开云体育

There is nothing built into the panels. You have to change the program and panel to create a password protection. In other words, you have to get the person that programmed the system to add this

I have key code protected settings pages on all our touch panels in our classrooms here at Dalhousie University. I am using: Password Logic (fixed pwd) (cm) module OR gate Simple_timer_v1_0_1 (cm)

I’ve done one, it’s just a full screen subpage that covers up the main menu screen and goes invisible when the correct passcode is entered. Mike [email protected]> wrote:

I believe that health and wellness is an important function of smart home technology.? With this in mind, and that people are looking for help fulfilling their new year's resolutions for fitness, my

Unable to find any resource to add device passcode on TS-1070 touch panel? Too many people touching the touch panel and i wanted to have locked. I do have access to Toolbox, processors and if any

TB just helped me fix this one, but I'd thought I'd throw it out here in case it hits anyone else. Visiontools suddenly stopped opening my projects, it would just give me "Error! Cannot create

Instead of adding another 363, why not just replace the existing 363 with a 351. Use the dual HDMI inputs of the 351 and ditch the costar. Use the signals in the Kaleidescape module to determine which

We had a similar issue a while back with the identical setup. We found that a simple reboot returned the system back to normal operations. Best regards, Michael S. Moran

Hi; Yes, spent a while on the phone with both Bob and Rusty ensuring it was correctly set up.? Rusty noted some messages about EDID errors when the M500 tried to play but was unable to actually

Last Co-Star/NVX install I did was years ago (OG NVX cards still on 1.x firmware...) but following the setup guide I had no resolution issues at all.

And the Strato and the M500 are paired correctly as per the “Co-Star installation guide” from Kaleidescape? Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von MSTC

But there’s all that fun cleaning up notices in SB . . . . From: <[email protected]> on behalf of ckangis <chris@...> Reply-To: <[email protected]> Date: Monday, January 29, 2024 at 7:40

You can also check Linked In From: <[email protected]> on behalf of ckangis <chris@...> Reply-To: <[email protected]> Date: Saturday, January 27, 2024 at 11:06 AM To: <[email protected]>

Don't know about res. Direct connect is fine. It seems like the switch in the mix makes things unhappy. ?On 1/28/24, 7:49 PM, "Eric Luckart" <[email protected] <mailto:[email protected]> on behalf

My recommendation would be to do all control via SMW, if at all possible. Controlling the audio is just two analogs/zone - Source select and Volume control My opinion with the OOTB stuff was that it

Strato on In1, M500 on In2.? Yes, I would have thought it would be easy . . . From: <[email protected]> on behalf of Thorsten K?hler <thorsten.koehler@...> Reply-To: <[email protected]>

I had a similar issue with my old AMS a few years back. I had previously saved all the original files and simple reloaded them directly to the AMS and rebooted. Everything came back to original, and

Yes, I seem to remember that issue with them when using simpl. I can try resending the firmware but was hoping for some rather simple fix. I myself have never done any programming with simpl on the

Do you have the M500 set to a specific resolution? What happens if you connect the m500 direct to the 363? If all else fails, maybe a small Amazon HDMI splitter will fix your issue.

I have never used the OOTBF on one of these. I do know when I have programmed them in simpl it would break most of the out of the box programming. I wonder if you updated or resent the firmware if it