开云体育

Click on other devices then the ultra small icon on the right in the middle called Auxiliary devices. You will find the tree of your processor, just find the device and delete it.

So I mistakenly added a CEN-RFGW-EX to a project and I can't seem to find a way to delete it. Is this not possible or am I just missing something?

Swap the processors in the program and make the CP3 the master.? You will see quickly if it is failing . . . From: <[email protected]> on behalf of Adam <adamfeare@...> Reply-To:

A relay is an easy test. You can at least hear them being triggered.

Thanks, that is exactly what I have but no activity through IR or I/o on the Slave. Could be that the CP3 is failing I guess.

I just checked on my CP3 and when I added a master address it did automatically assign F0 for the Device ID, as shown below. This is normal operation. In your program, have you added the "CP3 Remote

Thanks for the clarification, Duck. I see what you meant now. I had thought you were showing what you would do on the processor verses in the program. Also, as others have pointed out, you use

I agree, the comparison with crosspoints made it more confusing than clarifying IMHO. I also find EISC much easier to understand and use as you only need to get the direction of the signals right (or

That might be the funniest thing I read all day! Thanks for that. When it comes down to it, you have to do whatever it takes to win, even delete .DLLs hahaha!

I also have issues following your guide here or to understand what exactly you want to show. The only difference between EISC between program slots and between processors is the IP address the modules

That's ok that you didn't understand. My intentions were to help others who don't understand how something like this works. I either provided too much info or not enough. You are correct in saying it

once i dug down, it was my code that was the issue no problem with p&h across an EISC

As far as I know the regional portals are only when using Amazon Alexa. For Google you set the region on the module to US and use this link to link your processor

I've seen replacement power supplies mentioned for the PRO2, PRO3, and CNPWS-75, but has anyone ever replaced the supply in a C2N-SPWS300. If so, do you have a part number? Thanks in advance.

I have never tried to use slave before and don’t seem to be able to get commands to/from the CP3 ports. the cp3 is showing online and is slave on the ip table of the rmc3. ?In the Master ip of the

Looks like the number of assistants could be a new masters record …. NFH

I can confirm that 2.8003.0037.01?didn't fix it on my desk RMC4....

Have you guys noticed if the scheduler is actually working? I have a new job where the client is really into the scheduler and it seems to stop working. Its just a regular D3 program in a standalone

Version: 2.8003.00037.01 - Resolved an issue that would prevent a program from stopping correctly.

Don't forget to mention that that is the "discounted" early bird special there too.? After the 1st, it raises to $900. -- Jason Mussetter Control Systems Designer Mussetter Programming Services