开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Needed: 2pcs of Crestron CEN-IO-IR-104 IR Expansion Network Module

 

Hi All,
anyone have one of these that they'd like to get rid off?

Regards
Re: CLEI DIMUEX Phase

 

It’s in the quick start guide.?


pull the air gap, press and hold the bottom button the close close the air gap button and it will set the dimmer to forward phase.?


if you need to get it back to auto, same procedure but hold the top button.?
Re: Crestron Go help needed

 

开云体育

OK, guys – i got it working.

Deleting and reinstalling the CrestronGo app did the trick.

?

Cheers,

Thorsten

?

Von: [email protected] <[email protected]> Im Auftrag von Thorsten K?hler
Gesendet: Sonntag, 16. April 2023 12:23
An: [email protected]
Betreff: Re: [crestron] Crestron Go help needed

?

Hi all,

?

communication should be open, nothing blocked.

But i?ll move the iPad into the same subnet just for testing and report back.

?

Everything else (files, etc.) seems to be OK.

?

Cheers,

Thorsten

?

Von: [email protected] <[email protected]> Im Auftrag von stefan.mehre
Gesendet: Sonntag, 16. April 2023 12:06
An: [email protected]
Betreff: Re: [crestron] Crestron Go help needed

?

Hi,
so for this seems to be an issue that the iPad can‘t reach the processor or better not
with all necessary connections.

Because you don‘t get an error message I can‘t believe it‘s a configuration or misplacement
of the files. Because you stay in the connecting state I am pretty shure the iPad didn‘t connect
to the processor.

You really need to check if the communication between the subnets is blocking all or some?
communication. You need the https and the CIP to be able to reach the processor.?


If the communication between subnets is working, maybe try an user with more rights than connection only.?
I had issues, mostly with TSW Panels, not connecting with SSL if the user had limited rights. But not?
shure if that was a FW issue for limited time on processors and is solved.

Re: Crestron Go help needed

 

开云体育

Hi all,

?

communication should be open, nothing blocked.

But i?ll move the iPad into the same subnet just for testing and report back.

?

Everything else (files, etc.) seems to be OK.

?

Cheers,

Thorsten

?

Von: [email protected] <[email protected]> Im Auftrag von stefan.mehre
Gesendet: Sonntag, 16. April 2023 12:06
An: [email protected]
Betreff: Re: [crestron] Crestron Go help needed

?

Hi,
so for this seems to be an issue that the iPad can‘t reach the processor or better not
with all necessary connections.

Because you don‘t get an error message I can‘t believe it‘s a configuration or misplacement
of the files. Because you stay in the connecting state I am pretty shure the iPad didn‘t connect
to the processor.

You really need to check if the communication between the subnets is blocking all or some?
communication. You need the https and the CIP to be able to reach the processor.?


If the communication between subnets is working, maybe try an user with more rights than connection only.?
I had issues, mostly with TSW Panels, not connecting with SSL if the user had limited rights. But not?
shure if that was a FW issue for limited time on processors and is solved.

Re: Crestron Go help needed

 

Have you tried the blocked IPs command through text console to see if the IP is being blocked??

You can also connect to the processor and go to the authentication settings and see if the admin account is being blocked. If it is, set up a new user and use those credentials for connecting the app to the processor?
Re: Crestron Go help needed

 

Hi,
so for this seems to be an issue that the iPad can‘t reach the processor or better not
with all necessary connections.

Because you don‘t get an error message I can‘t believe it‘s a configuration or misplacement
of the files. Because you stay in the connecting state I am pretty shure the iPad didn‘t connect
to the processor.

You really need to check if the communication between the subnets is blocking all or some?
communication. You need the https and the CIP to be able to reach the processor.?


If the communication between subnets is working, maybe try an user with more rights than connection only.?
I had issues, mostly with TSW Panels, not connecting with SSL if the user had limited rights. But not?
shure if that was a FW issue for limited time on processors and is solved.
Re: Crestron Go help needed

 

When you placed the iPhone files in the HTML folder, make sure that you you are transfering two separate files, not the one folder.
Re: What is everyone using for IR with VC4? #vc4

 

I'm trying Lincoln's solution mentioned above, since I'm not having the luck that others apparently have with the Global Cache devices.? ?However, despite being set up how I feel is properly (same subnet, IP table pointing at the VC4's IP, etc) the RMC Scaler C that I've chosen for the task isn't coming online with its IP Table.? I'd had the same issue with the NVX devices that are also in the system, until I enabled the authenticated connection in their setup, and then they came online, but the RMC offers no such option.? I did go as far as to point the default router of the RMC to the processor's IP, just to see if it made any difference (it didn't).? I'm fairly certain there's something I'm missing, and I would imagine it has to do with the level of security that the VC4 is looking for, but so far I haven't had luck figuring it out.? Can anyone shed some light???

Thanks.

Nate
BACNet - register as foreign device

 

Hello,
?
have any of you ever used the BACNETRegasfd (register as foreign device) command from the processor console?
?
I want to communicate with a bacnet controller that is on a different VLAN (I can ping it from the processor), but registering as a foreign device does nothing.
?
Today I started testing those bacnet commands at home (with wireshark open) and - what puzzles me the most - when I send the BACNETDEVICediscovery command from the processor console I could see it in the wireshark (who-is query, BACNet APDU protocol), while when sending the BACNETRegasfd?command, nothing appeared in wireshark...
?
Then I checked "register as foreign device" option with YABE and pushing register button caused... the query (who-is, BVLC protocol) actually appeared in wireshark.
?
Could it be some bug in the software then? Has anyone ever managed to use this command and actually register processor as a foreign device?

