¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: CP3/CP3N Requires Reboot

 

Those Data aborts must be whats causing your issue. Run SPLUSTASKS and look for a Thread ID that matches one in your Exception Data Abort errors- in your case Thread-Id=09e60146. You will need to run it before the program resets as the Thread ID will change when the program restarts. When you find a Thread ID from the exception that matches one in SPLUSTASKS it will show you a module location in your program- that is the module causing the data aborts and probably your issues.?
Re: CP3/CP3N Requires Reboot

 

Have you updated the firmware recently? I have found that the newer firmwares take longer to boot so if you have a lot of things tied to "1" or a modest delay after boot you may want to set a boot/initalize connections after 30 or 60 seconds. Probably a good place to start
Re: Sonos AMP Discrete ARC Access

 

Thanks, I will try them tomorrow and let you know.
Re: Sonos AMP Discrete ARC Access

 

¿ªÔÆÌåÓý

Try these, if not I will try to post my IR driver tomorrow. ?For some reason Sonos took the page on their website down that had the codes. ?The ARC input is the TV input. Codes are same for AMP.
Re: Sonos AMP Discrete ARC Access

 

Your solution sounds perfect however I haven't been able to find the IR commands. Sonos factory support doesn't even acknowledge that these exist. Would you mind sharing the IR driver, it would be greatly appreciated!
Re: VT - PRO e

 

i fixed it by downloading and updating all my programs from crestron's website. After i did that VT-Pro-e rebuild my touch panels. an the opened correctly.
Re: CP3/CP3N Requires Reboot

 

Here is errors logged.


