开云体育

Hi All, Does anyone know what the secret handshake is to enable HDR within an EDID for DM chassis'???? Our setup is a Sony 715ES and a Trinnov Altitude16. Everything we do will either get Atmos and

Thanks again, Lincoln.

Attachments aren't allowed, but an HTML email can contain images.

Am I missing something here?? Can we post pictures to threads here?

Thanks, Well, guess I'll be doing that from now on.

To receive UDP traffic the IP address has to match what's set on the UDP/IP client. Set it to 0.0.0.0 to receive from anywhere, 192.168.1.0 to receive from that subnet, or a specific IP to receive

Most likely because that property does only show (at least as far as I can remember, and I don't have a PC with me right now to test this) if the project was created with the XPanel 2.0 Smart Graphics

Try using PacketSender -- a multiplatform testing app that lets you create and send packets (including UDP) for troubleshooting purposes like these. You should be able to poke hand-written packets

I was just making a change to a TSW that I've been working on over the past couple of months. I've never paid any attention to the project properties apart from to change the theme. Always seen the

That's kinda what I thought, so I just set up a very basic program with only a UDP symbol in CP3-01 IP address is within my subnet, in this case 192.168.10.254 port 6000. 1 on the enable In the

Anyone have an update on this topic?

Not all Radio stations are being broadcast in the same way. Might want to post the stations you would be using to have someone test on the different options

UDP is stateless, meaning they don't actually make a connection per say. One talks and just hope the others are listening. In simpl and S+ you have a single definition for UDP communications. You

In the past when I've been testing modules for kit I don't have in the office, that connect through TCP/IP, I've simply hosted a TCP server on another processor to mimic the device. I need to do

Check message 22975 It was all the rage in 2004! Not sure if Chip has kept that one updated ;-)

Sorry, I initially replied on mobile and was a bit harried… For multicast you need to use the multicast group ID as the address so that the processor/OS knows it needs to send the IGMP Join message

Thanks Lincoln. In this case, would I'd just use the IP of the sending device rather than zeroes for the octets; I'll keep my fingers crossed that this will function. Thanks! Mike

You would not be able to use 0.0.0.0 in this case on a properly configured network as the device needs to send a "join" message to the switch to let it know that it is interested in getting that data.

Have you seen the Masters videos - https://community.crestron.com/s/article/id-2015#MUX-421

There are video on YouTube. Just search Crestron Construct. They are a bit crap though and don't go into enough depth.