开云体育

I have a system where the skill in the Alexa app keeps becoming unenabled, re-enabling it fixes it until it happens again.

From an old-timer: … the CN2 series did have limited DTS availability, as in not all time zones were available, however these devices were pre internet so relied totally on the internal clock. The

I've had Alexa voice commands to control my Crestron system set up ever since Crestron released the drivers for it.? Suddenly control of Crestron lights, etc. from the Alexa app, Echo Show devices,

Hello Tray, What was the issue that you found in the Matrox module? Thanks! -- Doug G

Cheers Lincoln, I appreciated the comprehensive answer!! Tim Greenbank Control Systems Engineer

Fantastic, thanks Josh that’s good to know. I had a feeling they did but certain “cheap and cheerful” devices shall we say seem to give the option to set the dates of DST ? Tim Greenbank

Just to follow up, installing a 32GB Sandisk microSD card fix the issues with my client's Roku that was having out of memory issues.

Update. It seems that firmware 14.1.4 does not have this issue.

Hi, Before I open a ticket with Crestron, I want to see if I am missing something. I have discovered that NONE of the -DSP cards, HD, 4K, 4KZ will down mix any LPCM multichannel with 24bit stream. 16

Hi Andrzej, i know this subject was talked about a while ago now but i have a possible job with lots of tridonic msensor g3. Am i right in saying that at first you addressed all the tridonic stuff

I use 2 modules. First I use the CCD VideoServer module for navigation, etc.? Then I use the Roku 3 Series module for direct app selection.? They work fine together and I found the combination to

As for a module, I use the Roku 3 Series Release module in the files section here. It works great but occasionally throws errors as something in the Simpl# is not correct. Unfortunately I dont have

The 3- and 4- series apply DST (Summer/Winter Time) based on the selected/configured timezone. The 2-series have no intrinsic concept of time zones but can configure DST (from among ‘none’,

Have definitely seen a lack of responsiveness on these 70 series panels. And over on the FB group theres complaints of it as well. It isnt all the time but enough to notice.

Crestron processors definitely do support DST offsets. When you set the time-zone, DST is automatically factored in. On 2-series, this was done via the CLOCK symbol. For 3 and 4-series, you can use

Definitely agree with Jeremy and Eric... I also find it helpful to assign joins so that the last digit matches what I'm using it for. So, for my source and destination signals, src1 might be at join

Hi Markus -- I'm pleased to see you took this and ran with it and found success! Here is what you are going to do to get access to function and media keys. It looks like you have already found the

I was able to re-enable control through the Roku iPhone App.

Hi all, I have a strange problem with one CHV-TSTATRF not reporting to any touchscreens. It had been working fine until I had the replace the batteries. There are four TSTATS in the system and the

On Fri, Nov 29, 2024 at 12:15 PM, Michael Caldwell-Waller wrote: > > I threw the code and the instructions into a Pastebin --- https://pastebin.com/c2MPHAZ0 > -- come back and search for this?later