I am using RMC3, ver v1.8001.4814.24421 for testing purposes.
?
Thanks in advance for your help!
Re: TSW-1070 Virtual Buttons

 

开云体育

If you are looking for the buttons to show feedback then that is not a feature.?
If you are just looking for button presses then, I just tested this on a TS-1070 using latest firmware without an issues.?

?Nate


On Apr 15, 2023, at 3:45 PM, wartyhogus <wh888@...> wrote:

?? How do I activate these ? I tried using the default Slot One in Simpl, my Signal works through Debugger (close App). However the button does not. I also tried VTPRO reserve Close APP and that does not work either. Previously I tried other command Volume , Lights etc. Never get response on the Virtual buttons. I feel like I am missing something very simple. Thanks

TSW-1070 Virtual Buttons

 

? How do I activate these ? I tried using the default Slot One in Simpl, my Signal works through Debugger (close App). However the button does not. I also tried VTPRO reserve Close APP and that does not work either. Previously I tried other command Volume , Lights etc. Never get response on the Virtual buttons. I feel like I am missing something very simple. Thanks
CLEI DIMUEX Phase

 
Edited

How do you force the dimming phase on a Clwi dimuex? ?Auto is causing flashing and I can see how to get reporting but not change the phase from auto to reverse to forward to see if a fixed setting help. ?Thanks
Re: Crestron Go help needed

 

What Justyn Said.
Also, in the Go app on your phone, make sure that you 'Enable SSL' and add the UN/PW of the processor (main or user account if set up)...

Other than that it may be an issue with your router rules between subnets like Dobias mentioned
Re: Consistent Warning on Pro3

 

also type "ENABLEFEATURE" in text console. ?You may want to disable some of those services as well.

Michael
Re: Crestron Go help needed

 

开云体育

Hi Thorsten

In the Crestron Go settings there is an option to allow access to the local network. This can randomly be turned off by default, but not in all cases weirdly.

Good luck.

Justyn

On 15 Apr 2023, at 12:01, Thorsten K?hler <thorsten.koehler@...> wrote:

?

Hi,

?

i need to get a project up and running using the Crestron Go app.

Some help on the basic steps are much appreciated.

?

What I did so far:
1) Loaded the Go app onto an iPhone (IOS 16)

2) Created a VTP project with “Crestron app” as panel (just one page). Projectname matches project file name.

3) Added Crestron Go app to the SIMPL program. Projectname “Crestron Go Project Name” matches the VTP name.

4) uploaded SIMPL program and uploaded the VTP-project to the processor.

5) added a user with “connect” rights to the processor, authentication is enabled.

6) configured the user above into the Crestron app incl. the other information (processor IP etc.)

7) clicking on the processor in the app shows “Connecting to System” and that?s it.

?

iPhone and processor are on different subnets, but ping between processor and iphone works (vice versa).

I?m also having trouble connecting via Toolbox to the Go-app (which should be possible I understand).

?

Any ideas?

?

Thanks,

Thorsten

?
Re: Crestron Go help needed

 

Thorsten,

if you’re able to send me the SIMPL and VTPro files I’ll load onto my test area and take a look for you. ?We have many CP3 processors and iPad Go apps connecting.

steve?
Re: Crestron Go help needed

 

开云体育

Are there firewall rules blocking traffic??

Verstuurd vanaf mijn iPhone

Op 15 apr. 2023 om 12:57 heeft Thorsten K?hler <thorsten.koehler@...> het volgende geschreven:

?

Hi,

?

i need to get a project up and running using the Crestron Go app.

Some help on the basic steps are much appreciated.

?

What I did so far:
1) Loaded the Go app onto an iPhone (IOS 16)

2) Created a VTP project with “Crestron app” as panel (just one page). Projectname matches project file name.

3) Added Crestron Go app to the SIMPL program. Projectname “Crestron Go Project Name” matches the VTP name.

4) uploaded SIMPL program and uploaded the VTP-project to the processor.

5) added a user with “connect” rights to the processor, authentication is enabled.

6) configured the user above into the Crestron app incl. the other information (processor IP etc.)

7) clicking on the processor in the app shows “Connecting to System” and that?s it.

?

iPhone and processor are on different subnets, but ping between processor and iphone works (vice versa).

I?m also having trouble connecting via Toolbox to the Go-app (which should be possible I understand).

?

Any ideas?

?

Thanks,

Thorsten

?
Crestron Go help needed

 

开云体育

Hi,

?

i need to get a project up and running using the Crestron Go app.

Some help on the basic steps are much appreciated.

?

What I did so far:
1) Loaded the Go app onto an iPhone (IOS 16)

2) Created a VTP project with “Crestron app” as panel (just one page). Projectname matches project file name.

3) Added Crestron Go app to the SIMPL program. Projectname “Crestron Go Project Name” matches the VTP name.

4) uploaded SIMPL program and uploaded the VTP-project to the processor.

5) added a user with “connect” rights to the processor, authentication is enabled.

6) configured the user above into the Crestron app incl. the other information (processor IP etc.)

7) clicking on the processor in the app shows “Connecting to System” and that?s it.

?

iPhone and processor are on different subnets, but ping between processor and iphone works (vice versa).

I?m also having trouble connecting via Toolbox to the Go-app (which should be possible I understand).

?

Any ideas?

?

Thanks,

Thorsten

?
Reverse Proxy VC-4

 

Hi all,

I'm trying to reverse-proxy my personnal VirtualControl Server with nginx without success.

Has someone managed to make it run?

Regards,
Re: IP Camera in Crestron App

 

It doesn’t, easiest way is via Crestron Go on an iPad. ?
6901 - 6920 of 256335