开云体育

Anyone have a cover for this?

Cool. Thanks Keith.

I use D3 all the time and always use .rsd to SIMPL.

I have been asked to help add a TSW760 to an existing lighting system that was done in D3 Pro. I've never used D3 before, I like to write my own code in SIMPL. Maybe I'm a bit of a masochist based on

Thanks for your answer. I believe that they are all HDCP 1.x, based on the fact that some sources are old enough to be pre 2.x Like I said; this has occurred in up to a quarter of our classrooms. Had

Thanks for the clarification on the revision history and the CCI/Harman relationship, Jeff. It's good to know that I'm running the most recent version of the modules, which was my man concern. I would

It sounds like the BSS is losing subscriptions, not sure if this is an isolated case or firmware issue. All status changes happen with subscriptions (unsolicited response). In order to be sure, would

Hi, Have a similar problem with a DM8x8. During the last weeks It reboots randomly 1-3 times everys day/night. The installation had been running fine since 2014... It is now upgraded with latest fw

Hi, i?m currently experimenting with the built-in voice recognition of a TSR-302 remote. In general, i got it working, but it works not reliable. After a reboot of the remote, everything works fine.

What's in the error log? Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K ControlWorks Consulting, LLC | Crestron Services Provider | 701

Yup

Are the sources HDCP 1.x or HDCP 2.x? If they’re 2.x the DGE-100 doesn’t support 2.x – only 1.4 so you’d need to configure the inputs on the DM switcher to only advertise support for HDCP 1,

I have posted about this before. The DGE-100 is supposed to be able to render any HDMI signal within its scaling abilities and is supposedly HDCP compliant. We are deploying about 18 of them connected

did you do a full recompile alt-f12?

Is this something ccijeff could help with? I know these modules were authored by CCI,and they have been great in the past with assistance with their modules. In that regard, Jeff, if you can provide

No experience with that PDU but it sounds like it may require the capabilities negotiation that’s part of the Telnet protocol before it exchanges data. (Many/most devices don’t require the

Try using ‘teladmin’ for the user account for telnet and the default password (which is ‘password’ if memory serves. Best regards, Neil

Hi All, I am having an issue where I can't log in to an Aten ATE-PE6216G PDU from a Crestron system. I have checked the log in details and even copied the login from the Crestron program to the Aten

Hello, We are using the "Crestron Soundweb London module v1.1" Simpl# modules off the BSS web site. (interestingly, all files in that ZIP say "v1.0", most recent 3-28-18) The issue we are having is

I tried changing out Sonos v3.0 for 3.1 and it made my program in my pro3 reboot over and over. Put 3.0 back and everything is fine. Seems this version 3.2 has a simpl+ problem