开云体育

similar to the C2N-UNI8IO is the GLS-SIM, which has two 0-10 inputs on it which could go behind the rotary dimmer.

In my house I monitor my "dumb" washer and dryer. For the washer it has a light that comes on when it is done- I just use a photocell light sensor taped over that. And the dryer is gas fired so I use

Well that reassuring because none of us use crosspoints haha <rolleyes>. Been using them forever and this issue didnt always happen so as usual we have another bug being introduced with an update...

I have controlled one with an irUSB (from videostorm). It was a fair while back and from memory we had to side load the app. Personaly I prefer the IP option but I assume Flirc would also work.

Hi Javier, As Brian said, since Forbes & Lomax are Contact Closure devices you can use C2N-UNI8IO to get the CC from the Buttons. For the Rotary button, you will have to select the 0-10V model

Javier, I believe that the Forbes & Lomax devices are simple contact closure. So, the short answer would be yes, but this wouldn't include their rotary dimmers. Also, I would be sure to mention to the

Hello everyone I have a customer who wants to buy forbes & lomax keypads, he does not want to use crestron keypads. Is it possible to control that devices with crestron? Thank you so much for your

I just wanted to follow up that adding a little bit of extra header information to the http request solved the problem. Thanks again to everyone that responded with suggestions.

I ran into the same issue in the past, just add a new button to the old layout an give it a random join number, convert again, this time the joins should be also taken over to the converted project.

Follow-up... Well! It did convert the project, with small text, but the BIG THING is that it did not copy *ANY* Joins!!!? so it is, as Natalie pointed out, not actually compatible... Typical Digital

I just confirmed that the issue indeed is caused by the presence of a Crosspoint symbol, and this is probably why Dave H was not able to replicate the issue at first.

Well, it?s as always depending on the use-case and the environment. Most people try to get their dryer and washing machine out of way to avoid seeing and hearing them – this includes beepers

Hi,?did you find the solution?

On the other hand I'm a big fan of having my washer, dryer, and dishwasher send my wife and I notifications when they finish their cycles.? My washer and dryer also beep when done.? However, I might

I'm still at the point where I don't see the allure of most of these smart appliances. I see value in something like a refrigerator or freezer being able to tell me that the temperature has gone above

Getting washer and dryer status into the system is something I'm very interested in myself. We are moving from a house with a washer and dryer that for the past 21 years have been faithfully sending

Thanks Thyce

Thanks Kenny.? I'll take a look at Postman Jay

Hi Jay, I use Wireshark at work exclusively on remote machines. I RDP into a remote server or PC, install Wireshark, then before starting a capture I add a filter to keep the files size down. It

This would be a use for Postman. I use it for testing any http stuff.