开云体育

weird D-30 gives error with IP-ID 0E but accepts IP-ID 20--seem to remember some mention of this or similar

But you are technically using the CS, it is being used by the processor. As Lincoln indicated earlier, the processor sits behind the router along with anything you may have on the control subnet (much

I did this recently Player names must be exactly the same Order of the module matters (init needs to be above all others, followed by device modules) Remove all characters that are not A-Z,a-z it

So you tried it and it made no difference at all? wrote:

Thanks for your reply. But in our case, the Control Subnet port on the CP4N processor is not used at all! All equipment is located on the LAN port.

Im getting feedback that Analogway Eikos 4k are having supply chain issues, And I have project in need of one any recommendations for alternates on anyone not having supply issues this year?

Good morning Dave, Tony, I updated the firmware to 1.8001.5061.29979 but the problem persists. After the update-reboot sequence some notices started showing up in the error log about SSL Certificates.

STARTPROGAFTERROUTER ON should fix this for you. Under the hood there are two different components – the processor and the router. The processor sits behind the router along with anything you may

Hi Michael! We purchased Josh's module and have it working great for controlling the ICMP (had to downgrade from a 4 series to 3 series to make it work but that's OK - it's a known issue with later 4

a little not what I wanted, but you gave useful advice. Thank you.

It's so long phrase. I use Alexa Routines. For example, phrase (routine) "Alexa, hello!" start macros with voice greeting and execute some long command/commands.

It will look something like this: #Define_Constant MaxElements 20 Digital_Input Test String Array1[MaxElements][8], Array2[MaxElements][8]; Integer Array3[130]; Push Test { Integer i; SetArray(Array3,

Yes, I only need the numbers of matching elements of the arrays from which to build array3

Are you just trying to see if each element of array1 and arra2 equal each other? If they don't converter them to integers, using array1 as the element and array2 as the value for array3?

Have a nice day, everyone. there is a task, the meaning is below: string array1[a][8]; string array2[b][8]; integer array3 [c];? ? ? ? ? ? ? ? ? ? ? ? ? ?//you need to create a third

Do you have a link for this module? I searched around a bit and couldn’t find it online

Thanks for your reply. But I still don't understand why the processor works fine when we just restart the program and doesn't work immediately after turning on the power. This is almost the same as if

Dave, is this something that you recommend to be run for all 'N' processors? of is this just to try to solve this issue?? TIA! Though I expressly forbid the 'N' units on our projects, we did have a

Just FYI, the module that Josh Blanton sells to control the media server also has full projector controls for power/dowser/lamp/macro. Michael

Did you set STARTPROGAFTERROUTER ON?