?
Persistent log contents during current boot:
+HwDogDriverInit
Info: nk.exe # 2021-01-12 13:01:24? # HwDogDriverInit: device id = 0xf0
Notice: nk.exe # 2021-01-12 13:01:24? # User Reboot
Notice: nk.exe # 2021-01-12 13:01:24? # System startup: CP3 [v1.503.0070 (Oct 09 2018) #00EBE11A]
setIP: Registry static IP setting = 10.64.1.12
Info: nk.exe # 2021-01-12 13:01:24? # Domain Name changed. Updating DHCP options.
Info: nk.exe # 2021-01-12 13:01:24? # Domain Name changed. Updating DHCP options.
Info: nk.exe # 2021-01-12 13:01:24? #? UpdateDHCPOptions:HostName option selected?
Info: nk.exe # 2021-01-12 13:01:24? #? UpdateDHCPOptions:HostName option selected?
Info: nk.exe # 2021-01-12 13:01:24? # Updating DHCP options on boot
UsbHost : New Hub [address(1) / layer(0)]
Ethernet auto-negotiated 100Mbps, Full Duplex
Info: nk.exe # 2021-01-12 13:01:27? # CExternalHub::WaitForPortStatusChange: port 5 change
Info: nk.exe # 2021-01-12 13:01:27? #?
HubStatusChangeThread: Port 5 Connection Changed, device already exist: 0
Info: nk.exe # 2021-01-12 13:01:28? #?
Port 5 Attached
Info: nk.exe # 2021-01-12 13:01:28? #?
CHub: Dev attached
Info: nk.exe # 2021-01-12 13:01:28? # UsbHost : New Function [address(4) / layer(1)]
Explorer(V2.0) taskbar thread started.
FTPD: Running custom Crestron FTP server v0.0.0.1
Info: CrestronMonitor.exe # 2021-01-12 13:01:31? # Crestron applications already installed
ProcessPostInstall: No \windows\postinstall.bat file
ProcessPostInstall: No \windows\shipwithinstall.bat file
Info: nk.exe # 2021-01-12 13:01:34? # SDMemWriteCounterUpdate: InitialCounter is:25908424, MaxHourCounter is:85538
Info: ConsoleServiceCE.exe # 2021-01-12 13:01:40? #? CTP/SCTP and TELNET console disabled.?
?
Info: TLDM.exe # 2021-01-12 13:01:47? #? THAL loading now? ..?
Info: TLDM.exe # 2021-01-12 13:01:47? #? TLDM Starting..?
?Info: TLDM.exe # 2021-01-12 13:01:47? #? LoadHardwareMapOnStartUp - Running on a CP3?
Info: TLDM.exe # 2021-01-12 13:01:47? #? HostName read in is CP3-HARESH?
Info: CIPCommandProcessor.exe # 2021-01-12 13:01:49? #? Product Name is CP3?
?
Notice: ConsoleServiceCE.exe # 2021-01-12 13:01:49? # USB Connection has been made.
Info: CIPCommandProcessor.exe # 2021-01-12 13:01:49? #? Launching TCP server now?
Info: CIPCommandProcessor.exe # 2021-01-12 13:01:50? #? TLDMInterfaceReadInMessageQueueSize - Queue size defaults to 500?
Info: CloudClient.exe # 2021-01-12 13:01:51? #? Model is PLATFORM_WIN_CE?
?
Info: CloudClient.exe # 2021-01-12 13:01:51? # CloudUrl: https://api.my.crestron.com/api/Registration
Info: CrestronTimerEventEngine.exe # 2021-01-12 13:01:52? # CrestronTimerEventEngine: Application initialized?
Ok: AutoUpdateInterface.exe # 2021-01-12 13:01:53? # AutoUpdate Interface Starting
Warning: CPHProcessor.exe # 2021-01-12 13:01:55? # CresstoreService::SetCresstore cs pointer is null
Info: AutoUpdateInterface.exe # 2021-01-12 13:01:57? # SynchronizeScheduledEvents(): scheduling timer for Cloud Diagnostics autodiscovery, _CloudAutodiscoveryTimeInterval=
Notice: HydrogenManager.exe # 2021-01-12 13:01:58? # [..\..\source\Main.cpp:13] HydrogenManager Started
?
Ok: SimplSharpPro.exe # 2021-01-12 13:02:09? # SimplSharpPro Version: 2.07.115
Info: SimplSharpPro.exe # 2021-01-12 13:02:12? # Successfully registered the application with the TLDM?
Notice: SimplSharpPro.exe # 2021-01-12 13:02:14? # Starting Programs...!
Notice: SimplSharpPro.exe # 2021-01-12 13:02:15? # Flash Policy Server - Starting Server.
Notice: SimplSharpPro.exe # 2021-01-12 13:02:15? # Flash Policy Server - Server Started.
Info: LogicEngine.exe [App 1] # 2021-01-12 13:02:20? # Loading program from \SIMPL\app01
Info: LogicEngine.exe [App 1] # 2021-01-12 13:02:20? # Loading Program \SIMPL\app01\Program.bin.
Notice: LogicEngine.exe # 2021-01-12 13:02:58? # **Program 1 Started**
Info: LogicEngine.exe [App 1] # 2021-01-12 13:02:59? #? Going to steady state now?
Info: LogicEngine.exe [App 2] # 2021-01-12 13:03:04? # Loading program from \SIMPL\app02
Info: LogicEngine.exe [App 2] # 2021-01-12 13:03:04? # Loading Program \SIMPL\app02\Harish.bin.
Exception 'Data Abort' (0x4): Thread-Id=096300d6(pth=c0a3bad8), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=030bfb28, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=08a9012e(pth=c0ad4000), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=03d2fb3c, BVA=00000000
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:07? # Sonos - Multicast discovery started.
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:07? # Sonos - The system state changed to "Connecting to Primary Device".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:07? # CRPCConnectionHelper - Created CIP Transport for ipaddress: 10.64.1.94, port: 41798, adapterID: 0
Error: LogicEngine.exe [App 2] # 2021-01-12 13:03:17? # Exclusive device Slot-10 Port 1 is already in use by Program 01
Notice: LogicEngine.exe # 2021-01-12 13:03:21? # **Program 2 Started**
Error: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:22? # Module S-2.3.3.3 : Updated_Channel_preset at line 80: USER SPECIFIED: ^^^^ File Not Found: CablePresets.dat?
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:29? # Module S-9.3.1 : AV_Preset_25 at line 481: USER SPECIFIED: Started Reading: \NVRAM\PresetsData.txt?
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:29? # Module S-9.3.1 : AV_Preset_25 at line 359: USER SPECIFIED: Started Reading: \NVRAM\Presets\Preset00000005.txt?
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:29? # Module S-9.3.1 : AV_Preset_25 at line 449: USER SPECIFIED: Completed Reading: \NVRAM\Presets\Preset00000005.txt?
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:29? # Module S-9.3.1 : AV_Preset_25 at line 359: USER SPECIFIED: Started Reading: \NVRAM\Presets\Preset0000000B.txt?
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:29? # Module S-9.3.1 : AV_Preset_25 at line 449: USER SPECIFIED: Completed Reading: \NVRAM\Presets\Preset0000000B.txt?
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:29? # Module S-9.3.1 : AV_Preset_25 at line 359: USER SPECIFIED: Started Reading: \NVRAM\Presets\Preset0000000D.txt?
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:29? # Module S-9.3.1 : AV_Preset_25 at line 449: USER SPECIFIED: Completed Reading: \NVRAM\Presets\Preset0000000D.txt?
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:34? # Module S-9.3.1 : AV_Preset_25 at line 575: USER SPECIFIED: Completed Reading: \NVRAM\PresetsData.txt?
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:37? # Sonos - Discovery state changed to idle.
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:37? # Sonos - Multicast discovery result: devices found.
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:37? # Sonos - Discovery result: devices found.
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:39? # Sonos - The primary device is changed to Utility Room.
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:39? # Sonos - The primary device(Utility Room) favorites event subscription state changed to "Not Registered".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:39? # Sonos - The primary device(Utility Room) group configuration event subscription state changed to "Not Registered".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:39? # Sonos - The system state changed to "Connected to Primary Device".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:39? # Sonos - The primary device(Utility Room) state is changed to "connecting".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:40? # Sonos - The primary device(Utility Room) state is changed to "connected".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:40? # Sonos - The system state changed to "Subscribing for Group Configuration Event".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:40? # Sonos - The primary Sonos household was changed to Sonos_vRXTR3eHUZwc9zBVNA0Td2o4Dr.
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:40? # Sonos - The system state changed to "Subscribed for Group Configuration Event".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:40? # Sonos - The system state changed to "Subscribed for favorites Event".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:40? # Sonos - The primary device(Utility Room) favorites event subscription state changed to "Registered".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:40? # Sonos - The system state changed to "Subscribed for Group Configuration Event".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:40? # Sonos - The system state changed to "Subscribed for Group Configuration Event".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:40? # Sonos - The primary device(Utility Room) group configuration event subscription state changed to "Registered".
Notice: splusmanagerapp.exe [App 1] # 2021-01-12 13:03:40? # Sonos - The system state changed to "System Ready".
Warning: LogicEngine.exe [App 2] # 2021-01-12 13:03:51? # StartupState - Sysdog did not wake us up for 30 seconds [258]
Info: LogicEngine.exe [App 2] # 2021-01-12 13:03:51? #? Going to steady state now?
Night Minutes prior to rounding is 9.753510
?
Info: TLDM.exe # 2021-01-12 13:03:51? #? Event rcvd is 8?
Info: CRESLOG.exe # 2021-01-12 13:03:53? # PersistentLog: Logging is started!
Notice: HydrogenManager.exe # 2021-01-12 13:03:53? # [..\..\source\Wince\HydrogenUtils.cpp:460] HydrogenManager: Received SYS_EVENT_ALL_APPS_STARTED
?
Notice: HydrogenManager.exe # 2021-01-12 13:03:53? # [..\..\source\HydrgnStMachePro.cpp:1673] HydrogenUrl: https://fc.crestron.io/api/Device/Create
?
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Exception 'Data Abort' (0x4): Thread-Id=09e60146(pth=c0ae0668), Proc-Id=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe', VM-active=09fa005a(pprc=c095fd40) 'splusmanagerapp.exe'
PC=003624d0(???+0x003624d0) RA=0045bd6c(???+0x0045bd6c) SP=0401fb3c, BVA=00000000
Re: VT - PRO e

