开云体育

I just need to turn it on and off, but the remote has gone missing. Thx in advance OP

Hi all, Does anyone know of a controllable 4k HDCP 2.2 TV available? We have a project which we need to certify as 4k compatible and it now turns out one of our TV locations will only fit a 32 incher.

UPB is a power line device, it doesn't have a RF radio of any kind. Those are not your issue Sent from my pocket computer

+1 for VPN - open ports - you might as well leave your front for wide open. Maybe no one will notice, but these days more than likely someone will

Also for installer remote access turn off multicasting under processor settings before you leave site Consequently some functions won't work remotely - notably database extraction - unfortunately this

Guys, Thanks for the feedback. What I've noticed is that all feedback & ReportLightLevel works fine after a cold start but breaks after a ProgReset or ProgLoad. I have another 8 here so I'll try the

It looks like LG changed the reply terminator, I think it no longer does what the current module is looking for. I've got this one working, only tested for volume and power though;

Currently working on a project that has eight floors and 10 din-cencn. I didn't encounter any issues wirh connecting to device either Ethernet or USB.? Sent from my Bell Samsung device over Canada's

I've worked with three of them in the past. Never had an issue with USB. I seem to remember that it was DHCP out of the box. Have you pulled all the devices off the unit and tried to connect?

I don't remember any issues connecting to it with USB.

Got a Pro3 that is going to be exposed to the internet so I'm setting up SSL and AD authentication on it. Got it connected to the domain and authentication is working normally. However when I connect

Hello I have struggle with clients complaining about MLX-3. I am not sure if you guys face the same issues. I have done many different types of GUI, trying to make user friendly but still getting

Looks like I have the following for ID 01: kf\x20\x30\x31 0\r for Zero no Volume (0) and kf\x20\x30\x31 66\r for Full Volume (66)

I don't have one of these in front of me, but isn't the command for direct volume control "k f <ID> <VOL>"? I think you have to the TV ID to a number and use that number to get feedback. If I remember

We've found that the site has a very high RF noise floor across all channels. I've shut down wifi and other known RF devices and still end up w/ a steady blast in the 40-50db range. The security

Forwarding ports 23 and 80 on the router to Lutron...that sounds like a very bad idea. Use a VPN, or the connect Bridge as Joe indicated. Caleb Radecky | Manager, Online Products & Services Crestron

You need to forward both ports 23 and 80 if not using Lutron's connect bridge If you have a Lutron connect bridge, no port forwards are needed

So first off some comments: * Can't connect to it using USB even though the thing has a USB port on the front * Can't find it using Toolbox device discovery on Ethernet (PC & gateway plugged into same

So I'm integrating Crestron with Lutron shades and lighting using IP. All seems we'll but wanted to know if the Lutron processor can be connected remotely. I have forwarded ports on the router so I

Hi Ilya,Did you manage to get the feedback from the LG sorted? Tim