开云体育

Does anyone know what the expected behavior for this situation is in VC4 (before I bug people at Crestron). Our lab VC4-PC3 was running a room with a program (we can call this "Room 1" and "Program

Thank you!

Hi guys, A few years back I did a large project using TCL displays as TCL were the sponsor for the client.? ?We worked with TCL directly in China and they implemented an IP control protocol for us

A while back Adobe Air changed hands and is apparently handled by Harmon now. To get the XPanel functioning correctly you need to download and install the runtime from their website found here:

You might try connecting via USB instead.? I've had cases with Crestron/toolbox stops work with Ethernet but USB is fine.? Usually a reboot on my computer and the CP4 resolves the issue. You might

Can you reliably connect to the CP4 via ToolBox/Text Console??

I just want to Save As a Vt project as XPANEL to test with onsite. When compiling, I get a message that installer.air cannot be copied.... I know Crestron can't make anything quick and easy, but what

Am stuck in a situation where Simpl Debug will not connect with a CP4. Either I get the 'waiting for device to initialize' or the 'cannot get any program information from the connected device....'

So I’ve had the opportunity to install quite a few of these. They are actually remarkably nice for the money. ?When they first came out they actually had a fairly nice set of discrete IR controls.

The following files and folders have been uploaded to the Files area of the [email protected] group. * /TCL TCL Universal.ir ( /g/crestron/files/TCL%20TCL%20Universal.ir ) *By:*

Hello, hope you guys are doing great. So, I just tried adding an Automate Pulse 2 hub (already configured by a 3rd party) to Crestron Home. The driver appears as ONLINE in the about tab, and all of

As Lincoln mentioned Verify the Card in the DM switcher and the Program definition. 2 Series CPU Card used 2 digit Hex the CPU3 changed to a 3 Digit. This bit a top Corp 500 when upgrading the cards

Thanks, Jeff. Yeah, I will be staging two seperste elements in SIMPL (stage 1, stage 2) and then present them to Lutron as one 3rd party Tstat. Looks like this will work...

Sometimes its the scaling on your Windows display properties. Set it to 100% instead of 150%.

It's something easy to overlook - though I am a little surprised TB didn't shine the light. Lincoln -- Lincoln King-Cliby Commercial Market Director Sr. Systems Architect | Crestron Certified Master

Are you for certain it's the Crestron Socket and the not the device. I've used the S+ tcp clients on a variety of devices without that issue. Here's my socket receive from a Vaddio EasyIpMixer which

Can the DM 8x8 CP3 handle multiple IP table entries so that it can be controlled from more than 1 physical processor? example 50 mycp3.localhost 51 mycp4.localhost

Fixed. I feel like a dumb ass. I could have sworn I triple checked that. Sent: Wednesday, June 26, 2024 2:40 PM To: [email protected] Subject: Re: [crestron] Processor not talking to endpoints

Has anyone had any luck with these TVs and getting discrete control? I have the ability to use HDMI-CEC, LAN, or IR control, but need to know if there is a solution I should pursue which others have

This is probably the problem will fix and report back Sent: Wednesday, June 26, 2024 2:34 PM To: [email protected] Subject: Re: [crestron] Processor not talking to endpoints [External Email] Is your