 

I have exactly the same error today, but the weird thing is in the morning it was working well, and a couple of hours ago starts failing showing the same error message.


The thing here is, Do I have to update something else, the CP3, the TSW-760?
Re: CP3/CP3N Requires Reboot

 

Can you post a capture of what errors are being logged?


On Thursday, January 14, 2021, 02:59:39 PM CST, Sharan Suvarna via groups.io <suvarnasharan@...> wrote:


Hi

Even I am facing the similar problem in CP3. Could you please let me know is there any way to rectify this issue ?
I tried restoring the device and then loaded the program, still no change. The CP3 lags it self after 2-3 days a reboot will make it fine, but in the system errlog there will be 10000+ errors. I have no idea what's it trying to say.

It would be really great if you could help me pout here.

Re: CP3/CP3N Requires Reboot

 

Hi

Even I am facing the similar problem in CP3. Could you please let me know is there any way to rectify this issue ?
I tried restoring the device and then loaded the program, still no change. The CP3 lags it self after 2-3 days a reboot will make it fine, but in the system errlog there will be 10000+ errors. I have no idea what's it trying to say.

It would be really great if you could help me pout here.
Re: Death of Xpanel 2.0 (Web) Smart Graphic #crestron #xpanel

 

Thanks for the info.? ?I'll give that a try tomorrow.


On Thu, Jan 14, 2021 at 08:20 AM, Thorsten K?hler wrote:

Yes, same here.

?

Cheers, Thorsten

?

Von: [email protected] <[email protected]> Im Auftrag von ScubaSteve
Gesendet: Donnerstag, 14. Januar 2021 08:13
An: [email protected]
Betreff: Re: [crestron] Death of Xpanel 2.0 (Web) Smart Graphic #crestron #xpanel

?

