开云体育

What model OLED is it?

I have the same thing, just updated VT-ProE and now when I click the ‘Run’ it processes the file but doesn’t run the XPanel emulator. I did find that pressing ‘Run’ once or twice more will

What model OLED is it?

This is acutally immediate when it shuts off. ?We are on the latest firmware with these. ?We also just did a test and the LAN port does the same thing.

not OLED but had this issue on some 75ul3e's. would work fine turning on/off when testing, then when left off overnight they would fail to turn back on. ended up being the firmware, which for some

Just started a job with some LG OLED consumer grade displays on a commercial project. ?It looks like the 232 port on the display shuts off when you turn the display off (thanks LG). ?We've shut off

Thanks for the response. So it might be that i tested with a device that doesn?t need the full 12V. But I understand my general approach using ground and a pin of the Versiport, pu-disable for that

My latest article, "How to Integrate the Garage into a Smart Home” is being published by the good folks at Residential Tech Today Magazine on their web site. For Crestron programmers there is a free

i'm baffled then, i have no idea why it would work for you? the problem appears to be getting the TV to pop up the box to approve IP access i wonder if you had this working before the library changes

Hi, is it possible to trigger a device with a 12V trigger input from a CP4 without using an external 12V source in conjunction with one of the built-in relays? I?m sure that i tried this successfully

Have you tried running the XPanel installer? https://www.crestron.com/Software-Firmware/Software/XPanel-Desktop-Setup/1-0-7

So I've run into this problem before, upgrade VTProE and the green 'Run Project As' emulator does nothing. The fix was always to install a previous version of VTProE. Just got a brand-new laptop for

PMC3 (not -XP) tend to show up on Fleabay at relatively reasonable prices with reasonable frequency. Or for that matter you could “upgrade” to the MC3 as well. I have a PMC3 sitting in our DC

Looks like this is the end of the road. The partition table on the card is toast. I don't have another PMC3 to copy from. Bummer. Thanks for everyone's suggestions.

A while back, I posted my RS232 module that I built for my RS-4810.? It will power on the projector and wait till it is ready before sending the input with just an input call.? Not sure if the model

This is the command format: FPUTfile [url] [local_path] {username:password} {proxy} url - fully qualified URL to the file being uploaded to the server local_path - path to the source file in the ROM

This is a JVC_DLA-RS1 in the file section that I have used with the DLA-NX7.? My thanks to whoever posted it - it works great.

Hi Sharan, were you able to figure this out. I'm currently struggling to get FPUT and FGET to work between a PRO3 and TSW. Both are secure Thanks

Yes, I'm using the latest DB's. Device Database: 200.20.002.00 Crestron Database (cnctrldb22000.mdb) :? 202.00.001.00 Crestron Toolbox: 3.07.228.02 SIMPL+ Cross Compiler: 1.3 Thanks for noting the

Hi Guys, Would you introduce a Doorbell with Camera match with Crestron control system and 1060 TP? Best,Omid