¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Samsung ED65D

 

There is a module in the Files-> modules section of the forum ? "Samsung ME series lite"

It is a one way serial with volume cotroll and analog fb.

I have tested it and it works :)
Samsung ED65D

Greg Barnes
 

¿ªÔÆÌåÓý

Does any have rs232 code for the Samsung ED65D? Or know of a module that works?


Sent from my Verizon Wireless 4G LTE smartphone
Yamaha RX-V675 Airplay command

 

Hello everybody!
Does someone have the Yamaha RX-V675 airplay direct command (IR or Ethernet) for zone 2?
The Main zone selection is automatic, but with zone 2, I need to press "NET" button in the remote control to switch among/between (i need to learn when to use it) three options (server, iRadio and airplay).

Best Regards,
Rafael Costa
SmartGraphics xPanel on Surface 3?

 

Anybody here have any experience with a kiosk xPanel on a Surface 3? I'm having difficulty getting a resolution that just looks right.?

Re: Divisible Room GUI

 

+1. Good Stuff!

::::::::::::
J Pride


On Wed, Oct 1, 2014 at 11:10 AM, Neil Dorin neildorin@... [Crestron] <Crestron@...> wrote:
?

Sorry no, but I'm still laughing at the words "standard divisible room" being used consecutively....

On Wed, Oct 1, 2014 at 9:35 AM, bdige@... [Crestron] <Crestron@...> wrote:
?

Hi,

Does anyone have a standard divisible room icon that they do not mind sharing?

Thanks,

B
Re: TSD-2020 to DGE-2 via DM-16x16

 

Thanks, I didn't try that, it's on the newest version.

I like that TBTS has added more people to answer the calls in under an hour now, but the new lower tier is somewhat lacking. Hopefully the turnover will be low so they get a chance to learn the thousands of details like that one.
Re: BiPad alternative

 

¿ªÔÆÌåÓý

Thanks Pat


On Oct 2, 2014, at 8:23 PM, PatM Gmail pat.molettieri@... [Crestron] <Crestron@...> wrote:

?

We just used did a system with the Zektor ProAudio 16 DS. ?16x16 with analog, Toslink and coax inputs. ?Had some funkiness on the IP control so we changed to serial and works great. ?

Pat M


From: "Jay Basen jay.m.basen@... [Crestron]" <Crestron@...>
Reply-To: <Crestron@...>
Date: Thursday, October 2, 2014 at 5:35 PM
To: <Crestron@...>
Subject: Re: [Crestron] Re: BiPad alternative

?

Thanks

On 10/2/2014 2:12 PM, smcnally@... [Crestron] wrote:
?

Autopatch works well, too

Re: BiPad alternative

 

We just used did a system with the Zektor ProAudio 16 DS. ?16x16 with analog, Toslink and coax inputs. ?Had some funkiness on the IP control so we changed to serial and works great. ?

Pat M


From: "Jay Basen jay.m.basen@... [Crestron]" <Crestron@...>
Reply-To: <Crestron@...>
Date: Thursday, October 2, 2014 at 5:35 PM
To: <Crestron@...>
Subject: Re: [Crestron] Re: BiPad alternative

?

Thanks

On 10/2/2014 2:12 PM, smcnally@... [Crestron] wrote:
?

Autopatch works well, too
Re: crestron app... could not complete purchase..

 

Hi Melan,
I met this issue before.
- Install Crestron App.
- turn off Ipad and turn on again.
- Start upgrade normally.

I spent 2 days for this. Oh :)


2014-10-03 5:52 GMT+07:00 Peter Jablonicky peterjablonicky@... [Crestron] <Crestron@...>:

?

Take a look on answer id #5377 at true blue support.
Let us know if it helps.

D¨¾a 2.10.2014 o 21:40 melan.loyd@... [Crestron] nap¨ªsal(a):
?

