开云体育

I've probably always done them step-by-step in the past, and I guess most of my other systems have been panel-based with scattered EX where it makes more sense. Never had to do 60 all at once (I set

I knew I wasn't crazy, at least on this topic. Button properties property to modify:simulation mode Too funny, "old school vtpro" It still is current, thankfully.

+1 on batteryrefill.com

I used batteryrefill.com about 3 years ago on aTPMC-10 for my home and it worked fine. The battery fit a litte tight when I got it back, but with a little extra force the cover snapped in fine. Steve

The Leviton Controller, that's the VRCOP you are using correct? Thinking of doing this as well!!

You can get Vivotech VS8102. NVS is actually rebranded Vivotech servers Best Regards Artur Zabludovsky [Non-text portions of this message have been removed]

You absolutely right about step by step connecting. Saving ALOT of time and brain damage. Best Regards Artur Zabludovsky

The tv might physically detect the insertion of the 1/8th plug. If you have a 1/8th stereo extension kicking around, plug it in by it's self and see what happens. I was going to leave a permanent

Yeah you're right. In old school vt pro it has active and inactive states and in the new core 3 hotness it has modes and technically the old school one has modes too but if you only needed pressed and

But aren't there settings in vtpro for the button to have a different state or behavior? I never use it, but I swear there is. I will look in the morning when I get to work. I may be getting TP4

Yes, Neil posted some very nice pics on how it works. I wish I would have had that when I was trying to understand them. Just do a mock program with an xpanel or something and get to testing. Nothing

Hi B That would be great, did you receive my previous email?

I can't really say for the crestron dimmers, but back when I did C4 I had to leave power disconnected to certain dimmers when I was acquiring the others. What I mean is, if you have a 4 story house

Right we've really only needed the swex units for some outdoor loads (if I recal correctly the dimex is rated for 700 or 750W and the swex will do 1000W...

Can you run a wire of the exlink thru a relay that you close, fire your "On" command then open? Etc.

Hi all, I was having the same socket error -1 problem on my CP3. Tried it on my Pro2, and voila it worked. Updated CP3 firmware... voila it worked on that. Apparently CP3 had some funky ethernet

Ken - thank you very much! From: Crestron@... [mailto:Crestron@...] On Behalf Of Ken Brunner Sent: Wednesday, March 20, 2013 4:22 PM To: Crestron@... Subject:

The DIMEX's work fine when set in switch mode, in my experience.

Can you use a non-dimmable load like a florescent light with a CLW-DIMEX-P set in switch mode or do you have to use CLW-SWEX-P?

I have a larger module that supports up to 176 zones, including individual status feedback. Send me an email and I'll reply with it.