开云体育

Samsung BET series does not work with CCD. Could not get 232 to work either. The protocol is protected by NDA. Samsung never responded to the NDA request. Ended up setting the display to power on/off

Hi everyone -- I think I might have solved a decade old problem by accident... the issue as to why this GE Interlogix security system starts crapping out on its serial comms if you enable

A trick I have learned is that if you try to edit an event on the calendar, and then save, if you have accidentally put the scheduler.dat file in the wrong folder it will write a blank one and then

Assuming everything else is right, I believe the dat file should go in the NVRAM folder for the program slot not the root folder.

Hello! I'm trying to use the CCD Display Ethernet 2.0 Module with the Samsung BET Driver (For Model?LH50BETHLGFXGO) with the RMC4. However when I try to load the driver on the RMC4, I don't get any

My Swamp24 has died and before I hit up eBay for a replacement I wanted to see if there are any newer (still supported) matrix preamp / power combinations that people would recommend for use with

Is there a way to get a press feedback from devices like this.? We will usually will you doorbird or Ring Elite that has a dry contact closure.? In this case the Wizenet already exists and the

As MSTC said, use an XSIG and TCP/IP or UDP/IP for communication between the processors. Thats the easiest way I can imagine at least if you use digitals only. Analog/Serial sometimes is a little bit

Hi, i?m trying to connect my office PC to the Sony Bravia screen in my office using a E30+D30 combo (connected via LAN). I had it working some time ago with 4K and wanted to set it up again. However,

I cannot seem to make it work, this is what i uploaded to my MC3 1,Christmas Lights On,258,11252023,0,3,-30,\NVRAM\sch_cal1.dat,0,W,,PresetID=2 2,Christmas Lights

I have the same issue on my Pixel 8 Pro. Attempting to side load the APK still results in a message that the app is not compatible. Until Crestron updates the app there is nothing you can do about the

I had done a system like that multiple processors talking to a master processor. You can use UDP for all of your system creating a custom protocol with an header who identify the message is dedicated

I agree with the proxy

The module called Event Scheduler 2 will do exactly what you need. Its part of the built in Crestron database.

If you have port forwards open on your router, even if they're secure, you will likely have the *darkweb* pounding on that port to the point that it can create a sort of localized DoS attach. Try

seem to be fighting 2 issues someone trying to hack the system using obfuscated SSH port Crestron Go app taking way too long to reconnect, even moving to another app for a few seconds i connect

all i can say is the client loaded the apk and tried to install app not compatible this is a Samsung S23 Ultra

Never mind. I found a Roku at my house and tested that menu. It doesn't allow you to set anything. Just gives you information. Maybe forget the wireless network? Then it won't automatically switch

Does anyone know if there is a Simpl module to allow me to schedule lights on day after Thanksgiving and let that schedule run until the middle of January, Then have it turn off. I have looked at the

Have you tried the secret menu to see if it will allow you to completely disable wifi or set a static IP to it? Home x 5 > Fast Forward x 1 > Play x 1 > Rewind x 1 > Play x 1 > Fast Forward x 1