开云体育

I have a wallpaper someone posted a while back with all the shortcuts on it. I can upload it to the files section if anyone is interested. It may even be there already. On my phone so I cant look to

I have had an issue with Epson projectors occasionally locking up and needing to be power cycled. Very sporadic, not limited to a single model, and unable to duplicate on the bench. I have many rooms

CEN-WAP-ABG-1G

Talk to the DM from a single program in one processor and do whatever you want with the rest. I've run larger systems off a single CP3

I strongly recommend Ruckus For your job spec assuming you're only providing coverage for the inside you will need one zone director 1100 series (1106 to be ore exact) The configuration is pretty

Pakedge wap-w5n with CTL-W5N controller. If price matters you can go down to their macro cell version. Built with IOS in mind and works great. We did a 34k square foot home and 4 covers the whole

The [enable] input of an SIO is optional. Leave it unconnected unless you have a compelling reason to enable/disable the SIO. Just type Trigger into Str1, no need to convert. The Str parameter that

Many are listed in the help if you search for 'shortcut', you'll see a topic for keyboard shortcuts

Hmm.. pretty sure I was told I had to use Ctrl-Shift-G to get to a join number when this feature first came out, but you are right simply using Ctrl-G works fine. I forgot to include the Shift in the

Wow. Didn't know about CTRL+SHIFT+B. I always just held down ENTER so that it would autoname the signals. Where are these shortcuts listed? herald@...> wrote:

Interesting! I knew and used Ctrl-Shift-B for auto-fill (which is undo-able, and will do ranges), but hadn't encountered Ctrl-Shift-H. Odd that there are two; odd that they name differently. Why you

Thanks In Binary "Trigger" is 0) 0 1 1 1 0 1 0 0 1) 0 1 1 1 0 0 1 0 2) 0 1 1 0 1 0 0 1 3) 0 1 1 0 0 1 1 1 4) 0 1 1 0 0 1 1 1 5) 0 1 1 0 0 1 0 1 6) 0 1 1 1 0 0 1 0 do I need to covert this to Hex or

The port number is entered as a parameter in the detail view of the UDP symbol. For basic interaction between Crestron and a Bright Author project, use an SIO with its serial output connected to the

Tks for your help, the port it was enanble correct, but the simple detail was the problem, In toolbox, [function]/[webAcess] this function is not mark and the project to load not select, I make this

Biggest thing to be aware of is how you communicate to the 32x32. I have a job going now with two 32x32s at head end. In my case i was using the same code in each room and so I was defining all the

Heh! I'm not sure I'm all that pretty after 8 months of frowning at the TSW ;-)

Dead simple web interface for anyone savvy (but if you're pretty as well, that couldn't hurt). There is also a CLI for tweaks if you're in a unique situation that needs it

Heath, You won't have any trouble setting up a ruckus system. The director (hardware) had a beautiful web interface and configures the AP's for you. You may spend a couple hours tweaking (just because

Paul, is that something a pretty-savvy guy can set up? How about the controller? I don't wind to wind up in a Cisco-style command line where I'm depending on "how-tos" to make it work. I've signed up

Every now and then I mistype (always when I'm editing a touchpanel in Simpl) and Crestron decides to put a signal name on every join of the touchpanel, which is completely NOT undoable. Today I