开云体育

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /bosch1000D&DCNM_WAP_v1.2ru_eng.pdf Uploaded by : v.golubenko

It's underneath the daughter board. The daughter board is attached to the motherboard with two plastic screws.

Where is the sd card. I’ve looked previously and couldn’t find it anywhere. Philip PJW Installations

The software image on the 3 series processors also includes the mac addresses, serial number and internal communication bus addresses. If you are swapping in an image from a different unit you will

Do you mind sharing the image you received? I have backed my image up and tried what I thought to be was a clean one, and can't get it to boot with a Sandisk 2GB card.

i'm using the IP module and it keeps losing control in the middle of watching something, it stops responding in the debugger the status from the module is flipping between 1 & 3 sometimes if I wait

I heard rumors that would be exposed via Simpl# in Pyng 2.0 But I wouldn't hold my breath. This is why we won’t use Pyng.

I am using the "listen for Pyng" module. I am trying to get a way to display a feedback for a thermostat, shade on the Simpl side of the program. Does anyone know if its possible ? Thanks

there is a module and example on Crestron's Application Market that works for 2018 models

Yes I did, now I`m waiting for my 2GB Micro SD card to arrive.

I do have the protocol for RS-232 via the mini jack service port. The module is written for URC Total Control but I can post a picture of the commands if you like. You do need a TTL converter for the

Thanks for your help guys. Lincoln - thanks for clearing that up. Seemed to be a number of ways to skin the cat and wasn't sure the approved way! sirgaston99 - just what I was looking for! Thanks!

I know this TV can have IP control because there are some IOS apps that control the TV, but i've only seen IR files for it. Has anyone created a Module for TCP/IP control?

Used to be that way. Not anymore and it is pretty easy to download the wrong one. Adam Zatorski King Systems LLC Sent: January 24, 2019 10:59 AM To: Crestron@... Subject: [Crestron] Re: VT

It's a firmware problem. Rolling back to 1.503.0055 fixed the issue.

https://www.crestron.com/getmedia/b836b5e1-fce6-4fd8-b53a-376d93bdfc7c/mg_avia_dsp_help_guide-echo_cancellation_1

Dear all, Have anybody used DSP 1283 with SHURE MXA910, I need help on AEC control. For your information I had used the Shure MXA 910 9th cahnnel as it is the Auto Mix channel and routed it to DSP1283

I always thought the crestron app on ipad only see it for the ipad and vise versa. I think used to be that way. Thank you I will check on that.

People are still using MobilePro and not the new App??

I had this happen a few months ago, and it was because the client had mistakenly installed the iPhone app on one of the iPads.