Why are you sending it with any line breaks in a serial send? That's more for human readability, but in a send symbol it all appears on one line with your escape codes anyways meaning there is no added benefit in doing so... Minimize that JSON into a single line with no line-breaks or spaces.

{"device":"AA:AA:AA:AA:AA:AA:AA:AA","model":"H6141","cmd":{"name":"turn","value":"on"}}

--

HI;

I am being asked to specify SIP intercom for a large-ish installation:

?

6 – TS-1542

15 – TS-1070

And replacing a Panasonic telephone system that has 30-ish extensions as well as a car-gate and man-gate.??Apparently they never actually use phone system for outgoing calls but only for intercom purposes.??Limited initiation of point to point calls, mostly an all-page kind of thing.

?

Client seemed OK with using 770 or 1070 for replacement of Panasonic phones. ?A bit expensive, but I they also get the ability to see their 90-ish cameras, run HVAC, etc. so there is a bit of extra value there I guess.

?

I have looked at demo program and understand phone book, etc.??but I would like to know if there is any additional hardware I will need to specify to support the number of endpoints.

?

Also, I am wondering about the gate stations.??Drive up has an old skool DoorKing calling the Panasonic.???Is there any way to recognize an incoming SIP call from the gate, either via an appliance like Barix,?replacement?call box that has SIP, or whatever (i.e. not a touch panel) to trigger control system events? ?Can I get something at the gate to initiate all-call to 50 endpoints?

TIA Kol

?

?

开云体育

Is this system on XIO cloud? ?If not disable that feature ? I had a similar issue with a pro3 and that fixed it. All the Hydrogen Errors are from the XIO cloud

That did the job perfectly. If you're ever in Las Vegas I owe you dinner, thanks!!

I thought that I had found a few network settings, etc. to help with Sonos stability, but as usual I'm wrong again.
This crap continues to torture me and my clients with unreliability, where even after a reboot, Sonos communications seems to go down with 4-6 hours.
I'm using the latest SW+DBs (as of ~ a week ago), and the latest Processor FW. It seems worse now than before...

I'm only interested in what others are seeing in their systems, as I want to make a case to Crestron regarding this - Unless of course, I am the problem!!?
Except that my Sonos code has not changed at all in 2-3 years since the 3.1.0 modules came out, and things worked pretty good until ~ 6 months ago and now even more so in the last 1-2 months...obviously something has changed beyond my control...

Looking forward to any responses...

Sharan, I’d say stopping program slot 2 from running would be a good place to start before moving onto more complicated things that way you can at least isolate it a little more. ?If stopping program two didn’t work, I would delete the files in that slot leaving only program one and reboot. Lots of ways to troubleshoot this but good to start from step one

Also just as a heads up to everyone: after the conversion with the XCT, when a user calls up the web interface of a processor it requires the requesting machine to have internet access to download the software tool directly from Crestron.com (not always a given) and it requires administrator rights to install the software tool (also not always a given).? This becomes a problem in more secure deployments where users may not have software install rights.?

There are obviously solutions, but it requires more time, communication and people involved to get back to operational in some environments.

Those Data aborts must be whats causing your issue. Run SPLUSTASKS and look for a Thread ID that matches one in your Exception Data Abort errors- in your case Thread-Id=09e60146. You will need to run it before the program resets as the Thread ID will change when the program restarts. When you find a Thread ID from the exception that matches one in SPLUSTASKS it will show you a module location in your program- that is the module causing the data aborts and probably your issues.?

Have you updated the firmware recently? I have found that the newer firmwares take longer to boot so if you have a lot of things tied to "1" or a modest delay after boot you may want to set a boot/initalize connections after 30 or 60 seconds. Probably a good place to start

Thanks, I will try them tomorrow and let you know.

开云体育

Try these, if not I will try to post my IR driver tomorrow. ?For some reason Sonos took the page on their website down that had the codes. ?The ARC input is the TV input. Codes are same for AMP.

Your solution sounds perfect however I haven't been able to find the IR commands. Sonos factory support doesn't even acknowledge that these exist. Would you mind sharing the IR driver, it would be greatly appreciated!

Here is errors logged.

I have exactly the same error today, but the weird thing is in the morning it was working well, and a couple of hours ago starts failing showing the same error message.


The thing here is, Do I have to update something else, the CP3, the TSW-760?

Hi

Even I am facing the similar problem in CP3. Could you please let me know is there any way to rectify this issue ?
I tried restoring the device and then loaded the program, still no change. The CP3 lags it self after 2-3 days a reboot will make it fine, but in the system errlog there will be 10000+ errors. I have no idea what's it trying to say.

It would be really great if you could help me pout here.

Thanks for the info.? ?I'll give that a try tomorrow.

Because of Flash end of life.


Check this Crestron link.