Re: Biamp Tesira 3.0 modules connecting but no control or FB
"If you’re still having issues, call Biamp Support and they can help out."
This was obviously a joke, yet I didn't see a smiley or anything at the end of your text...?
?? - Chip
|
We had a few spare SD Cards at the office from when we were dealing with 752 panels more. I swapped the SD Card and got the panel to react correctly, except the panel itself must have some sort of hardware issue also because it freezes up and reboots regularly. I'm going to return it to the seller. Thanks for the help.
|
Re: Elk security system Help
toggle quoted message
Show quoted text
On Jul 18, 2018, at 5:24 PM, 'Jay Basen' jay.m.basen@... [Crestron] < Crestron@...> wrote:
?
You'll need to get a login on the Elk Products web site and download the protocol documentation for the alarm system. The documentation is well written and easy to implement. ?One thing to be aware of is that the commands for arming and disarming the alarm system all require embedding a user code in the serial string that you send to the alarm system.
You can then just trigger an SIO to send the serial string based on a button press. ?This works very well and the commands operate pretty much instantly. ?I use this method to arm Elk alarm systems based on keypad presses where a keypad is located by an outside door and voice commands. ?
Hope this helps
Jay
------ Original Message ------
Sent: 7/18/2018 6:08:55 PM
Subject: Re: [Crestron] Re: Elk security system Help
?
One more question : How do I send the code in simpl widows to elk security system .? Like the client wants to be able to just push arm stay on the touch panel and then it sends the code directly .?
Any ideas ??
?
or system startup (assuming the signals go to a MSP), or touchpanel online, etc.
?
Ok thanks ... so I can do an OR to get all the feedback of the trouble zone from elk and then send that signal to input of the MSEND to trigger it ..?
?
An event to send the text to the panel?
Caleb Radecky | Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC | Crestron Services Provider | 701 Beta Dr. #22 Cleveland OH 44143
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 | http://www.controlworks.com
From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, July 18, 2018 02:54
To: Crestron@...
Subject: Re: [Crestron] Re: Elk security system Help
Question
What do I add to the input of the MSEND ?
[image1.jpeg]
Thanks ,
Mingo
On Jul 16, 2018, at 7:54 PM, dustinwenninger@...<mailto:dustinwenninger@...> [Crestron] <Crestron@...<mailto:Crestron@...>> wrote:
Sorry forgot to add to #5: Drag serial signals you create on the output of the MSEND to the Input on the Dynamic Button List under Serial tab in the "Item Texts" area.
|
Re: Elk security system Help
You'll need to get a login on the Elk Products web site and download the protocol documentation for the alarm system. The documentation is well written and easy to implement. ?One thing to be aware of is that the commands for arming and disarming the alarm system all require embedding a user code in the serial string that you send to the alarm system.
You can then just trigger an SIO to send the serial string based on a button press. ?This works very well and the commands operate pretty much instantly. ?I use this method to arm Elk alarm systems based on keypad presses where a keypad is located by an outside door and voice commands. ?
Hope this helps
Jay
------ Original Message ------
Sent: 7/18/2018 6:08:55 PM
Subject: Re: [Crestron] Re: Elk security system Help
?
One more question : How do I send the code in simpl widows to elk security system .? Like the client wants to be able to just push arm stay on the touch panel and then it sends the code directly .?
Any ideas ??
?
or system startup (assuming the signals go to a MSP), or touchpanel online, etc.
?
Ok thanks ... so I can do an OR to get all the feedback of the trouble zone from elk and then send that signal to input of the MSEND to trigger it ..?
?
An event to send the text to the panel?
Caleb Radecky | Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC | Crestron Services Provider | 701 Beta Dr. #22 Cleveland OH 44143
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 | http://www.controlworks.com
From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, July 18, 2018 02:54
To: Crestron@...
Subject: Re: [Crestron] Re: Elk security system Help
Question
What do I add to the input of the MSEND ?
[image1.jpeg]
Thanks ,
Mingo
On Jul 16, 2018, at 7:54 PM, dustinwenninger@...<mailto:dustinwenninger@...> [Crestron] <Crestron@...<mailto:Crestron@...>> wrote:
Sorry forgot to add to #5: Drag serial signals you create on the output of the MSEND to the Input on the Dynamic Button List under Serial tab in the "Item Texts" area.
[Non-text portions of this message have been removed]
|
Re: Elk security system Help
Ok I use that but the client doesn’t want the numbers to show or highlighted on panel .. I guess I will have to move the feedback to another join number to avoid it to show?
toggle quoted message
Show quoted text
On Jul 18, 2018, at 5:14 PM, Caleb Radecky caleb@... [Crestron] < Crestron@...> wrote:
?
