开云体育

On May 14, 2013, at 10:54 AM, Neil Dorin <neildorin@...> wrote:



Every Core3UI panel has a qwerty keyboard built in....
On 2013-05-14, at 8:50 AM, "cyberbri24" <cyberbri24@...> wrote:

I guess it's my time to chime in lol...

Been programming for 12 years. Starting out in resi and stayed there for

most of that time. Largest system was 22 TP, 20 zones of A/V, 250K theater
within, full smart home (HVAC, SHADES, JANDY, CCTV, you name it they had
it), and 6 full racks of gear totaling about $1 mil. This was all done only
having Essentials experience. From there and attending Intermediate class,
everything was easier because most systems was 1-6 rooms. After the market
crash I moved over to Commerical because companies have annual budgets to
spend and I got in with a few A/V commerical companies always needing
programming. I finally took my Cert class very recently but my current
workload (which is a good thing)has kept me from finishing my exam. I will
finish it at some point, just not sure if they make me attend another class
before that happens? Has anyone gone past the 3 months date?

I have been an admin of a few large RVSE systems. From 150 to 250 rooms,

I have yet to really use all the features such as room messaging or
scheduling as the client always had other SW for making the rooms available
so I never needed to worry about it. The clients mostly look for managing
and keep track of scheduling the events to shutdown rooms for better bulb
life, knowing the lamp hours for PM care and helping assist a user by using
the x-panel feature. The rooms need occupency sensors and IP cameras to
help aid in knowing if a room is really in use or not or just left on IMO.

Question I have, is there going to be a qwerty keyboard released yet for

Core 3UI anytime soon?

Thanks,
cyberbri

--- In Crestron@..., "jbudz1977" <jbudz1977@...> wrote:

RV Express has a Help Message and Help Response Text Field...


--- In Crestron@..., Lincoln King-Cliby <lincoln@> wrote:

Yeah, but I don't think RV Express (RV6) supports the messaging, etc.

of RV7 / RV SE... I could be wrong since it's been more than a few years
since I've seen anyone do RV SE so maybe that capability has been added [or
has been there all along and, as I said, I just have never had a need for
it]

Lincoln

[Non-text portions of this message have been removed]

--- In Crestron@..., "jbudz1977" <jbudz1977@...> wrote:

RV Express has a Help Message and Help Response Text Field...


--- In Crestron@..., Lincoln King-Cliby <lincoln@> wrote:

Yeah, but I don't think RV Express (RV6) supports the messaging, etc. of RV7 / RV SE... I could be wrong since it's been more than a few years since I've seen anyone do RV SE so maybe that capability has been added [or has been there all along and, as I said, I just have never had a need for it]

Lincoln

--- In Crestron@..., "roray32" <roray.stewart@...> wrote:

Hi,

I have TPMC-12 which appears to have developed a problem with its Cresnet connection. In toolbox I can see the panel on IP, looking at the AV2 it's connected to it lists no Cresnet devices attached. I have re-uploading the code and have also re-uploaded the firmware to the panel but this has made no difference. I can see the code on the panel but when operating it just carries out page flips, doesn't control the system in any way.

Panel is running firmware: 1.00.02.90

Any ideas as to what else I can check or try before I send it back for repair.

Thanks
Roray

On Mon, May 13, 2013 at 11:22 AM, Tony Golden <mrgolden@...>wrote:

**


I used the Media Player object for the first time last month, with several
TSW
panels, a couple of DGE-2's, and an X-Panel. We used it with an IDOC and
CEN-TRACK (AM, FM, XM, and AUDIONET).

Some of the features were nice, but I REALLY disliked not being able to
change
(easily) simple things like object & font sizes, placement, and even button
labels.

It was also VERY SLOW to startup. I don't know if that was because we were
using multiple sources, or if that's just how it is, but it was noticeable
and
annoying. Overall I wasn't impressed, and will continue to use "the old
way"
for those sources unless someone specifically requests the Media Player,
or it
gets a lot better.

--- On Monday, May 13, 2013 at 8:21 AM, Phil Bridges wrote:

Have any of y'all used this in a production environment?

I'm looking for opinions on its use, particularly with an iDoc and
Audionet.

On May 14, 2013, at 9:18 AM, Kevin Keenan <kevinfkeenan@...> wrote:



I have a project with 7 MLX-3 s and three gateways connected to a CP3 via a
Pakedge POE switch. Every time the customer loses power, the gateways lock
up. (They usually blame the remotes, but pulling the batteries or rebooting
the MLX-3 does not help) We have to cycle the power on the gateways and
wait about 10 minutes, then all is fine.

I am thinking about rewiring the gateways to use Cresnet instead of
Ethernet.

-Kevin

On May 13, 2013, at 18:51, "chrish172003" <chris@...> wrote:

just out of interest has anyone experienced any lockups with the mlx-3 on

the mc3?

panel comes unresponsive and then you have to reboot the gway to or pull

the batteries on the panel to get it to work again

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

--- In Crestron@..., Kevin Keenan <kevinfkeenan@...> wrote:

I have a project with 7 MLX-3 s and three gateways connected to a CP3 via a Pakedge POE switch. Every time the customer loses power, the gateways lock up. (They usually blame the remotes, but pulling the batteries or rebooting the MLX-3 does not help) We have to cycle the power on the gateways and wait about 10 minutes, then all is fine.

I am thinking about rewiring the gateways to use Cresnet instead of Ethernet.

-Kevin

On May 13, 2013, at 18:51, "chrish172003" <chris@...> wrote:

just out of interest has anyone experienced any lockups with the mlx-3 on the mc3?

panel comes unresponsive and then you have to reboot the gway to or pull the batteries on the panel to get it to work again

[Non-text portions of this message have been removed]

--- In Crestron@..., Eric Walters <sentry07@...> wrote:

Did you delete the SPIsWork folder and Recompile All?


