¿ªÔÆÌåÓý

when i connect with crestron tool bo it shows the system with this error log .

System log:

1. Notice: System startup: CslaveAV2 Cntrl Eng [v4.007.0004 (Mar 05 2012), #0890237E]
TimeStamp: 03:15:15 3-20-00 UpTime: 0 days 00:00:03.22 Task: IdleTask
Total Errors Logged = 1
End of System log

and i cant send program and vision pro design to module when i select it it shows message as the device does not support the required capabilities for the dialog to function .

my system is AV2 .

Was "debug" called out somewhere in the docs? I don't believe you want that. I haven't worked with one in a while, so I don't remember what the other options are. "Uart" comes to mind...

- Chip


--- In Crestron@..., "grumpy_cake" <crestron@> wrote:

Hi,

I hope someone can have some patience and spoon feed me through this as I have sat here for hours and have got nowhere. I am guessing a bit so please let me know if I am doing something stupid.

Firstly this may all be down to me using a module that may not work as I can't find my TV.

I have a: UE55ES7000
Closest I can find is the UN55ES8000

I've made up a cable for EX-LINK control using the diagram in the module pdf

(integrated_partner_modules/help_files/959/samsung_un55es8000_v1_0_help.pdf)

Tested cable with multi-meter, seems fine.

I have set the value of the RS232 mode to Debug.

Tried a basic test with the module set up like this:



I'm getting nothing in debugger on Samsung_Rx$ and the TV responds to nothing¡­

Any help appreciated.

Thanks.

Was "debug" called out somewhere in the docs? I don't believe you want that. I haven't worked with one in a while, so I don't remember what the other options are. "Uart" comes to mind...

- Chip


--- In Crestron@..., "grumpy_cake" <crestron@> wrote:

Hi,

I hope someone can have some patience and spoon feed me through this as I have sat here for hours and have got nowhere. I am guessing a bit so please let me know if I am doing something stupid.

Firstly this may all be down to me using a module that may not work as I can't find my TV.

I have a: UE55ES7000
Closest I can find is the UN55ES8000

I've made up a cable for EX-LINK control using the diagram in the module pdf

(integrated_partner_modules/help_files/959/samsung_un55es8000_v1_0_help.pdf)

Tested cable with multi-meter, seems fine.

I have set the value of the RS232 mode to Debug.

Tried a basic test with the module set up like this:



I'm getting nothing in debugger on Samsung_Rx$ and the TV responds to nothing¡­

Any help appreciated.

Thanks.

For what its worth, I eventually got EX-Link working, but it was flaky at best. I was only using it for power and switching, and it worked about 70-80% of the time.

Since I was using DM products, I used the CEC codes and they are working great!


--- In Crestron@..., Ray Jain <rjain@> wrote:

One thing about Samsung I have noticed is rs-232 or IR you have to first turn the TV on or off woth a remote to get control over the display.

---------------------------------------
Ray Jain, Junior Programmer
(832) 618-9672
rjain@<mailto:rjain@>

SUMMIT INTEGRATION SYSTEMS

On Apr 28, 2013, at 6:27 PM, "grumpy_cake" <crestron@<mailto:crestron@>> wrote:



Hi,

I hope someone can have some patience and spoon feed me through this as I have sat here for hours and have got nowhere. I am guessing a bit so please let me know if I am doing something stupid.

Firstly this may all be down to me using a module that may not work as I can't find my TV.

I have a: UE55ES7000
Closest I can find is the UN55ES8000

I've made up a cable for EX-LINK control using the diagram in the module pdf

(integrated_partner_modules/help_files/959/samsung_un55es8000_v1_0_help.pdf)

Tested cable with multi-meter, seems fine.

I have set the value of the RS232 mode to Debug.

Tried a basic test with the module set up like this:



I'm getting nothing in debugger on Samsung_Rx$ and the TV responds to nothing?€?

Any help appreciated.

Thanks.

Thanks OP, that's exactly what I mean, is it worth the time to do that vs. just using remove. I know what you mean though...

The attenuation is taken as a string, and will have a space at the end, which isn't critical for me. But yes, if I wanted an integer I would have to check the first byte to see if it's 0x2D and then either -ATOI or just ATOI the group.

--- In Crestron@..., "olly_penguin" <oliver.hall@> wrote:

Hi Matt,

That looks like a classic candidate for a state machine.

I.e. rather that attempt to parse a complete message in one mouthful, implement a routine that eats numbers, delimited by white space or the lf/cr.

Lf/cr resets the state machine and spits out your interesting data, and for each "number" you maintain a couple of state variables (data chunk, sub element).

And Atoi won't work on negative numbers will it?

Sorry this is a bit brief/vague, but I hate typing on my phone :)
All the best,
Ol

--- In Crestron@..., "matt_rasmussen_2000" <mjrtoo@> wrote:

Yeah, right, the string is not always the same, like I said, the attenuation value can be from 1 to 4 bytes long, for each channel. I was thinking of getting the LEN of the attenuation data, then MID the string based on that but seems more work than the removes anyway.