Stepper?
Sent from my mobile.
Caleb Radecky |?Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC |?Crestron Services Provider?| 701 Beta Dr. #22 Cleveland OH 44143
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 |?
-----Original Message-----
From: Mingo mingomaster@... [Crestron] [Crestron@...]
Received: Wednesday, 18 Jul 2018, 20:09
To: Crestron@... [Crestron@...]
Subject: Re: [Crestron] Re: Elk security system Help
?
One more question :
How do I send the code in simpl widows to elk security system .?
Like the client wants to be able to just push arm stay on the touch panel and then it sends the code directly .?
Any ideas ??
?
or system startup (assuming the signals go to a MSP), or touchpanel online, etc.
?
Ok thanks ... so I can do an OR to get all the feedback of the trouble zone from elk and then send that signal to input of the MSEND to trigger it ..?
?
An event to send the text to the panel?
Caleb Radecky | Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC | Crestron Services Provider | 701 Beta Dr. #22 Cleveland OH 44143
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 | http://www.controlworks.com
From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, July 18, 2018 02:54
To: Crestron@...
Subject: Re: [Crestron] Re: Elk security system Help
Question
What do I add to the input of the MSEND ?
[image1.jpeg]
Thanks ,
Mingo
On Jul 16, 2018, at 7:54 PM,
dustinwenninger@...<mailto:dustinwenninger@...> [Crestron] <Crestron@...<mailto:Crestron@...>>
wrote:
Sorry forgot to add to #5: Drag serial signals you create on the output of the MSEND to the Input on the Dynamic Button List under Serial tab in the "Item Texts" area.
[Non-text portions of this message have been removed]
|
Re: Elk security system Help
Stepper?
Sent from my mobile.
Caleb Radecky |?Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC |?Crestron Services Provider?| 701 Beta Dr. #22 Cleveland OH 44143
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 |?http://www.controlworks.com
toggle quoted message
Show quoted text
-----Original Message-----
From: Mingo mingomaster@... [Crestron] [Crestron@...]
Received: Wednesday, 18 Jul 2018, 20:09
To: Crestron@... [Crestron@...]
Subject: Re: [Crestron] Re: Elk security system Help
?
One more question :
How do I send the code in simpl widows to elk security system .?
Like the client wants to be able to just push arm stay on the touch panel and then it sends the code directly .?
Any ideas ??
?
or system startup (assuming the signals go to a MSP), or touchpanel online, etc.
?
Ok thanks ... so I can do an OR to get all the feedback of the trouble zone from elk and then send that signal to input of the MSEND to trigger it ..?
?
An event to send the text to the panel?
Caleb Radecky | Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC | Crestron Services Provider | 701 Beta Dr. #22 Cleveland OH 44143
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 | http://www.controlworks.com
From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, July 18, 2018 02:54
To: Crestron@...
Subject: Re: [Crestron] Re: Elk security system Help
Question
What do I add to the input of the MSEND ?
[image1.jpeg]
Thanks ,
Mingo
On Jul 16, 2018, at 7:54 PM,
dustinwenninger@...<mailto:dustinwenninger@...> [Crestron] <Crestron@...<mailto:Crestron@...>>
wrote:
Sorry forgot to add to #5: Drag serial signals you create on the output of the MSEND to the Input on the Dynamic Button List under Serial tab in the "Item Texts" area.
|
Re: Elk security system Help
One more question : How do I send the code in simpl widows to elk security system .? Like the client wants to be able to just push arm stay on the touch panel and then it sends the code directly .?
toggle quoted message
Show quoted text
On Jul 18, 2018, at 8:06 AM, Phil Bridges gravityhammer@... [Crestron] < Crestron@...> wrote:
?
or system startup (assuming the signals go to a MSP), or touchpanel online, etc.
?
Ok thanks ... so I can do an OR to get all the feedback of the trouble zone from elk and then send that signal to input of the MSEND to trigger it ..?
?
An event to send the text to the panel?
Caleb Radecky | Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC | Crestron Services Provider | 701 Beta Dr. #22 Cleveland OH 44143
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 | http://www.controlworks.com
From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, July 18, 2018 02:54
To: Crestron@...
Subject: Re: [Crestron] Re: Elk security system Help
Question
What do I add to the input of the MSEND ?
