Verbose mode 3 needs to be enabled - Before controlling the

Cool, thanks! Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von Mitch Bigelow Gesendet: Donnerstag, 18. Februar 2021 14:27 An: [email protected] Betreff: Re: [crestron]

I have a TPMC-8X-GA and I am also seeing the Ethernet socket error. I just finished chatting with Crestron and the tech said it's a bug and they are working to fix it.

Thanks Oliver. I guess I have to start reading and follow the path that Crestron has laid out rather than the way I usually learn new things. P.S. - I didn't know you were a skier.? You gave it away

Thanks so much for pointing that out.? It is very weird, the link says the right thing but goes to the wrong place.? This link should work.

Thanks Troy I’ve started going down that road.

Use the module I linked to previously, then the UDP client in Simpl, enter the IP in the config, open it and enter the correct UDP port, connect the string. -- *Jeffrey Franck – CTS, DMC-E-4K,

i think the link is going to the previous article on shelly?

Hi Crestronfreak55, Good Day!!! Thank you very much for the modules you have created. By the way i am newbie in this field, i had CTI-P 101 long time back (2014) since then i haven't touch any

Hi, i?m currently updating the programming for a system that involves an older Kaleidescape V700/M300 combo. Programming is distributed among 3 Crestron control units (2 x CP3 and 1 x MC2E). One of

The reason I (and others) have said that Extension Devices are easier to implement than other CCD device types is kind of a "bad thing" if you're looking to be a CCD purist. It's largely because you

But isn’t there a pile of stuff going on in almost every driver? Of course the next one will go much,much faster. I’m just concerned about the learning cliff. Thanks wrote: