开云体育

Did you ever figure this out??

Something changed on either the SmartThings or Crestron side that introduced a bug in the code for an occupancy sensor connected a SmartThings hub. I've loaded an update onto github. In addition,

IMO, it wouldn't work very reliably because the Occ sensors have timeouts and can be tripped from multiple distances. You'd be better off putting a beam sensor at each end of the stairs and then

OP Try using the UN55ES8000 IR codes from the Crestron Database. Been using it for years for discrete's, up to this year's KS9000 Trey Sent: Tuesday, January 17, 2017 4:39 PM To:

Assuming 2 motion detectors (one at the top of the stairs and one at the bottom). One solution is to run the motion detectors into logic wave pulse symbols so the output of the motion sensor is

CoolMaster Net

Have a client that has multiple occupancy sensor in his staircase and would like to trigger different loads in different ways depending on which direction he is going. Up versus down of course.

Thanks for the reply guys worked perfectly!

Fair point Chip.

Are there any new hvac zone controllers that communicate in similar fashion to the old carrier comfort zone systems?

email me at kgossen at resitechsolutions dot ca. I have a couple questions to ask you first.

Any chance you wanna make a YouTube video of this process? :) Crestron@...> wrote:

One-way serial. The issue is one way serial port goes between 0 and 5 volts as opposed to the ?full? com ports which go between -13 and + 13 volts. Some devices prefer the ?TTL version" of rs-232.

Always send the RSPW 1 when the TV is on. I send it 1 second before power off every time. From: <Crestron@...> on behalf of "rickmcneely@... [Crestron]" <Crestron@...>

Phil, Are you saying to use the same commands, but on an IR port setup for 1-way serial? Or are you saying you have converted to just using IR codes?

I open up the theme in Studio, Copy the images into resources, create my Image Map, then create a Animation Style for it. Now I have the different animations available whenever I need one because they

Go into the TV menu and find SimpleIP and turn it on, even if you are only using rs-232. From: <Crestron@...> on behalf of "mingomaster@... [Crestron]" <Crestron@...>

Greetings. Has anyone been able to stream directly from the Flir to the TSW Panels ? If so can you suggest to me a configuration? Thanks

It's not possible to get this working in all cases. You have three options: 1) get power feedback from the display somehow (current sensor, light sensor, USB power detect, EDID detect), 2) use a

"Or put your DPAD signals (up, down, left, right) into a NOR and drive the STOP command from the output. As long as the STOP logic is only edge triggered, there's no need for any additional pulse