the IP in the table IP if from the Master processor (your system, for ex,
adagio) and the IP ID is the ID assigned to the CenIdoc in the program.
If the adagio cant find the cen idoc, check if the adagio is in the same
subnet (for ex. 192.168.0.100)
_____
De: Crestron@... [mailto:Crestron@...] En nombre de
jimathome80@...
Enviado el: s¨¢bado, 27 de abril de 2013 14:28
Para: Crestron@...
Asunto: [Crestron] Re: Discovery of idoc issue.
I have now made a connection to the idoc via serial cable and then by using
the toolbox device tree view and the correct com port.
I then right click on the idoc device and select functions.... Where do I go
from here to make this device discoverable via the composer wizard.
If I select Ethernet addressing it shows IP address as 192.168.0.4 with dhcp
not ticked.
Or if I select ip table setup it shows me ...
Ip Id 05. IP address 192.168.000.002
What and where do I need to enter this info
I've gone back into the adagio composer and made the idoc ipid 05 as it
originally said ip id 03 here then what should I do next?
Thanks to anybody that can point me in the right direction
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> ,
"jimathome80@..." <jimathome80@...> wrote:
I've not managed to set IP address yet. I have serial to rj11 cable from
pc to idoc and then using view port select the same connection that I
originally used to find IP address of aads then I run the wizard but the
next screen shows a yellow dot next to idoc saying that's its not
discovered! Could the com port setting have changed on my pc?
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , Phil
Bridges <gravityhammer@> wrote:
Have you set an IP address in the iDoc? IIRC, you have to do that
manually
using the supplied serial cable.
On Sat, Apr 27, 2013 at 9:22 AM, jimathome80@ <
jimathome80@> wrote:
**
Hi
Can anyone help?
I'm trying to setup a simple system of an 1 x aads 1 x tps4l and 1 x
idoc
in adagio composer/system builder.
The problem I'm having is I'm unable to see the idoc when I use the
device
discovery wizard. I've set up ip communications between the aads and
then
crestnet commutation with the tps4l on an I'd of 03 but it asks for
the
serial number of idoc?
All equipment is connected to my router what am I missing or doing
wrong.
Sorry in advance for the basic question...
[Non-text portions of this message have been removed]
