开云体育

Ok In my program TSW770 is IPID 41 with ip 192.168.10.11 and my control unit RMC4 ip is 192.168.10.12 (ip table was given to me by project menager). On the ip table on the control unit I have IPID 41

Has anyone had any issues lately with connecting to the old 2 series processors with toolbox? I was on site trying to connect to one and also tried a couple other i=ones back at the shop and says

Hello, I have RMC4 as my control unit and TSW-770 B S as my touchpanel, I had added ip table with my RMC4 ip number on my touchscreen but it shows offline, on the control unit ip table shows that

Did you set the parameters (IPID as in the program and processor IP/hostname) in the TSW770? Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von norbert.pajek@...

I haven't checked in the last few years (I ask myself: "Why Would I?") but when I did my first HZ project~ 4 years ago there was no way to do it. 120 HZ dimmers, each hand-crafted by me...:( I did

Hello All, Yes I tried that many times the issue was different.... So apparently Johathan asnwered me for the same question on crestron community, the issue was that in my project name I used TSW-770

What Thorsten said. I'm sure that's your issue...

Hi, did you change the TSW application mode to “User Project”? You can do that via the Touchpanel GUI => Settings=>Applications=>Application Mode => User Project Cheers, Thorsten Von:

Hello, I have here my touchpanell TSW 770 B-S with firmware version 2.004.1079. I am able to sent my GUI project to the panel but everytime it reboots it enters crestron default mode. I cannot force

I have a D3Pro program with lots of Horizon keypads.? Once I get the Behavior Properties "just right" on one keypad, it would be nice to simply copy those settings to other keypads.? Does anyone

Hi, thank you for your reply I login into webinterface and configure network to specific ip adress, slave mode is off. Right now I am starting from begining to create a program (installation is not

I’m coding for one of these right now (awaiting actual unit), so this caught my attention. Have you logged into its web browser and configured it or checked its settings? See this article:

Hi, I never worked with the NAX-AUD-USB, just a rough guess: Are you sending a single AES channel to the NAX-AUD-USB? If so, try sending two channels. Best regards Crestronfreak55

Have you tried using it with a completely different multicast address range?

Having an odd issue and both Crestron and QSC haven't been much help. I have 16 AES67 streams coming from a Crestron NAZ-4ZSP that are going into a QSYS Core 110F. All of those are running fine. Clean

Well, I finally tried that, but it didn't seem to matter. Thanks, though! jim

I don't have any answers as I won't support the HOME platform (for these and other reasons), but if you reach out to me directly, I may be able to get you hooked up with someone at Crestron that can

Many smart home products are designed for people that live in single family homes as they require replacing existing things in the home or making other modifications to the property.? Products like

Anyone please?

Thanks This isn't the first time that there has been an issue with Crestron's providing weather data. I realize that changing over to a WeatherFlow tempest would be a significant undertaking for