开云体育

I have to say I feel your pain. Having been tarnished with many Crestron-product-that-didn't-perform-as-advertised brushes (i.e. TPMC10, Adagio, early DM, MC3 (Video GUI), TPMC9, TSW750, etc.)when

I have a few things that I'd like to get rid of: - AMS-AIP with dual-AM/FM tuner card. Somewhat ugly shipping box (from AVAD). Clean unit. Has been sitting in the bottom of my desk rack for way

Hi folks I have a client with a busted STX-1700. It's often cheaper to see if someone has a used one rather than getting the unit repaired. Does anyone have one and how much? Contact me off-list

Have you tried loading using toolbox instead of upload from sb.

I had a similar issue a week or two ago. CP3 was the master and MC2E was to be the slave, both running the latest firmware (1.007.0019 for the CP3 and 4.003.0015 for the MC2E). I couldn't seem to get

The 32 vs 64 MB is DRAM (runtime memory), not Flash (file storage)...and I don't know that that change ever made it down to the AES -- I do know the AV2/PRO2/CP2E families saw this

After quite a bit of messing around with the new app, it seems there's a pretty big issue. Has anyone tried loading a non-Crestron theme? I have tried one fron NTDesigns, and the system just hangs

Had occasion to check in with NJ on this yesterday. Turns out that the command is case sensitive. program01.programsend is NOT the same as Program01.programsend. here's a script that is tested and

i have been helping a dealer with an AES system we determined that the AES needed repair & they just got it back the SB program won't load the MAC XPanel - insufficient memory (it did load before

I have just been to look at a job where the existing AV contractor has gone bust, and they are looking for someone else to complete the job. Currently there are 6 TV positions that are to be fed from

I'm far from sure the resolution will be the same, but I've seen almost identical symptoms with a master-slave relationship between two 2-Series processors using CUZ 4.001.1012. Rolling the

Well the thoughts of this "old grumpy" programmer is this, it seems like their spending more time and resources on developing products like "SHADES" and not focusing on well tested firmware for their

I think everyone needs to tell Crestron the very same thing. It is not ok to have dealers running around constantly because the product was put out before it should have been. 6 firmwares 12 tech

Hate to ask but how do I setup the DNS properly? I have a static IP from BT with ports forwarded to my AV2 for Crestron Mobile. My current settings are: LAN A Dynamic DNS servers - [router

Dino: I'm hardly a major player - as loud as I might be. Just an "old", (as Neil might say ;-) cranky programmer who doesn't like to have my bread and butter all mixed up. Believe me, I've had

We have had two failures on a job so far where a 2-series E-slave has quit working. Main processor is CP3N (not actually using the N-network here), this has happened once with 1.006.0026 firmware and

The solution at the moment in my case is to add file extension .vtp to the file name and then perform save as.

I'm having the same issues, as well as the same fears as you are Heath. I'm wondering if's an issue with he network switch the TSW's are connected to. I AM using the CEN-SWPOE24 and I have a sneaking

Glad it worked! Flash isn't magic. Chris

Master bytes.....