开云体育

Thanks, I shorted pin 2&3 and saw the command looping back. I use putty to receive the commands from switcher. It connect directory to the switcher with USB db9 cable. I have tried both AV2 and CP3,

Hi, check the pdf: http://downloads.monoprice.com/files/manuals/5704_RS232_Control_120924.pdf http://downloads.monoprice.com/files/manuals/5704_RS232_Control_120924.pdf The unit seems to make use of

Your messages are broken up a little. Have you shorted pins 2&3 on the processor, sent a command, and received that same command (loop back) in debugger? When you say your computer is receiving

IIRC, AirControl became available with ATV v4

i kinda saw that but since is not working i figure it was for a newer version. any ideas why is not working? i have the right IP, i dont know what else to check

Says right in the help file for AppleTV V2

I am currently working with the same model. Can you give a little more insight into how you made the connection work? I'm using a TCP/IP client using port 9761 directed to the IP set on the display.

It was uploaded in 2014, well before the AppleTV 4 was available.

Do you guys know if this module will work with AppleTV ver 2 or 3? i believe AirControl only works on gen 4

Try Boland Communication, they have a 4K 31 pro monitor (broadcast type), serial control, etc. You might need to go around 2.2 with an Integral or something. Maybe some other broadcast monitor would

turn them off and see if the RF goes away . . .? From: <Crestron@...> on behalf of "weddellkw@... [Crestron]" <Crestron@...> Reply-To: <Crestron@...> Date:

Thanks for the suggestion. I created a new plug which had only 2, 3 and 5. Still had no luck. I guess it must be some settings that I did wrong. Something could be very basic. I have checked all the

I just need to turn it on and off, but the remote has gone missing. Thx in advance OP

Hi all, Does anyone know of a controllable 4k HDCP 2.2 TV available? We have a project which we need to certify as 4k compatible and it now turns out one of our TV locations will only fit a 32 incher.

UPB is a power line device, it doesn't have a RF radio of any kind. Those are not your issue Sent from my pocket computer

+1 for VPN - open ports - you might as well leave your front for wide open. Maybe no one will notice, but these days more than likely someone will

Also for installer remote access turn off multicasting under processor settings before you leave site Consequently some functions won't work remotely - notably database extraction - unfortunately this

Guys, Thanks for the feedback. What I've noticed is that all feedback & ReportLightLevel works fine after a cold start but breaks after a ProgReset or ProgLoad. I have another 8 here so I'll try the

It looks like LG changed the reply terminator, I think it no longer does what the current module is looking for. I've got this one working, only tested for volume and power though;

Currently working on a project that has eight floors and 10 din-cencn. I didn't encounter any issues wirh connecting to device either Ethernet or USB.? Sent from my Bell Samsung device over Canada's