Re: RoKu IP Control - again!
Little plug... We have this:
It offers direct app launching and automatically pulls in the app images too which you can do some quite nice things with.
--
Intrinsic Dev - Drivers Done Differently
Buy our drivers through?
Need Support??
|
They are devices that respond to ¡°switch on¡± and ¡°switch off¡± instead of ¡°open¡± or ¡°close¡±.?
For blinds/shades first check that they work by issuing a command like ¡°Switch <name of shade> on¡±.?
Then set up a routine in the Alexa app that responds to ¡°Open <name of shade>¡± and ¡°Close <name of shade¡± and performs the switch on/off task?
toggle quoted message
Show quoted text
On 16 Apr 2020, at 09:01, Gavin <gavin.campbell@...> wrote:
?I think part of the problem is depreicated commands havent been removed from the module. So things like Home/Away/Goodnight do not work despite being the most obvious items you pick for a test.
It's ok -? I still think its a bit cumbersome but when you get it working in m experience it stays working.
Does anyone know how to conrol window blinds via Alexa? I cannot get the voice commands to work at all.
|
Re: CrestronApp prob. H264 stream (android)
I've had no real issues with my Grandstream GXV3500 to my TSW-752's but I can't for the life of me get my Lilin streams to work.
-s
|
I think part of the problem is depreicated commands havent been removed from the module. So things like Home/Away/Goodnight do not work despite being the most obvious items you pick for a test.
It's ok -? I still think its a bit cumbersome but when you get it working in m experience it stays working.
Does anyone know how to conrol window blinds via Alexa? I cannot get the voice commands to work at all.
|
Losing URL encoding in S#
I'm trying to execute the following http command in s#
I've encoded the url within the http message as that is required by the system I'm sending the command to. However, after I execute the following
string url =? "" HttpClient client = new HttpClient();
HttpClientRequest request = new HttpClientRequest();
HttpClientResponse response;
request.KeepAlive = false;
request.Url.Parse(url);
When I print the url to the console by executing?
CrestronConsole.Printline(request.Url.ToString());??
I get the following:
The encoding I included in the url string has been removed and the other system rejects the command.??
Any ideas on how I can get S# to leave the encoding in my url string in place, or any other solution to this problem, would be greatly appreciated.
Thanks in advance for the help
Jay?
|
Re: RoKu IP Control - again!
I also use the combination of the Crestron Certified driver and the "Roku 3 Series" from the files section. I just use the files section driver for app selection. Everything else I do with the Crestron driver.
Jay
toggle quoted message
Show quoted text
------ Original Message ------ From: "Tony Golden" <mrgolden@...> To: [email protected]Sent: 4/15/2020 7:39:37 PM Subject: Re: [crestron] RoKu IP Control - again! I use a combination of the CCD, which works surprisingly well for all the basic functions, with one of the "Roku 3 Series" modules from the Group's Files section. The latter is only for the direct channel commands and icons.
--- On Wednesday, April 15, 2020 at 8:31 PM, gablerjohn wrote:
I have been using the Crestron Certified driver. I haven't had any issues with
it. Doesn't have the direct channel call, but I have heard of people using a
mix of the 2 approaches
|
Re: RoKu IP Control - again!
I use a combination of the CCD, which works surprisingly well for all the basic functions, with one of the "Roku 3 Series" modules from the Group's Files section. The latter is only for the direct channel commands and icons.
toggle quoted message
Show quoted text
--- On Wednesday, April 15, 2020 at 8:31 PM, gablerjohn wrote:
I have been using the Crestron Certified driver. I haven't had any issues with
it. Doesn't have the direct channel call, but I have heard of people using a
mix of the 2 approaches
|
That was the ticket. I had to remove the existing license and request a new one. Once that was done everything works like it should. Weird thing is that during my troubleshooting on a different processor, if there was no license present it wouldn¡¯t even pretend to connect. On the licensed processor with poopy license it would in fact connect but not transmit any data. With the new license it connected instantly and worked flawlessly.
|
Re: RoKu IP Control - again!
I have been using the Crestron Certified driver.? I haven't had any issues with it.? Doesn't have the direct channel call, but I have heard of people using a mix of the 2 approaches
|
Re: How is Crestron Fusion different from Xio Cloud?
#crestron
Sharan,
I would suggest you connect with your Sales Rep from Crestron. They can guide you through the feature sets.?
if you¡¯ve never done Fusion before I HIGHLY suggest you go through the training and possibly build your own setup before deploying for a client.?
Thanks!