Hi,


Anyone knows how to solve about this problem? I have just upgraded my crestron app in my ipad and itunes charged me $99 for upgrade to pro but it will appears ..could not complete purchase.. This is the first time i downloaded the app on my ipad.. I also tried to delete and re install the app but the same happen will appear after click OK button asking me to retrieve the application..

Please help.. Thanks



Regards..?
Re: crestron app... could not complete purchase..

 

¿ªÔÆÌåÓý

Take a look on answer id #5377 at true blue support.
Let us know if it helps.

D¨¾a 2.10.2014 o 21:40 melan.loyd@... [Crestron] nap¨ªsal(a):

?

Hi,


Anyone knows how to solve about this problem? I have just upgraded my crestron app in my ipad and itunes charged me $99 for upgrade to pro but it will appears ..could not complete purchase.. This is the first time i downloaded the app on my ipad.. I also tried to delete and re install the app but the same happen will appear after click OK button asking me to retrieve the application..

Please help.. Thanks



Regards..?
Re: DMPS Video Lag

Steve Kerr
 

Ran Into same on last install: DMPS300, two displays: one NEC np-pa622u and one sharp Lc70eq10 i think. No lag on NEC but terrible lag on sharp, it's so obvious whe. They're both visible side by side. Always had lag on our sharp in our office too, can't use tv speakers with VC cause sync is so terrible

Thanks,
Steve
Re: TSD-2020 to DGE-2 via DM-16x16

 

Do you have the correct (old) firmware in the RMC-SCALER-C connected to the 2020?

I haven't tried it with a DM frame in the mix, but that was a required ingredient (and it is called out on online help) for a DGE2->DM-TX->RMC-SCALER-C->TSD-2020 install.

Lincoln

--
Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Gold)
Crestron Services Provider | Biamp Audia Certified | Extron Control Professional

-----Original Message-----
From: Crestron@... [mailto:Crestron@...]
Sent: Thursday, October 02, 2014 5:03 PM
To: Crestron@...
Subject: [Crestron] TSD-2020 to DGE-2 via DM-16x16

Crestron says it should work no problem and has even RMA'd what turned out to be a perfectly good DGE-2, but the touch just barely works and only if you use 3 fingers. Even then it doesn't register the touch or release, and as soon as you let go the cursor jumps to the top of the screen and starts creeping left.

There's also a Windows login popup from the DGE-2 that Crestron said should only show up when you try to use third party mice.

DGE-2 -> DMC-HD card -> DM-16x16 RPS -> DMCO-5555 -> *any length of cable* -> Scaler-C -> TSD-2020

The USB is routed properly in the program, and if you plug the TSD-2020 USB directly into the DGE-2 it works fine. All firmware is current, and all symptoms are identical with two separate DGE-2s. I haven't replaced the micro USB from the 2020 but have replaced the USB from the DGE-2 to the DMC-HD.

Maybe it's just a new "feature" in the current firmware?

------------------------------------
Posted by: logantv@...
------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.

------------------------------------

Yahoo Groups Links
Re: BiPad alternative

 

¿ªÔÆÌåÓý

Thanks
On 10/2/2014 2:12 PM, smcnally@... [Crestron] wrote:

?

Autopatch works well, too
TSD-2020 to DGE-2 via DM-16x16

 

Crestron says it should work no problem and has even RMA'd what turned out to be a perfectly good DGE-2, but the touch just barely works and only if you use 3 fingers. Even then it doesn't register the touch or release, and as soon as you let go the cursor jumps to the top of the screen and starts creeping left.

There's also a Windows login popup from the DGE-2 that Crestron said should only show up when you try to use third party mice.

DGE-2 -> DMC-HD card -> DM-16x16 RPS -> DMCO-5555 -> *any length of cable* -> Scaler-C -> TSD-2020

The USB is routed properly in the program, and if you plug the TSD-2020 USB directly into the DGE-2 it works fine. All firmware is current, and all symptoms are identical with two separate DGE-2s. I haven't replaced the micro USB from the 2020 but have replaced the USB from the DGE-2 to the DMC-HD.

