开云体育

I have an application where we are using DM to route various sources to various displays. The original SOW stated that the owner wanted to manually switch sources to displays via XPanel but now they

When defining inputs and outputs in S+ do we need to have the different signal types in the below order? Or can they be laid out a little different? I know inputs should always be above the outputs.

Panel On/Off works great.

i have a large system where the AV/TP's run on an AV3, the lighting runs on an MC3 and a PAC2 handles the actual lighting - all the lighting signals from the AV3 just flow through to the MC3 i.e. no

Not all extron comes with updated firmware. Normally not from my experience. If it still doesn't work after firmware, get the protocol and break apart the module to see what needs to be changed to

The following Crestron poll is now closed. Here are the final results: POLL QUESTION: Toolbox System Monitor, what is your average CPU % ? CHOICES AND RESULTS - <90%, 1 votes, 5.56% - <25%, 15 votes,

I just got this IN1606 out of the box last week, so I'm sure it came w/ the latest firmware. I'm using attached module that I got from another member. it look clear and very well done, but some how it

Or you can use rs232 codes to operate everything else (not the tablet media player control). Sent from my pocket computer

Thanks, I knew that the 25 preset module stored the x/y positions for presets but I overlooked the NVRAM issue, I will re-org the tree as its a large program and see if this resolves the issue. I also

Have you got this figured out yet?? I had issues controlling these two switchers until I updated firmware now they work fine for video switching and audio control.? Let me know if you are still

Depends on the device, but for most of them you would leave the connection open so you get feedback. There are generally two concerns: 1) send a command periodically to keep the device from timing out

I have put a module together to manage the connection of a TCP client. Basically when a string is sent it will open the connection and upon receiving data it will close the connection. I believe this

Hi rogiervs, I don't think they are visonic, I think soufiane is also trying to make a module from my poor French Rogiervs if I can do anything to help please let me know Cheers Nathan

Hey everyone, So I've been working on a s+ module to control Pandora/pianobar on a raspberry pi. It's my first attempt at a s+ module and would like some feedback. I've shared it on dropbox if you

Our module (http://controlworks.com/modules/Product.aspx?pid=97) exposes all* of the functionality available on the NX-587E, including the siren status and previous alarm memory for each partition.

But that's not Visonic, right?

Hi soufi , sorry my French is poor can I use the modules you have linked to?

You'll probably have no problems as long as you can pull an mjpeg stream from it.

Have you ever tried the Panel on and off commands from mdc? Just curious From: <ajish.raju@...> Reply-To: <Crestron@...> Date: Friday, February 28, 2014 at 4:29 AM To:

Connect the media player directly to HDMI4, connect other sources to different input. Media player access is through ?Home? button. When the player is selected in the Home screen the TV will switch