开云体育

I can't answer your question, but I find it more than a little ironic that Crestron's door lock example would have so many features, when door locks in Crestron Home have only the bare minimum

I've had a request to port the Weatherflow Tempest weather station driver I wrote to Crestron Home.? How bad can it be.? So, I downloaded the driver SDK from crestron.com/developer and got it

That was how I originally programmed it but whenever the amp powered on we had an obnoxious noise and the client couldn’t stand it so leaving it in a ready powered on mode was the only way I could

Hi. What module do you use to make it work in UDP and how did you configure the camera? I can't do it. Thank you in advance. Manu.

for a work around either turn the output on and off at program start or turn the Sonance dsp on/off with 12v trigger or IP commands

I just tied my room off signal to input 2 on the Sonance DSP card which is empty. It simulates the room off condition. Did you report your situation to True Blue? They kept insisting what a mature

The Crestron Home part of the system isn't very large. The main program on the PRO3 is based off the Adapt model, and I know that you're familiar with their framework. Even the guys at Pantech hadn't

Is it an option to not use input 1 for now and move it to a free input? Sent: Wednesday, February 17, 2021 7:34 AM To: [email protected] Subject: Re: [crestron] SWAMP - weird bug? Yes! I have this

Brian, Thanks for the clarification. IMO if a system with 10+ UIs/4 Pyng SO's each and a group of Trig/listen modules can't hold up, it is barely a toy... BUT to clarify, are you saying that you are

I should have clarified. I did get IP working - it took me a few hours but the control was unreliable. As such, I did not use it for production and reverted to RS232.

My latest article,?"Applying the Lessons of Business Continuity Planning to Smart Home Security”?is being published by the good folks at Residential Tech Today Magazine on their web site. I’d

Yes! I have this problem and it's pretty annoying. What's your workaround, turning on output 9 and then turning it off when the system initializes?

Hi Everyone I have to control a poly G7500 but there is no module for this product Does anyone has got a crestron module pour this product ? Thanks

You have to use websockets. -- Crestron Service Provider - TBD Enterprises Inc.

Hi everyone - I have a project that had a SWAMP connected to a Sonance DSP on SDPIF output 9. The DSP amp never powers off it's always in standby, so whenever the output gets set to zero in

Ken,? I can validate this works.? Looking through the changes, it appears this was not an easy debug? ?I'm sure this took some time to chase down.? ?Thank you.? ?-joe

Sorry, no Facebook social media in my future. We are having some great success with the CP4-R as well.? It's quite a powerful processor. This isn't meant to rant against Crestron Home.? It's very

Why don’t you ask your questions in the Facebook Crestron Home group? Many of us having great success with the CP4-R. Gary's Phone

It might be best. We've got a CP4-R at the office, so I might put it through its paces regarding simultaneous connections. At least its not on a client's dime. It still worked great for our project

Yikes! Thanks Brian for your insights.? I have a large project coming up where I was planning on using Crestron Home with a bunch of CRPC connections. Guess it is back to the drawing board.? Maybe I