On Mon, May 13, 2013 at 2:21 PM, coolaiddrinker <coolaiddrinker@...>wrote:

Okay so far I have tried all the options:

1. initialize the processor
2. upload a blank program
3. unplug & replug ethernet and cresnet
4. reload of the program.

The Internal memory of processor is about 2432 KB. My program size for zip
file is 1,016 KB and .spz is about 75 KB.

Total Signal names in my program are just shy of 1K. I don't believe that
my program is too big for it to actually handle and in residential,
programs are way bigger.

I tried the same program on a different AV2 without any hiccup. It has the
same firmware and same memory size.

Any other ideas perhaps?

I am sorry if this thread is getting dragged along too far.



------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links

[Non-text portions of this message have been removed]

On Tue, May 14, 2013 at 8:54 AM, Chip <cfm@...> wrote:

C'mon, you know... On, Off, and WTF?!...

- Chip


--- In Crestron@..., "eagrubbs" <eagrubbs@...> wrote:

Lol. One of my all time favorite phrases to adapt to a new situation.

They have potential though, give it a few years. Just make sure you

include the 3rd state for a new template. 3 states???????

--- In Crestron@..., "Chip" <cfm@> wrote:

"Dammit Jim, I'm a coder - not a graphic designer!"

If only I could make my company *not* sell Core 3...errr..."SMART

OBJECT" panels... I so would.

- Chip


--- In Crestron@..., "blcsnd" <joshjx@> wrote:

But at the moment you can user the fonts provided by the themes or

create a graphics for the object with the text and font you need instead.

------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links

--- In Crestron@..., "eagrubbs" <eagrubbs@...> wrote:

Lol. One of my all time favorite phrases to adapt to a new situation.

They have potential though, give it a few years. Just make sure you include the 3rd state for a new template. 3 states???????

--- In Crestron@..., "Chip" <cfm@> wrote:

"Dammit Jim, I'm a coder - not a graphic designer!"

If only I could make my company *not* sell Core 3...errr..."SMART OBJECT" panels... I so would.

- Chip


--- In Crestron@..., "blcsnd" <joshjx@> wrote:

But at the moment you can user the fonts provided by the themes or create a graphics for the object with the text and font you need instead.

--- In Crestron@..., "Chip" <cfm@...> wrote:

"Dammit Jim, I'm a coder - not a graphic designer!"

If only I could make my company *not* sell Core 3...errr..."SMART OBJECT" panels... I so would.

- Chip


--- In Crestron@..., "blcsnd" <joshjx@> wrote:

But at the moment you can user the fonts provided by the themes or create a graphics for the object with the text and font you need instead.

-----Original Message-----
From: "Brylliantworks" <bryn@...>
Sent: ?5/?14/?2013 4:49 AM
To: "Crestron@..." <Crestron@...>
Subject: [Crestron] Re: Add Fonts to Core3 Project?


You know what would be FANTASTIC? If crestron actually delivered a fully baked product that works like some actual thought went into it. You know how you've been designing panels in VT-Pro for the last 10+ years? Yeah, go ahead and throw all that hard work out the window. It's great because we've made it really simple this time we promise! So simple in fact you can't even change the font size, nevermind the actual font! Oh and you can go straight to hell if you've got non Core 3 and Core 3 only panels on the same project. Your customers (our end users) won't be able to tell up from down when they get done learning two completely different interfaces, nevermind the extra time and development costs of developing and maintaining two completely different platforms to you the programmers/dealers.

I'm beginning to think that angry midgets with ADD are developing Crestron software.

--- In Crestron@..., "j.mussetter" <jasonmussetter@...> wrote:

I think it's completely BS that you have to install an enormous several hundred meg program (that barely works) and another several hundred meg SQL server, and then use a beta add-on "just" to edit colors, graphics, or fonts in Core3. Why hasn't Crestron created either a stand-alone Theme Editor program or incorporated this into VTPro by now?

Anyone who claims that Core3 is production worthy, I would strongly disagree with them based on this alone. It is completely unacceptable to have to use beta software (ie: only on Labs) to make design changes to a production worthy technology. If you can't download a theme editor from their normal software server, then it isn't production worthy... conversely, if you can't change fonts, or colors on Core3 using production software, then Core3 isn't production software either. How long has Core3 been "released" now and the full set of tools that we need are still not in release status?

Sorry for the rant, but I'm getting sick of hearing "just install almost a Gig of bloatware plus some beta software so you can change the font from arial to <new font>". It's frustrating at this point, and nothing has changed in over a year.

-Jason


--- In Crestron@..., Neil Dorin <neildorin@> wrote:

If you have access to labs you can activate the theme editor in Studio and its super easy to add fonts to themes.

Sent from my iPhone

On 2013-05-07, at 1:29 PM, Tray Schaeffer <trayschaeffer@> wrote:

"I'm a doctor, not a bricklayer." ... I loves me some StarTrek :)

Tray

From: Chip
Sent: Tuesday, May 07, 2013 2:59 PM
To: Crestron@...
Subject: [Crestron] Re: Add Fonts to Core3 Project?

"Dammit Jim, I'm a coder - not a graphic designer!"

If only I could make my company *not* sell Core 3...errr..."SMART OBJECT" panels... I so would.

- Chip

--- In mailto:Crestron%40yahoogroups.com, "blcsnd" <joshjx@> wrote:

But at the moment you can user the fonts provided by the themes or create a graphics for the object with the text and font you need instead.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]