[image1.jpeg]
Thanks ,
Mingo
On Jul 16, 2018, at 7:54 PM, dustinwenninger@...<mailto:dustinwenninger@...> [Crestron] <Crestron@...<mailto:Crestron@...>> wrote:
Sorry forgot to add to #5: Drag serial signals you create on the output of the MSEND to the Input on the Dynamic Button List under Serial tab in the "Item Texts" area.
[Non-text portions of this message have been removed]
|
Re: Dynamic Video Switcher Widget
I just finalized a project with the same requirements. I laid out the switcher object as close as possible to the layout of the screen using the rows and columns feature. In our case it was a 4x2 video wall utilizing NVX. I created a few sub pages with a screen image object to simulate the different screen layouts, each sub-page screen layout has a large icon and adv text object to simulate the video switcher object. When the user drags an icon from the list, it gets dropped on one of the screens that's being covered by the sub-page. Then i make sure to change the icon and text on the sub-page to match.?
So the user is really dragging the image under the sub-page, but it's barley noticeable and works really well.
|
Re: Biamp Tesira 3.0 modules connecting but no control or FB
Hi Guys,
?Dumb mistake on my part. First time using them and I didn’t realize that the sub modules enable lines have to be populated to work. Thanks for the replies.
toggle quoted message
Show quoted text
On Jul 18, 2018, at 4:23 PM, dustinwenninger@... [Crestron] < Crestron@...> wrote:
?
You have to have the enable held high.? I have used the modules with no problems.
How are you controlling, Rs232 or IP?
|
Re: Biamp Tesira 3.0 modules connecting but no control or FB
You have to have the enable held high.? I have used the modules with no problems.
How are you controlling, Rs232 or IP?
|
Re: Biamp Tesira 3.0 modules connecting but no control or FB
If you’re still having issues, call Biamp Support and they can help out.
On Wednesday, July 18, 2018, 10:23 AM, Natalie Jackman natalie.jackman.1981@... [Crestron] wrote:
?
Use the initialized signals on the modules that interact with the feedback processor. Look for which one isn’t initializing. Then figure out why it isn’t, fix it, reload the program and try again.
The module won’t do anything if it doesn’t initialize correctly.
?
Hi All,
?I'm using the latest Biamp Tesira modules (V 3.0) from the market place with a Tesira Forte AVB CI and they are connecting but I cannot control levels or get FB. Firmware is the latest. Any thoughts Jeff Mackie?
Thanks,
|
Re: Biamp Tesira 3.0 modules connecting but no control or FB
Use the initialized signals on the modules that interact with the feedback processor. Look for which one isn’t initializing. Then figure out why it isn’t, fix it, reload the program and try again.
The module won’t do anything if it doesn’t initialize correctly.
toggle quoted message
Show quoted text
On Jul 18, 2018, at 12:14 PM, bb2479av@... [Crestron] < Crestron@...> wrote:
?
Hi All,
?I'm using the latest Biamp Tesira modules (V 3.0) from the market place with a Tesira Forte AVB CI and they are connecting but I cannot control levels or get FB. Firmware is the latest. Any thoughts Jeff Mackie?
Thanks,
|
Biamp Tesira 3.0 modules connecting but no control or FB
Hi All,
?I'm using the latest Biamp Tesira modules (V 3.0) from the market place with a Tesira Forte AVB CI and they are connecting but I cannot control levels or get FB. Firmware is the latest. Any thoughts Jeff Mackie?
Thanks,
|
Re: Elk security system Help
toggle quoted message
Show quoted text
On Jul 18, 2018, at 8:06 AM, Phil Bridges gravityhammer@... [Crestron] < Crestron@...> wrote:
?
or system startup (assuming the signals go to a MSP), or touchpanel online, etc.
?
Ok thanks ... so I can do an OR to get all the feedback of the trouble zone from elk and then send that signal to input of the MSEND to trigger it ..?
?
An event to send the text to the panel?
Caleb Radecky | Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC | Crestron Services Provider | 701 Beta Dr. #22 Cleveland OH 44143
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 | http://www.controlworks.com
From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, July 18, 2018 02:54
To: Crestron@...
Subject: Re: [Crestron] Re: Elk security system Help
Question
What do I add to the input of the MSEND ?
[image1.jpeg]
Thanks ,
Mingo
On Jul 16, 2018, at 7:54 PM, dustinwenninger@...<mailto:dustinwenninger@...> [Crestron] <Crestron@...<mailto:Crestron@...>> wrote:
Sorry forgot to add to #5: Drag serial signals you create on the output of the MSEND to the Input on the Dynamic Button List under Serial tab in the "Item Texts" area.
