开云体育

A PMC-2+ and ptx-3

Just so you understand what's going on, when you connect multiple ecrosspoints to a single ccrosspoint, the digital signals update to the state of the last ecross connected. If there is no signal

Use the appstat command to verify that your devices are allocated the way you want. Sent from my mobile pocket warmer.

I've only ever used one mtx-3 but I remember having a similar issue. You may need to insert a device extender for every page like you have to do with the MLX-3 and until you do that it is really slow

Without knowing the specific error, I would suggest you make sure your firmware on the MC3 is up to date.

For the most part we have had few problems with the hardware. We did have a PoE switch that lost its configuration (with VLANs) twice. But it hasn't happened again. My only other gripe is that the web

Sweet! it worked. Thanks allot!

Use a past symbol. [Non-text portions of this message have been removed]

Is there anyway to shutdown a system time wise. For example I would like an MPS shutdown every night at exactly 1:00 am. What symbols would I need? Thanks

Merry Christmas for everybody! Signed, Rafael Costa iPhone

Anything specific you are looking for? I have a cp2e plus some other stuff I bought off a client that was going under. Pat M From: jbudz1977 <jbudz1977@...> Reply-To: <Crestron@...>

Thanks a lot Neil. I think I am going in the right direction, but I need to expand what I have. I have one ccross from the kitchen panel connecting to multiple ecrosses. Splitting it up to a ccross

You best bet is to use parallel sets of crosspoints a for different kinds of logic (AV, lighting, HVAC, etc.) That means a separate ECCONNECT for each set of crosspoints. I typically use a CCROSS for

I'm trying to figure out if my issues are in my theory, programming, or both. I use crosspoints well in a one to one situation. My question is, can I use one ccross to connect to a few ecross

The built in gateway can be shared; each program can reference it's own set of RF ID's (can't use the same RF ID between programs). External gateways are unique to a given program. Can't be shared (No

Can I share gateways between programs in 3 series processors? Scenario 1: (2) MLX-3's (each running on different programs in the MC3)from the built in gateway, with different RF-IDs. Scenario 2: (2)

Make sure you have the latest released firmware for the DMPS-300 and the latest released databases as well. John Pavlik Crestron Electronics, Inc. Director, Architecture & Design Sent: Monday,

I would look at Ebay, lots of nice deals there.

I am looking for a used 2 series processor to be used to drive some lighting at my house. I f anyone has a unit laying around an is in need of some quick cash, drop me a noe and we can discuss. Thanks

Does anyone know if the freezing issues have been fixed? I have been programming quite a lot of DMPS-300 and I am noticing long lengths of freezing when opening, compiling, saving etc.