Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
Re: DIN Rail lighting modules (ON-OFF/DIMMERS) compatible with CRESTRON?
#lighting
¿ªÔÆÌåÓýI'm only releasing a driver for Simpl.? I will leave it up to someone else to write one for home.? Shelly has a nicely documented API but supporting their growing product line is quite a bit of work just for SimplWindows.? I'm already on my 21st release of the driver set. I personally use a bunch of their products in my home and have found them to be very reliable. Jay On 11/21/2022 8:21 AM, David Chramcow
wrote:
Will check them out right now thanks @jbasen. |
Re: DIN Rail lighting modules (ON-OFF/DIMMERS) compatible with CRESTRON?
#lighting
Will check them out right now thanks @jbasen.
Will you be releasing a driver for HOME as well? or only SIMPL?? |
Re: DIN Rail lighting modules (ON-OFF/DIMMERS) compatible with CRESTRON?
#lighting
¿ªÔÆÌåÓýShelly has a line of PRO relays that are din rail mountable and you can use the Shelly-Crestron drive I wrote that is available for download from my GitHub to integrate them into Simpl.? However, Shelly hasn't yet released a PRO line version of their dimmer yet. Hope this helps Jay On 11/21/2022 7:44 AM, David Chramcow
wrote:
|
DIN Rail lighting modules (ON-OFF/DIMMERS) compatible with CRESTRON?
#lighting
With CRESTRON's impossible ETAs for their DIN RAIL lighting units, are there any 3rd party DIN RAIL lighting modules compatible with CRESTRON via SIMPL or HOME?
Thanks. |
Re: Crestron Studio Nightmares Continue
On Sat, Nov 19, 2022 at 03:14 AM, Oliver Hall wrote:
Can you link to where the Unicode issue is discussed? ?Is this just a Crestron Studio problem IIRC this issue was encountered by a user who contacted Crestron's ANZ (Australia/NewZealand) Tech Support team. |
Re: Mobile Pro G and iPad Pro 11
#app
From previous discussions on this group, Mobile G Pro does not support that latest version of SSL and the version of SSL that Mobile G Pro uses has been depreciated.
A lot of people have complain that the Series 4 processor does not even allow you to add Crestron Mobile to the program and just use it without SSL.? My guess is that iOS 16 has remove support for the version of SSL that Mobile G Pro uses.? Is it possible to turn off SSL on your Crestron processor and see if that works?? That would confirm that it is an SSL problem. Also try deleting the app from the iPad App and then reinstalling it.? That has fixed several issue for me after an iOS update with the non-SSL mode. Steve |
Re: JVC NZ9 Control
¿ªÔÆÌåÓýHi Matt, ? sorry for the late response ¨C somehow my email SPAM-folder decided to declare the Crestron-group as SPAM all of a sudden¡ ? Yes, i was familiar with controlling JVC via IP, I was just hoping there was anything readily available. It?s sometimes pretty time consuming to work through the older modules in the app-market and find out which one fits and is still working and which functionality is missing because of new functionality in newer hardware. However, I received the latest protocol description from JVC and did my own module now. ? Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von programmers@... ? Hi Thorsten, |
Re: CNX-PAD8A advice: Solved
My 2nd replacement arrived with firmware 1.08, woohoo! I am going to put this one on its own 75w supply. Perhaps the fuse going out on my 75w in September was not a red herring after all. We are getting more power failures in CA so more cold start powerups (everything is UPS but no generator at night). I need to find someone to reload my two "dead" pad8a units (anyone in Silicon Valley reading?). Thank you to everyone who offered advice.
|
Re: Mobile Pro G and iPad Pro 11
#app
I can't remember if this works on Mobile Pro G but you might be able to export the connection settings from another working device and import them on the iPad Pro. I know you can do it within the Crestron Go app as well as the previous Crestron App.
|
Updating NVX user/pw in Text Console
I'm trying to add a user to several NVX endpoints in text console. I'm using the following commands:
adduser -n:username -p:password addusert -n:username -g:Administrators then just to double check, I do listusers and see the newly added user in the list with Administator under Access Level and Group. When I come back and try to connect with the new user/pw I get a Password Change popup that says "Your temporary password is expired! Please Create a new password." However, if I connect via the web UI, I can use the new user and pw without issue. Am I missing something? Can someone share any tricks you use when updating 40-50 devices? Thanks, Jonathan |
Re: Crestron Studio Nightmares Continue
First, please make sure that Flex SDK was set to Run As Administrator as shown in the following article: You'll then want to confirm that you can import a theme archive for standard theme like Neo, and compile it successfully without any modification. If you're trying to compile an International version of the theme, it seems there's a recent issue with unicode fonts. |
Re: Lightolier LM-2-2000 Manual
sent to personal email On Thu, Nov 17, 2022 at 8:27 PM F David A Coker <david.coker@...> wrote: Does anyone have a pdf manual for the Lightolier LM-2-2000 dimmer?? I need to replace several of these and, for the life of me, cant find any documentation for this bad boy.? Any help would be greatly appreciated. --
eugene grossi, md |