[Non-text portions of this message have been removed]
|
Re: Elk security system Help
or system startup (assuming the signals go to a MSP), or touchpanel online, etc.
?
Ok thanks ... so I can do an OR to get all the feedback of the trouble zone from elk and then send that signal to input of the MSEND to trigger it ..?
?
An event to send the text to the panel?
Caleb Radecky | Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC | Crestron Services Provider | 701 Beta Dr. #22 Cleveland OH 44143
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 | http://www.controlworks.com
From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, July 18, 2018 02:54
To: Crestron@...
Subject: Re: [Crestron] Re: Elk security system Help
Question
What do I add to the input of the MSEND ?
[image1.jpeg]
Thanks ,
Mingo
On Jul 16, 2018, at 7:54 PM, dustinwenninger@...<mailto:dustinwenninger@...> [Crestron] <Crestron@...<mailto:Crestron@...>> wrote:
Sorry forgot to add to #5: Drag serial signals you create on the output of the MSEND to the Input on the Dynamic Button List under Serial tab in the "Item Texts" area.
[Non-text portions of this message have been removed]
|
Re: Elk security system Help
Ok thanks ... so I can do an OR to get all the feedback of the trouble zone from elk and then send that signal to input of the MSEND to trigger it ..?
toggle quoted message
Show quoted text
On Jul 18, 2018, at 6:50 AM, Caleb Radecky caleb@... [Crestron] < Crestron@...> wrote:
?
An event to send the text to the panel?
Caleb Radecky | Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC | Crestron Services Provider | 701 Beta Dr. #22 Cleveland OH 44143
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 |
From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, July 18, 2018 02:54
To: Crestron@...
Subject: Re: [Crestron] Re: Elk security system Help
Question
What do I add to the input of the MSEND ?
[image1.jpeg]
Thanks ,
Mingo
On Jul 16, 2018, at 7:54 PM, dustinwenninger@...<mailto:dustinwenninger@...> [Crestron] <Crestron@...<mailto:Crestron@...>> wrote:
Sorry forgot to add to #5: Drag serial signals you create on the output of the MSEND to the Input on the Dynamic Button List under Serial tab in the "Item Texts" area.
|
Re: Elk security system Help
An event to send the text to the panel?
Caleb Radecky | Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC | Crestron Services Provider | 701 Beta Dr. #22 Cleveland OH 44143
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 | <>
From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, July 18, 2018 02:54
To: Crestron@...
Subject: Re: [Crestron] Re: Elk security system Help
Question
What do I add to the input of the MSEND ?
[image1.jpeg]
Thanks ,
Mingo
On Jul 16, 2018, at 7:54 PM, dustinwenninger@...<mailto:dustinwenninger@...> [Crestron] <Crestron@...<mailto:Crestron@...>> wrote:
Sorry forgot to add to #5: Drag serial signals you create on the output of the MSEND to the Input on the Dynamic Button List under Serial tab in the "Item Texts" area.
|
Re: Autonomic MMS-1e recall last playing
Tony So based on your idea, do I have to save every sound?? Anyone here having the same issue??
|
You can also try init / restore / betacleanup-ing them – I’ve seen some other “odd” quirks over the years with TSWs that are resolved
especially with betacleanup.
?
You can also try restoring the golden image (see answer id 5573)
?
Lincoln
?
--
Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Platinum)
ControlWorks Consulting, LLC |
D: (+1)440.771.4807 | O: (+1)440.449.1100? | F: (+1)440.449.1106
Crestron Services Provider | Biamp Audia Certified | Extron Qualified Independent Programmer
?
toggle quoted message
Show quoted text
From: Crestron@... [mailto:Crestron@...]
Sent: Wednesday, July 18, 2018 2:04 AM
To: Crestron@...
Subject: [Crestron] Re: TSW-752 Help
?
I have had 2 TSW-x60 panels that would not take a firmware update, 1 of which I finally got it to take.
Every time it would stay on it's current firmware.
When it succeeded I had added the panel to a processor and made sure the time / date was correct.
It then preformed the update without issue.
Just something for you to try.
|
If you're using the switch for power vs a Crestron ?power injector, ?try a different switch. ?I've seen postings other places that they can be picky about their PoE power.
toggle quoted message
Show quoted text
On Jul 18, 2018, at 2:03 AM, dtegg@... [Crestron] < Crestron@...> wrote:
?
I have had 2 TSW-x60 panels that would not take a firmware update, 1 of which I finally got it to take. Every time it would stay on it's current firmware.
When it succeeded I had added the panel to a processor and made sure the time / date was correct. It then preformed the update without issue.
Just something for you to try.
|
