开云体育

is there any way a client can move the settings over for Crestron App/Go when buying a new phone?

Hi Craig, it seems that the DaVinci uses TTL, Crestron RS232. You need to add a TTL to RS232 shifter inbetween for correct operation. Give google a chance for such a shifter, should be just a few

Hello, Has anyone been able to integrate a SIMPL program with a DaVinci Fireplace? We have followed the limited instructions, have the recommended adapters and it works with the native DaVinci glass

It let's me edit my posts

https://community.crestron.com/s/article/id-5232

The links to help.crestron.com are links that describe what I am doing with the F6 command. Just in case the text version that precedes it is unclear with the brackets and all. That is all, just

That is the best place to move wireless devices from one gateway to a different one.

Boy they hid that good, thank you.

Click on other devices then the ultra small icon on the right in the middle called Auxiliary devices. You will find the tree of your processor, just find the device and delete it.

So I mistakenly added a CEN-RFGW-EX to a project and I can't seem to find a way to delete it. Is this not possible or am I just missing something?

Swap the processors in the program and make the CP3 the master.? You will see quickly if it is failing . . . From: <[email protected]> on behalf of Adam <adamfeare@...> Reply-To:

A relay is an easy test. You can at least hear them being triggered.

Thanks, that is exactly what I have but no activity through IR or I/o on the Slave. Could be that the CP3 is failing I guess.

I just checked on my CP3 and when I added a master address it did automatically assign F0 for the Device ID, as shown below. This is normal operation. In your program, have you added the "CP3 Remote

Thanks for the clarification, Duck. I see what you meant now. I had thought you were showing what you would do on the processor verses in the program. Also, as others have pointed out, you use

I agree, the comparison with crosspoints made it more confusing than clarifying IMHO. I also find EISC much easier to understand and use as you only need to get the direction of the signals right (or

That might be the funniest thing I read all day! Thanks for that. When it comes down to it, you have to do whatever it takes to win, even delete .DLLs hahaha!

I also have issues following your guide here or to understand what exactly you want to show. The only difference between EISC between program slots and between processors is the IP address the modules

That's ok that you didn't understand. My intentions were to help others who don't understand how something like this works. I either provided too much info or not enough. You are correct in saying it

once i dug down, it was my code that was the issue no problem with p&h across an EISC