开云体育

Crestron has partnered with some software developer to provide an MDU property manager dashboard which can monitor all kinds of things with a pretty usable interface... I saw that a couple years ago

Sounds like an overscan issue; sounds like the switcher is presenting different EDID to the source than the TV directly is which you can usually fix either by copying the EDID from the sink (e.g. TV)

I haven't really had time to play with this so I haven't got the programming right for it yet. But that's not the immediate problem.? I wanted to make sure it was actually working so I connected one

Right-Click on the Touchpanel in the device symbol section of SMW, then select 'Insert Device Extender' , then Activity Detection...

Activity extender huh? I don’t remember seeing that, but I’ll check it out on Monday. Thanks much. Jim

add an activity extender on the panel. Set it for 300s. This "activity" signal will remain high until the timer expires, but resets every time the panel is touched. Attach the output of the activity

It’s for a job. Basically, I have a “Start Page” with a full page size button that takes you to the login. It works fine, but once logged in and using the system, I want it to exit back to the

Is this a specific Login page? or something that you're trying to develop for you/a client?

Being a newbie, I have to ask: can anyone steer me in the right direction on how to set a timer to drop out to the passworded login page? I can’t seem to figure this one put. jim

Yeah, I'm using AutoHotKey for basically the same thing! 1 second (1000) is plenty for that delay, but it's not necessary to unregister it first. That happens when you kill the program anyway. I'm

I tried to write a similar script for Toolbox, but couldn't get it to work correctly. I'm sure I was doing something wrong, but had already spent too much time on it and just reverted to the manual

Yep, pretty lame, but that's correct :-)

Worked like a champ - one thing to keep in mind is that the room name cannot have a space character or it won't load into the address book and it wont even give you an error.? Here is the script I

Agreed, Domotz was a fantastic tool for the original cost.... I've been using ubiquiti network since Luxul development got basically abandoned by LeGrand, so we found it very easy to start cancelling

Ah! thanks Tony!! I missed it... I was looking for (24) digitals to coincide with each input...'Like normal'... So we have to call/poll specific input#'s rather than just know all of them all the

yes, but the number to dial doesn't work without the full address book entry for that other touchpanel so I think I have to put the full "SIPADDEXT 105 192.168.1.215 KITCHEN" entry for each address

Those signals are on Slot-02 (Sources) of the SWAMP's Simpl symbol. I've only used the feature once, about 10 years ago, and was told it worked as expected. The system was programmed remotely, and I

Hi All, The Sonnex Tool in toolbox provides a lot of info about the SWAMP system, including if a signal (audio) is present on a source. I'm looking to use this info, but I don't see anything in the

They're ZIP files, you should be able to unzip them in C# to get a file list. Not sure what you'd do with them from there, it's just a bunch of DLL files. [email protected]> wrote:

Hi All, I have used network monitoring tools for ~10 years now, starting with iHiji. We are using Domotz now. Due to substantial $$ increases with Domotz (site pricing has gone from $16 to $35 in less