开云体育

Thanks! It could be this type of issue, as things seem to have calmed down and we have been running reliably for the last couple of days. Any idea if this kind of issue exists in the 3 Series?

Hi everyone, Just wanted to throw this one out there and see if anyone else has run into it. Have an open ticket with Crestron but I tend to get a quicker response from the forum so I'm giving it a

We have had the same issues at a clients house with a CP2E talking to a Pro2 and a Pac2mini. We have been working with Crestron engineers on the issue and they sent us a BETA firmware that seems to

Nice page for Mac stuff! thanks for the link, yeah looks like I can go up to 16G wish I thought only 8G were capable (don't know why) but ill update to 16!! !-- *Jesus Tossas* * * *Technology

I've purchased my macbook pro upgrades (new internal disk and memory) at OWC (<http://www.macsales.com>) just plug in the type of machine you have and they will recommend the proper part(s) good

Hold down Ctrl and hit refresh. It forces IE to download a fresh uncached copy. When I was a web designer this was a common fix to a common problem of old content. Nick Sent from my eMail.

For those running Parallels, My mac have stock RAM 4G. am planing the upgrade to 8G, Anyone have any particular brand tested to get better performance on the Crestron Apps or overall? AM thinking that

Thanks guys for the help. I appreciate it. Thom

This might sound silly but have you reloaded the webpage? I know it sounds strange but I've had this exact issue before. Clearing temp files via CCleaner and Internet Options does nothing until I

Hey guys, We should be pulling some hardware from two job sites that we are upgrading. AV2 with Ethernet card (C2ENET1) 433 MHz 1way gateway Tps4L with aluminum frame (2) Also, I'll have a complete 12

This will only remove the 64-bit web Xpanel executables, which is valid if you can't get the xpanel to *fit*, but they have nothing to do with the panel design.

http://www.grandstream.com/products/ip-video-surveillance/gxv3500

I always used the device extender in Simpl successfully. I do however run across a problem about 25% of the time where the unit will not properly report battery levels at all, not even in its internal

This is something I use when updating webpages. Open command promt and enter the following ( ipconfig /flushdns ) this will make sure it will reload from the server. Albert From:

Is the reserved join for battery level 17507? I'm trying to indicate the current battery level on a MTX3 and am not having success. Thanks.

Depends on the way the trigger to whatever module you're using is written/intended to be used but generally "only once". Most SIMPL+ logic, for example, is edge triggered -- the action occurs on the

Yes, only nitpick is that the -transmitter- needs to be set to autoswitch (the out of the box default) to allow either VGA or HDMI to be connected; there is nothing in the scaler to switch...what

Quick one, if I tie the < digital output to a trigger email event will it send the email just once, or continually send it until the < is no longer high? Cheers

Yea I got one on eBay today for 65$. Am I the only one that has a stock pile of equipment left over from jobs and its never what I need.... ? Lol Thanks for the help y'all.

Perfect - exactly what I needed. Thanks Chip