开云体育

The reason for this is because of the silly decision to include half of the module on the application market download, and the other half of the module in the Crestron Database itself. Whenever there

I think I may know what your issue is!! The module you're using has external TCP/IP input/output connections - Are you using these, attaching them to a TCP Client in the Device Symbol section?? If so,

Hello ckangis, Seems like Rs232 connections are way more stable then IP connections. Those 3 I'm working on are connected via ethernet only, using 1 TCP/IP socket each on the ethernet slot of the AP3,

Hi All, I have *(2) TSW-760-W-S?and?(1) TSW-560-B-S* All new, open box - units just have been used for a little bench testing, but basically are clean and ready to go. All include the mounting

Daniel, I've been testing/refactoring my interface module for the RX-AxA series, which is ONLY IP controllable (IR of course) and I have not had any connectivity issues that you describe. I'm holding

Copying the module and related CLZ to local folder fixed this issue. Was hoping I could use the user module folders on this PC but it still does not work correctly. Would still like to know if others

Migrating to a new PC and cannot get the Cisco Room Devices 4.0 module to compile properly in my program. Opened the CiscoRoomDevicesWrapper v4.0 and cannot compile that module. Error: Statement

I am using Yamaha IP 3000 1.2. Also I opened the module in simpl to check for parameters about keep alive / connections and they are actually there. But I wasn't able to figure out a way to stabilize

I have an update about this: Removing \usr\alexaappdata files, re uploading the program, rebooting and re registering solved the problem. You still get a not connected message on echoadmin but if you

Hello, Im losing my mind here. We have 72 devices working in a alexa-creston integrated enviroment. During logic tests the devices suddenly stopped working. After a lot of chase-tail we found a room

Thanks everyone, Seems like you are right about this, probably something wrong in the keep alive /reconnect logic that cant be easily fixed. Em sex., 1 de abr. de 2022 às 03:31, Thorsten K?hler <

Hi Walter, Thanks for your comments. I wanted to ask if you are using the webex calls from the Crestron touch panel, trying to create a direct call to webex but I can't.

I agree with Steve, IR is pretty stable in general (especially via cable) and often totally sufficient, with RS232 next to the list. However, for Yamaha, i?m using the YNCA protocol and found that to

Yep, I seen this happen with several older projects.? System had been working fine for years.? I make an update to the system using newer Crestron software and all of a sudden all the iPhone/iPad

I know this doesn't answer your question. But since no one appears to have an answer for your question, thought I share a little insight base on my personal past experience.? In general, I avoid

Thanks for the insight, Ed – very interesting. I also did some additional reading about the concept. I guess I just have too much of an Corporate/Enterprise IT background to imagine such a technique

Hello, I'm working on a residence with 3 yamaha receivers, RX V85, RX A2080 and RX 3080. They are all using Yamaha 3010 IP v1.2 to connect and they all work fine with the xpanel app. The problem is

Hi Ed, Great information. Some followup questions: - Does the current VLAN switching software allow for control of multiple switches or just a "switch stack" or "virtual switch"? - I'm curious how

Jeff, In 2010 we were focused on VLAN switching, as it was much faster (instant seamless switching vs slow multi-second switching on other products). We produced control system drivers to make

The issue for me is all about Feedback display. Sending discrete volume levels work fine. our system uses the actual feedback of the unit to determine what the next value level will be i.e. if I send