Re: Custom Logo Graphic on Built-in DMPS Airmedia

#228145

I am in Crestron NVX Training and asked this of the instructor. He said yes you need to do it thru SIMPL. It is under the Airmedia Slot and then under the OSD control. Bottom line of the module is where would put the URL.

[image1.jpeg]
Josh Bloom
(H) 727-585-4115
(C) 727-692-7505
(W) 727-394-6157

Show quoted text

On Jul 20, 2018, at 12:14 PM, 'Leas, Brian P' brianleas@...<mailto:brianleas@...> [Crestron] <Crestron@...<mailto:Crestron@...>> wrote:

I am trying to see if there is a way to change the logo graphic (not the background) on the new built-in DMPS AirMedia.  I was able to do it on the Mercury, but I don’t even see it as an option in the DMPS web interface.

-Brian

Re: Custom Logo Graphic on Built-in DMPS Airmedia

#228144

开云体育

Hi Brian,

?I don’t think you can host it locally. In simpl there is (I think) a serial join for a URL to host it on a web server.?

Show quoted text

On Jul 20, 2018, at 11:01 AM, 'Leas, Brian P' brianleas@... [Crestron] <Crestron@...> wrote:

?

I am trying to see if there is a way to change the logo graphic (not the background) on the new built-in DMPS AirMedia.? I was able to do it on the Mercury, but I don’t even see it as an option in the DMPS web interface.

?

-Brian

Custom Logo Graphic on Built-in DMPS Airmedia

#228143

开云体育

I am trying to see if there is a way to change the logo graphic (not the background) on the new built-in DMPS AirMedia.? I was able to do it on the Mercury, but I don’t even see it as an option in the DMPS web interface.

?

-Brian

Re: Free Fusion

#228142

Send it to Crestron and let them verify it...

Show quoted text

On Fri, Jul 20, 2018 at 8:50 AM, steve@... [Crestron] <Crestron@...> wrote:

?

Correct, Jeremy, but there was no way to verify that the implementation worked with Fusion Cloud if you have no account to run it on.? This probably isn't an issue for commercial programmers who have used Fusion in the past but, for resi programmers like me, it made it pretty much impossible for me to know if what I did was going to work properly.

Re: Free Fusion

#228141

Correct, Jeremy, but there was no way to verify that the implementation worked with Fusion Cloud if you have no account to run it on.? This probably isn't an issue for commercial programmers who have used Fusion in the past but, for resi programmers like me, it made it pretty much impossible for me to know if what I did was going to work properly.

Re: Free Fusion

#228140

Assuming you took the same exam as I did, implementing the SIMPL side of Fusion did not require any testing against an actual server.

Show quoted text

On Thu, Jul 19, 2018 at 7:58 PM, jahonix@... [Crestron] <Crestron@...> wrote:

?

"Part of my gold exam was to program a Fusion system, and they wouldn't let me setup a free demo account to do my exam, so probably not."
You must be kidding!
That's like the BS numerous security companies practice where employees have to buy the company branded clothes?for ridiculous prices before getting on the first job.

How about Fusion seminars? Do they still hand-out VMs with a pre-installed Fusion server on an unlicensed Win2k12 server, good to go for 90 days or so?
?

QSC Q-SYS String Value Module - Polling?

#228139

This is a crosspost from the Reddit...?

The Q-SYS modules are all pretty straightforward, but I can't figure out how to poll or get the String Value Module to report feedback without sending an initial value, for instance when the Core connects. I've tried pulsing and holding the [Poll Enable] join high. I am only sending analog values for a source router named control.

If I send the module a value, the feedback then reports... but I'd like that to just refresh on program start.

Thanks!

Re: Samsung USB to EXLink adapters

#228138

开云体育

It seems like this IMS is more likely to be the correct one... but no smoking gun.

?

Show quoted text

From: Crestron@... on behalf of Eric Walters sentry07@... [Crestron]
Sent: Thursday, July 19, 2018 5:55 PM
To: Crestron
Subject: [Crestron] Samsung USB to EXLink adapters

?

Welp, I saw my first one in the wild.

They work just fine after going into the secret menu and enabling the options for it. Still not sure what the hell they are. It says UART to 232. And the company on the back comes up as an electronics recycling company.