--- In Crestron@..., "jrw_96" <jrw_96@> wrote:

Use a buffer and collect everything in said buffer. Then just break it down as necessary. Only if the incoming strings are predictable and/or the end of the string is always &#92;x0d&#92;x0a...

If the above is true then this should be gravy for you. It's when you do NOT have set points (delimiter(s) and actual sub-headers differentiating the substring/channel info) [always seems to be my case with crc's and what not] that you have to wonder "is this really worth it" imo...

JRW

--- In Crestron@..., "matt_rasmussen_2000" <mjrtoo@> wrote:

Here's the string

0 0 0 0 1 0 0 0 0 0 0 0 -44 0 0 0 0 0 0 0 0 -27 0 0 0 0 0 0 0 1 -26 0 0 0 0 0 0 0 0&#92;x0d&#92;x0a

The first three 0's are status of the device itself, then the next group of 9 (not including spaces) are individual channel data. So channel 1 = 0 1 0 0 0 0 0 0 0
channel 2 = -44 0 0 0 0 0 0 0 0
channel 3 = -27 0 0 0 0 0 0 0 1
channel 4 = -26 0 0 0 0 0 0 0 0

the first set of chars before the first space can be 0...-100, all the other data is a single byte.

My method is using REMOVE statements like below
status1 = ATOI(REMOVE("&#92;x20", rx$);
status2 = ATOI(REMOVE("&#92;x20", rx$);
status3 = ATOI(REMOVE("&#92;x20", rx$);

Attenuation[1] = REMOVE("&#92;x20", rx$);
ch1Clip[1] = ATOI(REMOVE("&#92;x20", rx$);
etc.,

all the way through the string. Not sure if it's even worth going through breaking up the string into channel groups and working on it that way. What do you think, splitting hairs?

www.adhocelectronics.com for EnOcean products. Check out the wireless light switches. They don't need batteries ever- electricity is generated by the button press and release. I have several of them at home and they work great. There are several receivers to choose from including relay outputs and rs232. I have a module I can post if you need it.

You can find some more selection on amazon. Leviton is oem'ing the product and have some other products that are interesting. Anything EnOcean is compatible.

Mb

Urc kp900 using the Crestron rf hack?
--- In Crestron@..., "Mark" <access@> wrote:

One thing about Samsung I have noticed is rs-232 or IR you have to first turn the TV on or off woth a remote to get control over the display.

---------------------------------------
Ray Jain, Junior Programmer
(832) 618-9672
rjain@...<mailto:rjain@...>

SUMMIT INTEGRATION SYSTEMS

On Apr 28, 2013, at 6:27 PM, "grumpy_cake" <crestron@...<mailto:crestron@...>> wrote:



Hi,

I hope someone can have some patience and spoon feed me through this as I have sat here for hours and have got nowhere. I am guessing a bit so please let me know if I am doing something stupid.

Firstly this may all be down to me using a module that may not work as I can't find my TV.

I have a: UE55ES7000
Closest I can find is the UN55ES8000

I've made up a cable for EX-LINK control using the diagram in the module pdf

(integrated_partner_modules/help_files/959/samsung_un55es8000_v1_0_help.pdf)

Tested cable with multi-meter, seems fine.

I have set the value of the RS232 mode to Debug.

Tried a basic test with the module set up like this:



I'm getting nothing in debugger on Samsung_Rx$ and the TV responds to nothing?€?

Any help appreciated.

Thanks.

Hi,

I hope someone can have some patience and spoon feed me through this as I have sat here for hours and have got nowhere. I am guessing a bit so please let me know if I am doing something stupid.

Firstly this may all be down to me using a module that may not work as I can't find my TV.

I have a: UE55ES7000
Closest I can find is the UN55ES8000

I've made up a cable for EX-LINK control using the diagram in the module pdf

(integrated_partner_modules/help_files/959/samsung_un55es8000_v1_0_help.pdf)

Tested cable with multi-meter, seems fine.

I have set the value of the RS232 mode to Debug.

Tried a basic test with the module set up like this:



I'm getting nothing in debugger on Samsung_Rx$ and the TV responds to nothing¡­

Any help appreciated.

Thanks.

So i have a client that currently owns a Tesla Model S. Hes a tech junky and loves his iPhone app that controls his car. I thought it would be pretty cool if I could incorporate some of those controls into his touch panel. Anyone ever tried this?

I opened MasterInstaller today to update a few things. I was shocked at how fast the downloads occurred. I had a D3 template file that was 285meg, Crestron Database 152meg, and Toolbox 67meg. All 3 were done downloading within 90 seconds. This is a significant departure from anything I've seen in the last 9 years of downloading from there.