¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date
Re: Preference for Mini PC for "jump" box
If there are concerns about externals being able to connect to the network 24x7, it?s common practice that you have to request IT to open up the tunnel for a limited amount of time. That can become
By Thorsten K?hler · #233634 ·
Re: Preference for Mini PC for "jump" box
Hi All I¡¯ve been following this conversation and I usually install a rack mounted pc in my residential systems however costs don¡¯t always allow this . I am Interested In this mikrotik box . Is
By pearce.bruce <bruceadsl@...> · #233633 ·
Re: Macbook and Dropbox
I run Parallels with the files in folders on the Mac side (shared folders). I use GoodSync to do a one-way an auto sync to Dropbox. In this manner my colleagues and I can share through DropBox without
By l_codd · #233632 ·
Re: Preference for Mini PC for "jump" box
I've done it on residential only. On commercial only momentarily. One of the technicians/installers might have one of these boxes on his toolbox, so he just plugs it in when needed.
By Martin Szmulewicz · #233631 ·
Re: Preference for Mini PC for "jump" box
What response have y¡¯all received from corporate IT about setting up a personal vpn to their network? Sounds like a red flag for most
By Dave Dunaway · #233630 ·
Re: Preference for Mini PC for "jump" box
The vpn would allow me to connect to any device in the network as if my computer was wired to the same network switch. I do not have to open any ports, set up any dynamic ip, etc. I have to change
By Martin Szmulewicz · #233629 ·
Re: Macbook and Dropbox
I have been using OneDrive (also wastefully) inside Parallels on a Mac for a few years now and it hasn¡¯t missed a beat. I started with Dropbox but encountered those compile issues to which Kyle
By ElectricDogs · #233628 ·
Re: Macbook and Dropbox
Steve, I run fusion but I assume it¡¯s about the same as parallels. I¡¯ve experienced issues (usually permissions related) with accessing the Mac Dropbox in windows specifically when dealing with
By Kyle Goyer · #233627 ·
Re: Samsun UN82RU8000F Control
Try Samsung IP demo from application market. Tested on RU7400 series it works fine.
By Gius Sarg · #233625 ·
Re: DMPS-300-C CEC
It was much simpler
By Steven Hedges <steve-hedges@...> · #233624 ·
Re: DMPS-300-C CEC
Thank you all, that worked like a charm. I¡¯m used to the 3 series DMPS units but the old one confused me somewhat.
By Gary Rowland · #233623 ·
Re: Party Mode for Swamp
Sorry if this is a bit too basic but I greatly benefited from this advise years ago and hope it will help others... I haven't seen the Sample Program, but generally I would scrap it and start fresh.
By ckangis · #233622 ·
Re: Preference for Mini PC for "jump" box
Why wouldn¡¯t you use a VPN? The vast majority of my projects don¡¯t have any form or permanent remote connectivity for various reasons but the handful of large projects where the end user (vs.
By Lincoln King-Cliby · #233621 ·
Party Mode for Swamp
I have 32 audio zones. Trying to add a party mode to the Sonnex sample program. Any suggestions how to start ? Thanks
By wartyhogus · #233620 ·
Macbook and Dropbox
I finally broke down and installed Parallels for my Macbook since the battery life and touchpad performance was so bad in Boot Camp.? It looks like I have the option to share my Dropbox files from
By Steve Schnugg · #233619 ·
Re: Preference for Mini PC for "jump" box
Hm, well, to get secure network access? Am 01.02.2020 04:53:21 schrieb michael.orona@... <michael.orona@...>: Why would you need a VPN out of curiosity? And I use in a commercial
By Thorsten K?hler · #233618 ·
Re: Axis Camera and door control #crestron #axis
If you put the AXIS companion app on a small PC (NUC etc.) put companion in grid mode feed that into an STRXTX-100. The STRX can feed the TSW the multi camera grid then invisible buttons on grid
By RK-X · #233617 ·
Re: Preference for Mini PC for "jump" box
Why would you need a VPN out of curiosity? And I use in a commercial enviroment as well.
By NotAProgrammer · #233616 ·
Re: Hikvision event stream monitoring #hikvision
Using Onvif Device Manager, ( https://www.google.com/search?q=onvif+device+manager&oq=onvif+devi&aqs=chrome.0.69i59j69i57j0l3j69i60l3.3325j0j7&sourceid=chrome&ie=UTF-8) (
By Dave Dunaway · #233615 ·
Re: DGE-2 Won't Detect Local Touchpanel Automatically
I've been looking for a solution to this for awhile.? I want to perform a SYSINStall to reset the embedded windows partition to a factory default.? I need a CSY file to do this.? The DGE2 says the
By Paddy Reilly · #233614 ·