开云体育

Me too. Clients (and myself) with new Pixels arent happy. At least for me on my home system I have had to resort to keeping an Xpanel open on my PC and using Google Remote Desktop from the phone to

Hmm I have several sites where we have various VPL projectors that are hooked up 232 (because we need the user picture position presets for aspect ratio settings), and they are also connected ethernet

Hello All, I am working on a projector for the first time with microphones. I am running two Shure SLX4 units to Mic1 and Mic2 on a DMPS-300-C. I have control over the gain working, just can't get the

I second the recommendation from Lincoln using old DM-RMCs. I think many of us have a couple of these buried somewhere in old boxes in a dark corner of the office and I think it?s much better to

OK, yes – the Nexgentec suggested by me is definitely not a budget solutions… What are your friend?s requirements? I understand it needs to be low-profile? Install will be visible? Or are there

What colour are [~UNUSED~]? If they are not green, that's you're problem. Not in front of my laptop, but if I recall, Project>Recompute signal types

Thanks, Guys!! Oliver and David: The BackPack looks really cool!...So sad that it will be killed within the year...:( It's been acquired by Savant you say? then its probably DOA...HaHa...?

The following files and folders have been uploaded to the Files area of the [email protected] group. * /logfile - Unnecessary Ambiguous signals on Module Save.txt (

What version of Qsys Designer are you running?? From v9.5 upwards external control has changed for individual components using a module like Mathew's.? One has to enable each component individually

Has anyone controlled a QSC NV32H HDMI Switcher in Core Mode using Crestron? Tried MP v 5.2.1 and Mathew Klucznyk versions but no control. I get the Core to connect and Mute Controls work but all

Hi Mike, Did you get any closer to controlling the E70 Cam? Regards Flemming

@ckangis - see if you can upgrade your project to the new Cinema 70s. Much better unit than the? bottom of the line 1510. There is also the Extron SSP200.

Hi, there?s also the nexgentec NGTC-MCP4K: https://www.nexgentec.eu/products/interfaces/ngtc-mcp4k/ 1HE, half rack width. Cheers, Thorsten -----Ursprüngliche Nachricht----- Von: [email protected]

Hi Chris, Have you checked out the Artison Backpack P5? It’s only 5.1, but super slim (designed to go behind a tv) and the control is solid (we’ve done a module for it). Cheers, Oliver

We have used a few of the Marantz slim AV amps with IP control, and never an issue, BUT we have only ever asked for simple one way commands 0/1, source, volume,mute etc. The Artison Backpack 5 is also

Just a follow-up with this subject, as I have a project with NR1510's coming up... - Anyone had any real issues with IP control of the NR1510 units? - Also, are there any other recommended 'Slim-Line'

Human hearing might be logarithmic but your eyes are not. Moving the fader from 80 to 90% will result in dramatic volume change, that the fader movement does not represent. If I was coding it for

If you have video distribution, many can send IR direct like Binary MoIP and AV Proedge.? Our sales team still prefer Samsung TVs where IP control is a pain, so we still do IR for that.??I have

I'm not aware of any information at this time, other than?Crestron being a member. "Participant Members contribute to and develop standards they will later adopt and use. Participants can access

Hi Folks, human hearing uses logarithmic scale, therefore a logarithmic volume control should be used. The dB scale is logarithmic, therefore does the job well. However, if you want to adjust volume