Maybe it's just a new "feature" in the current firmware?
Re: BiPad alternative

 

Autopatch works well, too
Re: BiPad alternative

 

¿ªÔÆÌåÓý

Thanks Paul
On 10/2/2014 1:47 PM, Paul Cunningham paul.cunningham@... [Crestron] wrote:

?
Typically Biamp or Extron, depending on specifics

On Thu, Oct 2, 2014 at 12:29 PM, Jay Basen jay.m.basen@... [Crestron] <Crestron@...> wrote:
?

Since Crestron has discontinued the BiPad I'm curious what people are
using as an alternative. I'm looking a project with a large commercial
space where speakers will be driven through existing amps with 70v outputs.

Thanks

Jay
Re: BiPad alternative

Paul Cunningham
 

Typically Biamp or Extron, depending on specifics

On Thu, Oct 2, 2014 at 12:29 PM, Jay Basen jay.m.basen@... [Crestron] <Crestron@...> wrote:
?

Since Crestron has discontinued the BiPad I'm curious what people are
using as an alternative. I'm looking a project with a large commercial
space where speakers will be driven through existing amps with 70v outputs.

Thanks

Jay
crestron app... could not complete purchase..

[email protected]
 

Hi,


Anyone knows how to solve about this problem? I have just upgraded my crestron app in my ipad and itunes charged me $99 for upgrade to pro but it will appears ..could not complete purchase.. This is the first time i downloaded the app on my ipad.. I also tried to delete and re install the app but the same happen will appear after click OK button asking me to retrieve the application..

Please help.. Thanks



Regards..?
Re: Upgrading firmware of LC-1500B failed, what is my option now

 

¿ªÔÆÌåÓý

Sounds like the panel¡¯s flash memory failed.
Can¡¯t think of another solution apart from repair or replace.
Check ebay, you may be able to find a replacement at a decent price.
?
Tray
?
?

Sent: Thursday, October 02, 2014 2:51 PM
Subject: [Crestron] Upgrading firmware of LC-1500B failed, what is my option now
?
?

I was testing some old CNMSX-AV Processor along with LC-1500B touch panel, I noticed when I upload a file to the LC-1500B, I will end up with a message of "Flash Memory 2000....."? I had to power cycle the touch panel to get the panel to run the program.? I figure I might have some old firmware in the LC-1500B so I download the firmware version LC1500 which is 5.00.80 version.


During the upload of the firmware, to loaded both BB50080a.csf and BB50080b.csf.? The loading was ok and I got a upload finished message from Viewport.? Afterward, I lost the panel.? The panel can't communicate with the processor via Cresnet nor it can go into setup using power cycle.? I end up with a paper weight.


Does any one have experience with this situation and know if there is a way out.? Tech Support told me the only way to send the unit back for repair and pay the repair bill.? I don't think my company will pay to repair such an old touch panel and now I am one touch panel less from my testing tools.


Any suggestion will be appreciated.


Peter Koo
Upgrading firmware of LC-1500B failed, what is my option now

[email protected]
 

I was testing some old CNMSX-AV Processor along with LC-1500B touch panel, I noticed when I upload a file to the LC-1500B, I will end up with a message of "Flash Memory 2000....." ?I had to power cycle the touch panel to get the panel to run the program. ?I figure I might have some old firmware in the LC-1500B so I download the firmware version LC1500 which is 5.00.80 version.


During the upload of the firmware, to loaded both BB50080a.csf and BB50080b.csf. ?The loading was ok and I got a upload finished message from Viewport. ?Afterward, I lost the panel. ?The panel can't communicate with the processor via Cresnet nor it can go into setup using power cycle. ?I end up with a paper weight.


Does any one have experience with this situation and know if there is a way out. ?Tech Support told me the only way to send the unit back for repair and pay the repair bill. ?I don't think my company will pay to repair such an old touch panel and now I am one touch panel less from my testing tools.


Any suggestion will be appreciated.


Peter Koo
57741 - 57760 of 256471