¡ª°²â±ô±ð
|
Re: RoKu IP Control - again!
I've used that module for years, works with TCL tv's too.? I did need to edit the commands a bit to add TV functions like Input, ch and volume which work well on the TV's.? I use CEC for power though.
|
Re: RoKu IP Control - again!
I agree with TRoberts, add an OSC to the d pad buttons for navigation? Ryan Cunningham?
toggle quoted message
Show quoted text
On Apr 15, 2020, at 2:06 PM, TRoberts via groups.io <tzroberts@...> wrote:
|
Re: RoKu IP Control - again!
|
Hi All,
I'm looking into using IP to control the Roku platform, and for those who like it, here are some questions:
? 1. Which Module(s) in the files section do you recommend? Or is there another one better?
? 2. I would only use the ULTRA or the ULTRA LT (because of the ethernet connection). Any difference in capability/reliability of IP control for these??
? 3. Other than needing DHCP reservations, any other reliability or feature issues with this control??
TIA!!
|
On Wed, Apr 15, 2020 at 12:49 PM, gablerjohn wrote:
Try pinging the lutron processor from Toolbox text console and see if replies.? I have had a couple of systems that the Crestron license shit the bed and broke the coms between the Crestron and Lutron processor.? If it drops all packets, then get a new license.
Agreed! I have a Ra2 site that this has happened to me 2-3 times.? I'm currently chalking it up to the dealer not yet heeding my warning about closing all port forwards...? ?Note: if you have port forwards - delete them....
|
1) 2
2) 2
3) yes
4) Dante Audio Transmit can select between: HDMI?Input (TX or RX Mode),A Audio Input (TX or RX Mode), Secondary Audio Input (RX Mode Only)
5) Dante Audio Receive can be selected as audio source for HDMI Output, HDMI Output is then automatically selected as audio source for Analog Audio Output
|
Try pinging the lutron processor from Toolbox text console and see if replies.? I have had a couple of systems that the Crestron license shit the bed and broke the coms between the Crestron and Lutron processor.? If it drops all packets, then get a new license.
|
Re: How is Crestron Fusion different from Xio Cloud?
#crestron
FUSION - is a customizable monitoring software Onprem/Cloud (think help desk options, energy management, higher education support desk Etc.)
XIO Cloud - is for static monitoring of only provided (embedded types, names, ip address,etc) items are read only.... and only provide minimal configuration types at this time for certain devices, as this is expanding all the time.?
thank you??
-- Joshua B Zimmerman
The beginning of knowledge is the discovery of something we do not understand.
? - Frank Herbert
This message, including any attachments, may include privileged, confidential and/or inside information. Any distribution or use of this communication by anyone other than the intended recipient(s?? The information contained in this e-mail and any attached documents may be privileged, confidential and protected from disclosure. If you are not the intended recipient you may not read, copy, distribute or use this information. If you have received this communication in error, please notify the sender immediately by replying to this message and then delete it from your system.? ? This email may contain confidential and privileged material for the sole use of the intended recipient. Any review or distribution by others is strictly prohibited.? If you are not the intended recipient please contact the sender and delete all copies.
|
How is Crestron Fusion different from Xio Cloud?
#crestron
Hi all,
I am pretty confused with finding out the exact difference between the Crestron fusion and the Xio cloud features, like where exactly I use the Crestron fusion services or the Xio cloud services. Could anyone you guys can through some point regarding the exact usage of the Crestron Fusion and the Xio cloud services.
Basically I have a system with around 30 conference rooms with (DM-NVX, mercury, TSW panels, soundbars, TST-902, AV3, Wireless gateways, etc) I need to find a platform to easily configure them when deploying them and then closely monitor and provide support to the clients if required.
Here for my situation which flatform would be the best solution?
Any suggestions are welcome.
Thank you
?
Regards,
?
Sharan Suvarna
Systems Engineer,
Cell: +91 9019862464
|
Topics in Home Automation - New Article Published in Residential Tech Today Magazine
My latest blog post, "SwitchBot Review: An Easy (and Cheap) Way to Smarten Up Your Home¡± is being published by the good folks at Residential Tech Today Magazine on their web site.? During my recent article series on making appliances smart, I briefly touched on SwitchBots.? After I used them, I thought these great, little problem solvers deserved a more in depth look. You can find the full article here:?
For those interested in earlier articles that I've written, you can find those here:
For those interested in even earlier content I've written, you can find my blog here:
I hope you find the information useful.
|
Intrinsic Dev
Neil Carthy
AVMaster
Ryan Cunningham