Having converted a number of web xpanels to smartgraphics xpanels they work fine. ? One thing we are currently seeing is the bottom being cut off on the panels when they are run on ultrawide monitors 21:9 aspect. ? On a normal ?16:9 ratio monitors they are displayed fine. ? We've raised this as a case and would be interested if anyone else has found any thing similar.

would prefer a fix rather than moving up a load of buttons on the panel layouts.?
Re: VT - PRO e

 

Because of Flash end of life.


Check this Crestron link.
Re: Death of Xpanel 2.0 (Web) Smart Graphic #crestron #xpanel

 

I'm running into an issue where the xpanel conversion tool does not convert the ipid, has to be done manually in the host settings on the xpanel when you log onto the processor. Wondering if anyone else has this issue, I have a ticket into true blue.

Re: Curl formatting

 

I tried sending the BODY part of the message - below (I formatted it with \n for line breaks) in the serial send symbol


{

? ? "device": "AA:AA:AA:AA:AA:AA:AA:AA",

? ? "model": "H6141",

? ? "cmd":{"name":"turn", "value": "on"}

? ? }
Re: Curl formatting

 

¿ªÔÆÌåÓý

What string are you sending in for the PUT?

?

Caleb Radecky | Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC | Crestron Services Provider | 8228 Mayfield Rd. #6B Rear Cleveland OH 44026
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 |

?

From: [email protected] <[email protected]> On Behalf Of itaibengal@...
Sent: Thursday, January 14, 2021 09:08
To: [email protected]
Subject: Re: [crestron] Curl formatting

?

So I made some progress on my front using the module above.?
1. I was successful with a GET command to see status - yay!
2. I was unable to send a PUT command and get an error.?

I am curious if anyone has an idea how to send the BODY part of a HTTPS message using the module, I think that's where the issue lies.

Re: Curl formatting

 

So I made some progress on my front using the module above.?
1. I was successful with a GET command to see status - yay!
2. I was unable to send a PUT command and get an error.?

I am curious if anyone has an idea how to send the BODY part of a HTTPS message using the module, I think that's where the issue lies.
Re: Death of Xpanel 2.0 (Web) Smart Graphic #crestron #xpanel

 

¿ªÔÆÌåÓý

Hm, i?m running Adobe Air v32.0.0.89 which should work according to the KB article. But it?s not.

?

Cheers, Thorsten

?

Von: [email protected] <[email protected]> Im Auftrag von dblpnt
Gesendet: Donnerstag, 14. Januar 2021 12:17
An: [email protected]
Betreff: Re: [crestron] Death of Xpanel 2.0 (Web) Smart Graphic #crestron #xpanel

?

Found it?

Re: Death of Xpanel 2.0 (Web) Smart Graphic #crestron #xpanel

 

Found it?https://support.crestron.com/app/answers/detail/a_id/1000370
Re: Death of Xpanel 2.0 (Web) Smart Graphic #crestron #xpanel

 

Regarding the cutoff XPanels, I think this is/was an issue with the Adobe Air version installed on the machines.
Re: Compile error after SIMPL update

 

This is OT (apologies) but the paranoia about DB200 is unwarranted (IMO).

Yes, it is a pain to have to migrate project modules(*) and if we didn't have to do it life would be a little bit better, but I think NOT making the move is going to be a greater headache in the long run.

For the sake of clarity:
The DB200 breaking change was a dependency update from NetwonSoft 3.5 to NewtonSoft 4.0.? This is often used in S# drivers that require JSON parsing.? If a driver doesn't have the Newtonsoft depenedency, then the move to DB200 is as transparent as any other DB update (yes, I accept that Crestron have broken things in the past, but in general DB updates are pretty solid - I'm also not drinking the Crestron Kool-aid here - believe me, I have plenty of reasons to gripe).

That's it - if your Crestron DB's are NewtonSoft 4 and your module requires 3.5, it won't compile.? If they're the same version, it will - it's no scarier than that.?

The large change in version number does NOT reflect a wholesale change as it might suggest.? I have to admit I may have some responsibility here as I discussed the forthcoming change with Crestron and suggested that a clear distinction in versioning might help identify which side of the NewtonSoft fence you were operating on - the unforeseen side-effect might be that such a big version change /suggests/ a bigger change than the reality.

There is no direct dependency on firmware here either, so you can certainly run a program compiled against one version in one slot and a different one in another slot, just as it shouldn't be a surprise that you can run SIMPL in one, SSPro in another, D3Pro in another and Studio in another.

Sorry to get a bit preachy, but I do think with a little bit of preparation moving projects to DB200 isn't as big a deal as some appear to feel it is.
Sermon over!
Ol

* That's making the assumption that updated modules have been provided by the developer - but any module developer should have done this by now (we had made ours available /before/ the DB200 release)
17341 - 17360 of 256420