开云体育

I believed I seen this back years ago in one of my programs.? It turned out to be signal in a module that was named "LOCAL" -- it wasn't even a module that I wrote.? If you do have a signal named

Most common cause is not recompiling the SIMPL program properly. *FW v1.603.0113 requires SIMPL program running must be compiled with DevDB 91 [Jul.2020] or later.* *Also make sure you use Recompile

Hi, any luck with this?

Hi all, Just wanted to ask if some of you have been able to integrate Napco Ibridge and Crestron? I can change the parameter of the Napco ibridge but still with no prevail. thanks in advance.

Hi, Has anyone been able to make the Honeywell 4232BCM version 1.4 module work with the Vista 20p alarm panel and a CP3? I cannot get any communication back from the device (alarm panel) on version

Local is a virtual signal that the compiler reserves (along with 0 and 1), although I don't know how it's used. I would try Project/Resync Project, or go back to an older version of your SMW,

I've actually run into 2 projects where the processor had a current license and had been operating fine.? Upon updating firmware, for whatever reason, the lighting stopped working and reverted back

that's an interesting service. It's good if I can't find any other solution.

Well I was remoting into a site yesterday that Sonos was broken and tried the new firmware and guess what? Still doesnt work. Rebooted Sonos units, rebooted CP3 several times. No favorites had been

Firmware blocking the telnet port is not the problem. You need a Lutron 3rd party lighting license from Crestron. They are free now just have to submit your processor info to them. If you look in your

If Lutron interface is on the same subnet as the Crestron processor and you’re using a device purchased after the licensing change was announced, a license is required for IP control of Lutron if

we are doing integration with lutron QS System using r04 modules First the integration was working well... but after I updated the Pro3 to the latest firmware the connection with lutron processors

Did you use the signal list function at the bottom of the logic tree in simpl?

Hi guys, I have a strange compiler error... "failure - signal label Local" I have searched the whole program for a signal "Local" but cannot find one.? It is listed in the extended signal list. I

I avoid IP control of Samsungs, specifically for this reason, and because of the many similar complaints from other programmers. FYI,

I totally agree actually, a list would make more sense. Thanks for the suggestion!

Man I feel dumb. How did I miss that module? I actually pulled the command protocol from the site and started building my own…

Hi With which processor do you want to use this module? I use this module but not for the same Samsung reference and it works on the other hand, I had a problem when I wanted to use it with a PMC3 :

So are you saying that HAI is no longer available?? It has been a while since I integrated one in a new project but I too have always like HAI products.? Seems like most security panels come with

What is everyone doing for IP control of Samsung? The Samsung IP driver from the application market isn't being updated to work with the new database. Has everyone switched to certified drivers? I