开云体育

Take a look at the Crestron Module: press and hold v1.2 (cm) It will give you a separate 'Not Held' and 'Held' outputs that you can take separately from your button press to your toggle logic and

Hi, I have a new request from a old project to add Toggle Dim to some of the keypad buttons. This project was completed some years ago and we programmed the buttons to only Toggle the light(s) on/off

You might start with reviewing this previous thread...Unless things have changed recently, you may continue to be disappointed... /g/crestron/topic/94194951#249715

Hi Real Monkey Magic - interested to learn more about the module you have...

Hi AV Ninja - did you get any solution to this?

Hello, thanks for letting me join your little group. I've been a Crestron programmer for 13 years but it's always been small, simple residential systems. The one I'm working on now is seriously

FTR, we got things working with the strings as noted above. Seems to work great - 115k baud BTW...because we really need to turn it on quickly!...HaHa It still did take us 4 hours unrelated to the

How you set up FB massage for Crestron in BS player? Is it send UDP "name of feedback" in advanced section of movie files?

There is a third important setting when you want to control via lan hdbaset : in my memory it’s (in French, sorry) : ? mode attente ? activated in ? Réglage AV ? > ? sortie AV ? I don’t

There's 2 important settings in Epson projector menu: Signal I/O, A/V input to *ALWAYS ON* Signal I/O, HDBaseT communication to *ON*

My latest article, "Managing a Home’s Air Temperature Based on the PMV Comfort Model” is being published by the good folks at Residential Tech Today Magazine on their web site. Since the

Here's what we use: Power ON-- \x02PWD:1\x03 Power OFF-- \x02PWD:0\x03 Mute ON-- \x02MUT:1\x03 Mute OFF-- \x02MUT:0\x03 Input 1-- \x02INP:1\x03 Volume 50-- \x02VOL:050\x03

\x02PWD:0\x03

Many of the current generator installs they have an on board or add-on I/O and Relay board that can be programmed for various faults/statuses (Kohler calles it a PIM for example). We always tie into

Must admit, I love protocols that start and end with \x02 and \x03 :)

That's what I thought but their docu was confusing to me, with their example string... Thanks Eric!!

For Crestron you would use \x** to send a hex character. So, you would use \x03 not [0x03]

Hi All, I'll be working on a project with rs-232 control of a Seura Shade 2 TV and have the protocol doc. it lists the following for the start and end characters: ? Start with 0x02 (hex) ? End

I have one controlling a few different brands of fans plus some RF shades in the house. Jay's module works well, but I also have an ISY-994 controlling the same fans with some pretty simple commands.

We used to do this with our Generac and then Kohler. Just used a bunch of 120V DIN rail relays and then watched the inputs on the processor. Caleb Radecky | Manager, Online Products & Services