Kevin,
Don't switch them to cresnet. We saw lots of performance issues with
gateways and cresnet. Invest in a UPS so it doesn't loose power lol.
Nick
Sent from my eMail.
toggle quoted message
Show quoted text
On May 14, 2013, at 9:18 AM, Kevin Keenan <kevinfkeenan@...> wrote:
I have a project with 7 MLX-3 s and three gateways connected to a CP3 via a
Pakedge POE switch. Every time the customer loses power, the gateways lock
up. (They usually blame the remotes, but pulling the batteries or rebooting
the MLX-3 does not help) We have to cycle the power on the gateways and
wait about 10 minutes, then all is fine.
I am thinking about rewiring the gateways to use Cresnet instead of
Ethernet.
-Kevin
On May 13, 2013, at 18:51, "chrish172003" <chris@...> wrote:
just out of interest has anyone experienced any lockups with the mlx-3 on
the mc3?
panel comes unresponsive and then you have to reboot the gway to or pull
the batteries on the panel to get it to work again
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
