开云体育

Thanks, All very helpful. Will have a look for the other thread too. Cheers Brad

Would you mind sharing your edited module with the discrete Home/Away inputs, Mark?

Chip, so you're saying I'm not crazy and I may be on to something? Might be time to update this module.

Commercial guy here, poking the bear! I use crosspoints... sometimes. It's a tool to use when appropriate. I tend to use crosspoints when a combination of digital and serial and/or analog signals are

I have a customer who 'mis-ordered' a TSCW-730, which is a panel/processor all in one, and they intend to use it as a touchpanel only with a DMPS3-300. 1) Should I use EISC in both units, and just

Have you try send WOL magic packet to turn on tv? It is working on new series Sony, and Panasonic tvs. Regards Sent: Thursday, September 03, 2015 3:00 PM To: Crestron@... Subject: RES:

From my years of programming experience, I can generalize when the use of crosspoints is useful. If you do large scale residential projects, chances are, you use them, or have a need for them. If you

I have a system with 2 large rooms. 23 displays in 1 room, 23 displays and a 16 panel video wall in another. 8 cable tuners, 4 for the video wall and 4 for overhead sound through BSS 806 for overhead

I have wondered why it's only an hour and half at the end of 301 class if it is so powerful. I would love to see a dedicated class, which I've asked for since 2012 The greatest thing I've gotten from

JUST USE XPOINTS ON BIG SYSTEMS!!!! it will make life easier. I promise. :)

This is incredibly easy to do in D3, select the button and assign it to be a toggle + Dim, done. In SIMPL you're going to need to have more than just a toggle.

Have you given the page a join? If it has no join number, it will always appear.

Make sure the module is 3 series compatible. If it isn't tested on 3 series it may be using semaphores instead of threadsafe, so a QMRMC may be the easiest solution.

As opposed to hitting F2 only to find the signal only goes to an ecross? I'd rather wade through buffers than wade through nothingness. Crestron@...> wrote:

Maybe the Panasonics support HTTP 1.1 (to keep a connection open) but for some reason the Crestron module is using HTTP 1.0? Using WireShark to look at the connection details when using IE would

There's nothing worse that taking over code, hitting F2 on a signal and having it trace to 20+ buffers and then realizing that the whole project is built that way. I know tracing cross point connects

Has anyone had success controlling an AW-HE130 over ethernet? This project was supposed to get an HE-120 but they were out of stock (likely discontinued) so we got the 130. Everything appears to be

Hi there, I am having an issue where I have a subpage for Single setpoint control on thermostat CHV-TSTAT and everytime that i upload my files to the mc3 or the screen goes on standby and i wake the

Keep in mind that all your touchpanel page logic could be on the to side of the crosspoint, that way touchpanel can operate independently, but still show the same feedback information depending on

As a taco on to Oliver's note, don't use a & in the room name of the Fusion room symbol. It makes the Fusion Symbol discovery process choke and die. Basically, avoid '&' anywhere it might possibly be