开云体育

There are a couple Crestron modules in the database called "Presentation Timer v1.0" and "Count-down Timer" that should do what you want. Both have analog outputs for timer status.

I can't get this to work either. Works with 2 series no problem...what gives?

You should be able to create a system export and dictate what devices are include in it in the properties.

The 25 presets module uses NVRAM on the processor to store presets - presets are NOT stored on the camera itself. This has all kinds of potential pitfalls but a few to keep in mind (a) You need

You can always use an Analog Increment that you initialize to 60d. Set the repeat to 1s and then just hold the down. There is also a similar way with analog ramp where you set the time to 65535s and

I might have a module laying around that will help you; I'll see if I can find it

I am looking for either a symbol or module that will show on a touch panel a countdown timer from 60 minutes to 0 in one second increments. Plenty of clock and timer symbols in SIMPL but none appear

I am pulling my hair out trying to get presets to work with this camera. I have an AV3 controlling a Sony EVI-H100V PTZ camera and I am using the sony module from the website, I have tried all of them

Hi guys, can you recommend the most affordable security camera/ CCTV / IP camera and DVR that are easily integrated to CRESTRON. I need it to be available online because i'll just have it shipped to

Hello, Does anyone have a module for Extron IN1606 or1608? Thanks? C>

Module crestron OPC Security SIEMENS http://crestron-opc.6mablog.com/ Le vendredi 28 Février, 2014 12:03, "rogier@..." <rogier@...> a écrit: ? On dirait que, devra me faire une de

I am trying to do a simpl + module to display different time zones on a Crestron mobile pro G but before that i want to know if anyone has posted a module for this earlier in the files section yet.

WOL works even after 30 minutes on this unit.

Anyone using Dynamic Graphics on an Android device (like Galaxy phone)? I've set up a FTP server for the graphics and my other TP's do not have a problem getting the images, except the Galaxy S4. Any

I used the Samsung IP module available from the files section of this forum. I am not sure if there is a setting to keep the lan port on always. I will try the wol after 30 minutes from the panel and

HI, I want to create a module that i can use in D3Pro, but can't figure out how to create Crestron SIMPL Windows Module cmc module. Any tips are welcome. Cheers, TV

Looks like it, will have to get me one of these interfaces to test. Thanks for the link!

The rs232 control "power link" has been worked out , and control of the system is now possible with just the rs232 kit The protocol is here http://www.domoticaforum.eu/viewtopic.php?f=68&t=6517

Jeff , I have a very nice Echo 360 module and methods to set up the appliance if you cannot find one that fully works. Mike Sent: Thursday, February 27, 2014 2:09 PM To: Crestron@...

Hi Neil, If that module is still around I would really appreciate a copy. Regards Mark