Re: Free Fusion

#228137

"Part of my gold exam was to program a Fusion system, and they wouldn't let me setup a free demo account to do my exam, so probably not."

You must be kidding!

That's like the BS numerous security companies practice where employees have to buy the company branded clothes?for ridiculous prices before getting on the first job.

How about Fusion seminars? Do they still hand-out VMs with a pre-installed Fusion server on an unlicensed Win2k12 server, good to go for 90 days or so?

?

Re: Comcast Xg1 infinity ( Shaw Blu Sky)Control

#228136

开云体育

Just Checked the CXI Central site and there is still nothing.? They were supposedly working on it for the last year or so.

?

Show quoted text

From: Crestron@...
Sent: Thursday, July 19, 2018 12:22 PM
To: Crestron@...
Subject: [Crestron] Comcast Xg1 infinity ( Shaw Blu Sky)Control

?

Greetings group. Has anyone discovered an option for control on these ? I believe the Shaw blu sky in Canada is the same product. Thanks

Samsung USB to EXLink adapters

#228135

Welp, I saw my first one in the wild.

They work just fine after going into the secret menu and enabling the options for it. Still not sure what the hell they are. It says UART to 232. And the company on the back comes up as an electronics recycling company.

Re: Free Fusion

#228134

This is what the release notes say:

New Features

Starting with 11.1.5000, a new install of Crestron Fusion no longer supports any connection without a license. The software requires a license to make any room connection.

So if you can get FSG to get you a version prior to 11.1.5 you should(?) be okay

Re: Max Number of SSH Modules ??

#228133

I attempted to reach out to coolaiddrinker directly, but haven't heard back. Does anybody have any more information about or access to this supposed v1.5 of the SSH module that improves CPU load?

I recently came across this very same issue and the latest version publicly available in the DB appears to be v1.3. I'm not trying to do the crazy 10-20 per processor, but really would like to be able to get more than the 5-6 I'm barely managing right now and any performance gains would be welcome.

Thanks!

-Stuart

Comcast Xg1 infinity ( Shaw Blu Sky)Control

[email protected]

#228132

Greetings group. Has anyone discovered an option for control on these ? I believe the Shaw blu sky in Canada is the same product. Thanks

Re: Biamp Tesira 3.0 modules connecting but no control or FB

#228131

Glad you had a good experience. We strive to keep our team aware and trained enough to support most common module questions. Beyond that, several of the Applications Engineers are able to dive deeper into debugging as needed. If we find something we cannot handle we can engage CCI. Don’t hesitate to contact me/us through the proper support channels.

Kris

Show quoted text

On Thursday, July 19, 2018, 8:49 AM, brian.erch@... [Crestron] wrote:

?

Even if it was tongue in cheek, I actually had a good experience with Biamp Support with an earlier version of the 2.x modules. To their credit, they were able to speak with someone either in their office or with CCI, and they got me the answer I needed. Sometimes support departments are useful! Sometimes...

Re: Biamp Tesira 3.0 modules connecting but no control or FB

[email protected]

#228130

Even if it was tongue in cheek, I actually had a good experience with Biamp Support with an earlier version of the 2.x modules. To their credit, they were able to speak with someone either in their office or with CCI, and they got me the answer I needed. Sometimes support departments are useful! Sometimes...

Re: Dynamic Video Switcher Widget

#228129

I like that idea, I may give that a shot. I have already built the subpages so it would just be a matter of laying them over the video switcher and updating the tex/icon to match.

thanks for the input.

Re: Extron SPM351

#228128

Hello.
Yes, I am looking. Will you mind to share? Thanks in advance.

Re: Biamp Tesira 3.0 modules connecting but no control or FB

#228127

"If you’re still having issues, call Biamp Support and they can help out."

This was obviously a joke, yet I didn't see a smiley or anything at the end of your text...?

?? - Chip

Re: TSW-752 Help

[email protected]

#228126

We had a few spare SD Cards at the office from when we were dealing with 752 panels more. I swapped the SD Card and got the panel to react correctly, except the panel itself must have some sort of hardware issue also because it freezes up and reboots regularly. I'm going to return it to the seller. Thanks for the help.