开云体育

Has anyone here tried the openweathermap api for weather? It can send out data in either JSON (boo) or XML (yay) format. Looks like it's not overly complicated, either. http://openweathermap.org/API

You can also have code so when anything is routed to the display that the display will turn on. So when you go combined and a source gets routed, it will turn on. I also make my vol modules so that

I usually use analog initialize symbols to store the state of power, input selection, volume level etc. When a room that is on is combined with a room that is off, all of the analog value of the room

Also compact file system. There's some sort of memory spike when loading adagio programs. Compact then try and load. Sent from my pocket robot!

Hi Folks, I have a Sharp LC80LE645 connected to a DMPS100 via HDMI. Is there a chance to use the HDMI Audio return channel to get the Audio signal of the TV into the DMPS? Thanks in advance

I have had this happen before. You will need to do the HW & SW reset to get it back to OOTB and you should be good to reload your update. No rhyme or reason for why it happen, but hey it is an Adagio.

Just curious of how others handle this issue but here goes. I have a room which has a position sensor on the wall. Each room has a panel and when the wall closes the power button on each panel

Hi, After a minor update on a Simpl+ rather complex Adagio program, uploading the new program failed and left the unit without a program. I can't load a new one (or the old one) using Toolbox, not

It's a built in SIMPL+ function -- Lincoln King-Cliby, CTS Sr. Systems Architect | Crestron Certified Master Programmer (Silver) ControlWorks Consulting, LLC Crestron Services Provider

I know this thread is a bit dated, but I've spent a good 1/2 day chasing a Toolbox Lockup issue on a Win 7 & Win 8 system. I needed to kill the process in Task Manager after trying Network Discovery.

Awesome - where is SendMailAdvance? Cheers

SendMailAdvance lets you set the port ________________________________________ Sent: Saturday, May 04, 2013 12:07 PM To: Crestron@... Subject: [Crestron] Re: JangoSMTP Hmmm apparently BT

Hmmm apparently BT now use port 587 and have blocked port 25!? As Send Email doesn't have an input for the port, should I setup a TCP/IP connection and specify the port or is there another working

I especially like that I have three different versions of MS-SQL running on my beta VM. wrote:

I agree Geoff. Stupid - and I'm not thrilled that we have to lay out a lot of $$ for MSDN subscription to get it. It's evidently because 3-series runs on windows mobile CE (or something like that)

Anybody else use Jango to send emails? I used to use my ISP's SMTP (btconnect) but since they migrated to Office365 it's stopped working, so I thought JangoSMTP would work, but I get error: "Message

What a second.. I haven't really been following S# discussion closely at all as it doesn't seem to be ready for prime time and I don't have a 3-series processor yet, but they're REQUIRING Visual

Heh Neil. Missed that reply ;-). Most troublesome WAP I think I've every set up.

I know exactly how to do this in S# or any OOP language. It almost runs itself. Fire it up and let it go. If another comes in, fire up another. If I could dynamically name a wait, I'd be okay, but

In case you go with something along these lines, remember that GetHSeconds() can wrap back to 0. The elapsed_time() function needs to test for this condition.