开云体育

I have a DM-RMC-100-C box that I am having trouble controlling a Vizio TV. The volume up and down commands ramp up and down unpredictably. A tap on the volume up button results in an increase of 1-17

which demo program mark? can?t find it??? what are the setup for the axis camera to be shown on tpmc-9l or tpmc-4smd?? thanks nf

I don't know what you guys are seeing but there is NO new crosspoint functionality. One of the engineers on control systems has said so on Labs.

You can use: one "ilock" for sources (put feedback back to TP) one "sio" with source names (each source button with corresponding two "abuffer" (one for each screen) with the screen button as enable

I downloaded the new Core 3 Control VTP file, over Crestron labs that includes a weather object and a clock. I have not tested yet but looks fine. -- *Jesus Tossas* * * *Technology Architect, Audio

Hello< Here It Goes, basically on my vtp poject i have drawn 2 screens and my sources(atv , sat etc), i would like to display fb when i select source connected to my Extron 8 in 4 out switch. so when

we've used cat-5/6/7 cables on cresnet for years. one pair for tx/rx and 3 conductors on both 24VDC and GND. No issues, but if heavy loaded over large distance you need to calculate power consumption.

Just uploaded a Core3 UMC clock HH:MM (one analog output). A fair solution until the native Core3 clock-object is released. -Stig

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/Core3Clock_v1.0.zip Uploaded by : avprosjekt

I know that Creston sells their own cable, but what is a good generic wire to use instead? Thanks. David Peddicord

Just uploaded the IR set I have. Not 100% sure what it includes as im not able to open it at the moment. If I remember, the last time i did a Hantarex it was a nightmare as only half the controls were

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /IR Drivers/Hantarex 46 LED SLIM.ir Uploaded by :

Ummmm... If they're the ones I'm thinking of they've been lurking in the shadows for at least 5 years now -- but the last time I tried using them they were "vaporlock the processor so hard on program

Hi all, I'm new to crestron, programming and this forum but i have several pieces of crestron kit that I'm going to try an integrating into a house that I've just built. Here's what I have: 1 x pro 2

I noticed the new Crosspoint Symbols that I first noticed in Studio are now in Simpl Windows. Anyone use them yet? They do look promising, but of course there is no associated help attached to them.

Just use a 1way crestron remote in ur program and make sure the rfid is correct.

What advantage do you offer over someone running a small linux box and using espeak or some other open source TTS software?

+1 on macsales.com

+1

Thanks for the info, that's really useful to know. Cheers