开云体育

More information about the pool heater would be needed to answer that question safely.? Generally there is 2 types of residential gas valves.? Those that open when provided 24 vac of power and power

If I have to do the 11 power cycle reset, how far does it need to boot for each power cycle to count?

Client wants his pool heating to be integrated into the Crestron Home system. The pool is heated via a Gas Valve opening and closing, are there any compatible Gas Valves with Crestron Home? Thanks.

I am pretty sure I have seen " Jandy Generic Serial Adapter Kit | AquaLink RS Home Automation Interface | 7620 " for sale -- at the price of $899, it led a group of folks to reverse engineer it and

Have you ever noticed, when you're not looking for something, you're constantly pushing it out of the way.? When you actually need it...BLACK HOLE.? I swear I had that cable in my hand within the

Presumably you know about https://iaqualink.zodiacpoolsystems.com/? ( https://iaqualink.zodiacpoolsystems.com/ ) That's where you can set up your own account and point it to multiple different

Thanks Joe.? I don't that that is possible to use a simple serial I/O in this case because it is a cloud system that I am sure has layers of security.? But it is good to know that it is possible to

Thank.? I wish that was an option.? The issue is it would cost a butt load of money to trench to the two Jandy systems, add lightning protection, and then even find an RS Interface.? The current

Several years ago while commissioning some Cisco VTC systems at the Pentagon, I ran into an issue with the Cisco RoomDeviceDriver 3.4.? This was a SIMPL# driver with no source, but I was able to use

Thanks Jay.? Looks like you confirmed my conclusions.? How I long for the simpler days with open protocols and a simple method to program those interfaces that doesn't rely on the internet or cloud

Hi Steve, To the best of my knowledge you are correct.? The S# source code is totally separate from the clz file.? S# source code is compiled in Visual Studio and like other compiled languages the

That serial interface might still work.? I would test it before abandoning something that works.? I have one operating on an iAquaLink system, although the Jandy folks say it won’t work . . .

Who understands how the System Key works? I only ask because I've had 24 hours of license fun and a strange thing happened. On an old take-over job, I was on site making a minor programming update and

I just tried a factory reset.? Now I can see it on my advanced IP scan software but not from toolbox.? Looking for the correct USB cable for this.? I must have one someplace.

I'm looking at the Jandy AquaLink 3.1 demo and unzipped the .clz file to see if there is any indication that the SIMPL# source code is available.? But I only saw some DLLs, DAT, manifest, and .config

Tray, the MC3 does not support the authentication needed for a gwexer. You will need to take the firmware back in the gwexer

As Mentioned check for CSAuthen on both ends and you may need to run the unlock / unblock User and IP after setting those. Do not rely on Authen info in tool box just run the command have found that

Try connecting with tool box Secondary Console. Or USB if those don't work and you cant find it with wire shark or angy IP only choice I see is try a factory restore.

I bought 2 PRO3's.? One for the main house for a upgrade from a 2 series.? That one was wiped and had no problems connecting.? The second one still has a project on it. Front panel shows that it

Seems like rolling back firmware to a pre-Auth version might be the answer. I was just stating that I did what you did and it worked on series 4 I know, not much help