开云体育

Try using 127.0.0.2 for both programs/slots.

I've done this before but its been a very long time. My understanding is you put and EIC in each program in the same IPID and set the ip address to 127.0.0.1 for slot 1 and 127.0.0.2 for slot 2. for

Like Fabio said, definitely delete the SplWork folder. Also, If you're running the program with local "Project" modules vs from your library, this also might account for not seeing the update if you

That does seem like a potential solution. Although, again, I verified that all the output files had current date stamps. But something wasn't getting triggered. I now kinda hope I see this issue again

I am trying to find a IR Code for the HDBT Input.. Any Ideas anyone?

Hi Terry, Also try the "Recompile All" from within Simpl+ (located on the "Build" menu). Again, this is within SImpl+ and not SimplWindows. For me, there have been occasions where a small modification

Your idea is the best, cresnet is about 38400 baus rate, super slow. You can also try the EISC but it will requiere having two running program and get things synchronized

I would make the MC3 a slave. That way all of the IOs including the EX gateway will be available in the CP3. I am embarrassed to say that I am not sure about the cresnet. I would assume that would

Hello, Here's my setup, I replaced a MC3 with a CP3N (RS-232 and the three IR functions have been moved over from the MC3)?but I also have a Crestron CLW-DIMEX-P controlled by the built-in MC3's

Thanks Lincoln! I had the same thought but without the product in front of me, I was not sure. There is a camera module from Crestron in the database but it’s for a single camera. Looks like I would

I have not used it but based on the description in the manual I think for manual control you'd probably want to recall the preset to force camera 1 (or camera 2) output and then only worry about

I didn't try that. I didn't even think about it as never use it. It *shouldn't* have made a difference as I know I was compiling the S+ module in question. But, I suppose it might have forced the main

Anyone use the two headed 1 beyond hawk camera? If so, I am interested in how to managed the manual control. I assume you would address each camera head and control each with separate modules….

Did you use 'Recompile ALL' (Alt-F12) or Recompile all from the Project drop-down? This is the only way that I compile programs now so I don't have to think about it...:)? ?(It might take a little

radioDOTcrestronDOTcom has been down for a couple years I believe.... but browsing stations via the media player object is not affected by that, per crestron's notes.?? other than that, no idea.?

I noticed it yesterday as we typically listen to some stations on the weekend. I also noticed radioDOTcrestronDOTcom is down. Let us know if you find something out.

Hi, Did you use the visibility receive part, I accidentally used the transmit part and that doesn‘t work for showing a widget/subpage. Another thing, I believe there is still an issue that Construct

I too had this happen, noticed it yesterday as we have about 8 of these set up in an Enterprise System at our University.?? About when did you notice?? I ended up taking one home to test and verify

Has streaming stopped for anyone? I keep getting a log in error.

Hey guys, I just had something quite strange happen - something I haven't seen in over 2 decades of Crestron programming. I have an S module with several other S and S+ modules inside. I needed to