开云体育

Hi Thorsten, I just found it in my spam folder, Thank you!!? I actually received a later version (2.1.10) from another poster so I'm going to work with that (though there's a few things I need to

Hi, JFYI – i sent you a direct mail a week ago. Hope that find you well. Just checking via the group. Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von ckangis Gesendet:

So This command will allow me to add an SSID reference. Does anyone know how you can 'Forget' an old SSID reference? I'm meaning remotely, via Console... TIA!

So I went down the rabbit hole on this because I have been interested in doing something like this myself. I know that this is not *rtp* midi, but on the other hand, every single MIDI device I have

yes, out of what I used the only thing I noticed was the volume fb. I have edited the module but only for things like volume ramp speed and analog volume input.

we checked & Samsung displays worked with direct connect to CP4 sent thru Atlona boxes. nothing at display - these flashers had visible flashing so easy to check wiring is pretty simple what are we

If it were me, for a purpose like this, I would buy an Arduino-type board, put a MIDI adapter on it (such as MIDI FeatherWing), and ask ChatGPT for the code to (as an example) "send program change 5

Hi All, Has anybody implemented rtpMIDI in Crestron? I want to send MIDI messages from a Windows program called ProPresenter to trigger automation cues. -- Cheers Phil

Thanks Greg_B, and ckangis, Odd, that was the first Module I try'd, and the RS232 had been work'n previously, so I was stump'd it wasn't going smooth. So then I invested in Changing to the IP

We're working on a project that we've been seeing noticeable command lag when commands are send via IP to a device (AVpro end-points and Sony TVs(IP control) ) We initially thought it was something

The Consumer Electronics Show (CES) is not just a show where new smart home devices are announced by manufacturers.? It is a show where new home health devices are shown for the first time.? Both

Greg B, You've used this module successfully in the past for ZA (and AZ other than Vol_FB)? If so, I might try it and customize it (it does way too much!) as it is just S+ and it actually includes the

I know this may be late but I have been using the STR-ZA3000ES module for the application market, It does appear to have the volume fb issue others have mentioned, I guess I just didn't notice it the

Sorry, check the files section, I just added the CLZ with the NewtonSoft fix

Yeah, well.. I'm at a service call that I should have left 3 hours ago.? The old AVR was RS232, So I would have liked to use that instead of trying to get a LAN Cable to the Device. WiFi is not

I have always used the IP version. Its in the files section - Sony STR-ZAxx v1.1_archive.zip ( /g/crestron/files/Sony%20STR-ZAxx%20v1.1_archive.zip ) Again, everything works great

Greg_B, Which R232 Module is that? I'm not seeing one.

Wouldn't v1.007 be a downgrade from the device's current firmware? -- Josh Winn The LiquidPixel Group

Hi All, For those who might have tried this, iPORT had an interface module (72101) that provides not only POE, but also ethernet for iPads when they are docked. If you have used them have you had any

The Crestron Simpl# library works fine for PTZ and for getting media URLS, I’ve used it successfully on several different camera models.